IPod classic connection

When I connect my 160 GB iPod classic to my computer, there's a capital "P" in the center of the bar at the top. Does anyone know why this is here, and if possible how to get rid of it?
Thanks

this P is supposed to be "iPod", this occurs only when you have the option of "display time in title" enabled ... if you choose not to display time in title, "ipod" will be displayed instead of that "P".
this is a bug, and i hope apple will find a fix to it.

Similar Messages

  • Ipod classic connects to Itunes for a few seconds, then disconnects. Cannot sync!

    Help! I have followed all guidelines to uninstall Itunes and related software many times in the past two days. I have reinstalled multiple versions (downgrades) - none have worked. I have tried disabling processes, running Windows in safe mode, and running Itunes in safe mode. I have tried reinstalling the driver. All with the same result.
    My ipod classic connects to the computer, shows up as a USB drive, and shows up for a few seconds in Itunes. As soon as it shows up in Itunes, the ipod screen says "synchronizing" (I do not have it set to auto-synchronize), then it immediately says "ok to disconnect." At this point, I can click the ipod icon in Itunes, but anything I try to do says the ipod can't be found (because it ejects itself when it's picked up by itunes).
    I have tried resetting the ipod (not restoring) and I have tried to connect it under a different user on the same computer with the same result. At first when I reinstalled itunes I kept getting error messages or obvious problems with the install, but I finally got what seems to be a clean install without any error messages of version 12.0.1.26. All the other version 12's gave me ituneshelper64 dll errors. Any earlier versions and I can get my library back in, but it isn't correct.
    I have a Sony Vaio running Windows 7 64-bit. I used my ipod many days a week to listen to books and music on the road. Please help!

    Indeed. I forgot about them. Thanks.

  • TS1369 iPod Classic Connection Problem

    My iPod Classic is not being recognized by Windows or iTunes. I spent hours going through all the troubleshooting scenarios today, swapping cables, iPod's, etc. I can't seem to locate an iPod USB driver in Device Manager, and there doesn't seem to be any troubleshooting steps to deal with this situation. Any suggestions?

    Hey there Joeyleo,
    It sounds like you are unable to use any USB accessories with your iPod Classic. I would use the troubleshooting from the following article:
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Here is step one to get you started, but there is additional troubleshooting within if needed:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip:
    If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Yet Another Faulty iPod Classic - Connects to "computer" but not iTunes

    In Oct 2009, I purchased 160GB Classic and is now out of warranty so unable to replace, and i am not too keen on buying another one (NZD $470 RRP).
    It had been working as per normal until Dec 2010 when I tried to sync the iPod on newly updated iTunes (10.1) then it started to freeze during sync and now, it doesn't sync any longer. It is howing as "connected" on the iPod and in "My Computer", but doesn't show up in iTunes at all.
    iTunes also freezes (doesn't work whatsoever) while my iPod is plugged in to my computer. I have tried everything that the "Apple" help sites suggest (the 5 "R's", formatting, disk mode etc) you name it, but to no avail.
    Trying to fix this problem is becoming frustrating and time consuming. My wifes iPhone 4 works perfectly so I know it's not the computer or iTunes itself. As I (had) trust in Apple products, I would expect this to last for more than 15 months.
    I have no idea how this all came to be, and would just like it to work as normal again. What a way for Apple to earn its' "money"...
    PLEASE, if ANYONE can help here, it would be very much appreciated.

    I purchased 4 x iPod Classic 160gb units between July 2008 and March 2009 (and a 120gb Classic with which we have not had a problem). One unit worked for one day and had to be returned and was replaced with a new unit. The other three all failed within the 12 month warranty period and were replaced by Apple. Of the four replacements, three have now failed about 15 months after they were replaced. Of course the units are outside warranty (in particular due to Apple only offering the greater of 3 months warranty or the remainder of the original warranty). The units haven’t been subjected to any forceful knocks and as demonstrated by the lack of physical marks on the units.
    To have 7 out of 8 units fail in this timeframe is in my opinion indicative of a fundamental flaw in the build quality or design of the units. After putting my case to Apple Australia I finally received a reply confirming that the units were out of warranty and nothing could/would be done - but they did offer a "thank you gift" of a credit of up to $125 at the Apple Store if I spent at least $425.
    I replied that this wasn’t satisfactory but took up the credit whilst it was offered to at least get some discount off a new 160gb Classic (more reliable I am led to believe!). I am now out of pocket over $770 with replacement three units and still have one remaining unit that could die at any time.
    Apple is no longer replying to my emails. If anyone with similar experiences would like to join together to put pressure on Apple to make good, or pursue other actions via consumer affairs, please reply on this forum.

