IPod Classic Doesn't Charge in PC Port

     This is my first post, so bear with me.
So, I'm at school, and a 4th grade teacher calls me down to her room. She said she had two broken iPods w/ chargers. She gave these to me, saying that I could keep one if I could fix them. She wasn't very good with technology, and I simply charged the iPods and they turned on and operated. Except for one. I can use the second iPod if it's plugged into the wall and stand for it, but If I plug it into my PC, it shows the Apple logo and quickly turns off. Both iPods are 1st Generation 40GB iPod Classics. It doesn't appear in the iTunes window, so I can't update/restore it. Any help?
     -Ben

Agoris010 wrote:
...12V car charger is not working...
...Funny thing is it is charging with a 12V Parrot car kit with dock connector.
So the 12v Parrot car kit is different to the 12v car charger then? Or is one of these items actually the 24v charger you referred to earlier?
A few points to note:
Any Apple charger should be okay. If the wall charger is non-Apple, make sure to check the rating.
Whatever the source, the output from the charger needs to be at least 500mA. This "output rating" should be writtten on the device somewhere, as 5v 500mA or similar. If the charger supplies only 300mA (a common rating) this will not charge an iPod Classic.
Car batteries supply 12 volts. So a car charger needs to change the 12 volts to 5 volts. Some old iPods could be charged with 12 volts and some (not so old) iPod models could be charged by either 12 or 5 volts. However, the voltage was supplied on a different "line" (or wire) into the iPod. So a charger that changes 12 volts to 5, but feeds the 5 volts on the 12 volt line, will not change an iPod. As far as I recall, no iPod Classic can be charged with 12 volts, all Classics use 5 volts. (See point 5