  • Why wont my ipod classic connect with my itunes

    my ipod classic wont connect to my itunes

    Howdy sunsetsami,
    If you are having an issue with your iPod classic not showing up in iTunes on your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod not appearing in iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Unusual? iPod Classic connection/sync problem

    I have an 80Gb iPod Classic, and iTunes 8.1 running on Windows XP.
    With iTunes open, I connect the iPod.
    The iPod screen says connecting...synchronising...
    Then the iPod appears in the iTunes device list, and the iPod says ejecting...ok to disconnect.
    I am left with iTunes open, and thinking it is connected to the iPod, and an iPod which is disconnected from it's iTunes Library.
    If I try the sync button on iTunes it say synchronising for a little while, but doesn't update any files.
    The upshot is that I can no longer add or remove anything from the iPod. Although all the original data is still there, and the iPod plays fine.
    I have tried rebooting the PC, restarting the iPod, re-installing iTunes, and restoring the iPod factory settings, but I still have the same problem.
    Please help!

    if you get a solution to this problem, I have identical troubles on my hp running vista and outlook 07 on both my classic 80 gig and nano 16gig
    Message was edited by: Paulithimus

  • Ipod classic connection to imac

    I have a 20g ipod wheel. My imac has no fire wire connection as does the ipod. The computer won't recognize or charge the ipod when i use a cable from an iphone,iphone 3gs,ipod mini. it will charge fine from its firewire on its charger. I need itunes to recognize this device, any ideas?

    Your iPod is not an iPod classic. Check out this link to determine which iPod you have.
    http://support.apple.com/kb/HT1353
    Some older iPods cannot charge via a USB connection, only via firewire.

  • IPod classic connected to car radio

    I have a new iPod classic and à brand new Renault Megane. When I connect my iPod to my car radio by using a auxiliary cable, I only get sound out of the left speakers. Does someone know how to solve this problem?

    iDjeff wrote:
    When I connect my iPod to my car radio by using a auxiliary cable,
    Is the cable plugged into the headphone socket of your iPod?
    If it is, and the the sound plays through both left and right when you use headphones, that suggests that there is something wrong with the auxilary cable or where it's plugged into.
    Where does the auxilary cable plug into on the car's stereo?

  • Applie iPod Classic Connection Problems

    Hi there, me and my dad just bought 2 new iPod classics... Mines is working without any problems so far (although trying to figure out how to convert videos is ******* me off) but anyway his was working this morning before I left for work and I left it to update and download the newest artwork... Upon arriving home however his is unable to open up in iTunes and Windows Vista simply keeps trying to install drivers for the iPod everytime I connect it and ultimately fails everytime... Anyone have any ideas? Much appreciated

    Hey there Joeyleo,
    It sounds like you are unable to use any USB accessories with your iPod Classic. I would use the troubleshooting from the following article:
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Here is step one to get you started, but there is additional troubleshooting within if needed:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip:
    If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • IPod Classic Connectivity woes

    I can no longer connect my beloved ol' iPod Classic to my (or any other!) PC/laptop.  Other iPods connect just fine, I've attempted various other cables, resetting the unit, etc., all to no avail.  It will, oddly enough, connect just fine to my Bose player and can recharge.  But without being able to connect to my PC, I can no long modify any of my music.  Anybody out there had this problem?  My main concern is accessing/modifying my music on my PC, interfacing with the ol' Classic.

    Do the iPod Disk Diagnostic, as posted by tt2
    It wont fix your problem, but help us in troubleshooting.
    Have a nice day!

  • Solution to ipod classic connection and sync problems in windows xp

    Was having problems syncing and copying songs to my 80 GB classic on windows xp. Itunes would become unresponsive etc. Turns out these issues were related to a program called res.exe which is part of a usb mass storage toobox, which does not appear to be essential to windows.
    In add/remove programs, I uninstalled "USB Mass Storage Toolbox", and my ipod classic now syncs as it should.

    Refer to this article:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716

  • IPod Classic connectivity to Car Stereo problems

    I have an iPod Clas. The software version is 1.1.2.  My new car stereo will not recognize anything before 1.2.  Is there anyway to upgrade the software version of my Classic?
    Thanks.

    jfallon_bonedoc,
    If iTunes does not see any firmware updates for your model of iPod classic, and you are positive your iTunes application is up to date, then I'm afraid there is no way to update to another firmware version.  Sorry.
    B-rock

  • IPod classic connects but is not detected in Diagnostic as "No iPod, iPhone, or iPad found" will not sync no matter what I try. have reinstalled itunes, changed cords, restarted services. Just started happening very recently. diagnostics detection is key.

    I have a 120gb Classic that has been working, connecting and syncing flawlessly for years. Now it appears that (maybe since an itunes update) my same Windows 7 x64 computer that has not changed other than the occasional iTunes update will not detect my iPod, and therefore will not sync any more.
    The odd thing is that iTunes will sometimes see the iPod (not always), and Windows will also sometime see the iPod. Even when it does, and I click to sync a podcast (or anything else) it appears to go through the #1 and #2 steps and says it is syncing - Do not unplug, then appears to finish, but when you check the ipod after ejecting, nothing has changed. It looks like this has been happening for about a week, but my wife must not have realized that songs and other items were not actually syncing.
    I have tried uninstalling iTunes, downloading the 11.2... version available online now, no help. I have tried resetting the ipod, no help. I have tried changing cables, no help. every time I go through the diagnostics in iTunes, it fails the connectivity test and says "No iPod, IPhone, or iPad found.
    I am so frustrated. I have tried everything I can think of but even though iTunes shows the iPod, it wont sync....

    This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
    It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
    My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
    So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

  • IPod Classic connection issue

    Just bought the 80 gig Classic and have already had issues. See http://discussions.apple.com/thread.jspa?threadID=1243711. Finally got this resolved and synched the iPod to iTunes. Now, I can't get the d**n thing to connect again. The screen says CONNECTING Do Not Disconnect, then switches to EJECTING You May Disconnect. This thing is aggravating the crap out of me. With my older Zen Vision M, I installed the software, hooked up the device and away we went. I bought the iPod because I figured it was the best. Apparently I was way wrong! No support except for this discussion group (Oh, aside from the ONE call you can make!! Gee, which issue do I use my call for!) Anyway, I've searched and can't find reference to this issue, so does anyone have any ideas? If I can't get this resolved soon, it's going back to Best Buy and Apple ain't getting a good grade from me. Thanks for any help. BTW, it's iTunes v 7.5.
    Message was edited by: Eddie753

    I'm having this exact same problem -- in fact I cannot connect at all -- it says "connected" then immediately disconnects itself. Interestingly for me too not allowing the cable to click in also seems to do the trick.
    Definitely seems to be some sort of cable mating issue. Changing cables doesn't do the trick either...

  • Ipod Classic Connecting- Blue Screen of Death!!

    I downloaded iTunes 8.0 when it came out and ever since I downloaded it, I get the blue screen of death when I connect my ipod in. I am running on vista if that helps, any ideas on what to do?

    Hey Patriotbball5460,
    This issue is described here: http://support.apple.com/kb/TS2280
    Try uninstalling and reinstalling iTunes as described in the article.
    Jason

Maybe you are looking for

  • 10.6.8 and burning a cd bug

    Well, still working to rule out any other issues. But I have noticed a bug with 10.6.8 that after burning a cd from finder, the screen refreshes on the desktop to include the new cd, but still shows the old burn folder also.. EDIT: just noticed it's

  • Extracting x,y co-ordinates of SDO_GEOMETRY into two variables say x1, ya

    Hi All, I am able to store the output SDO_GEOMETRY into a variable but i am facing difficulties in extracting ordinates in sdo_geometry to two independent variables say xa, ya. Kindly suggest some solution. The procedure is as follows: CREATE OR REPL

  • Migration of Open Tasks when BPM Processes Change during major releases

    Hi This is the most often scenario faced by many project teams during Go-Lives of BPM Processes. We would like to migrate BPM tasks from older BPM processes to newer BPM process. And there is substantial changes done between two releases. Though I am

  • FR - User defined list not editable

    Dear Techies, We are having an issue off-late with respect to editing the User defined list that we created within Financial reports. When we open the FR Studio we are not able to see the list and not able to add new items to the existing user define

  • Orders outbound Idoc O/P proposal doubt

    Hello, I need to send Outbound orders Idocs when the Purchase order is released..Can any one tell me whether any standard requirement available to propose the o/p or do i need to write a custom requirement..If i need to write one which field i need t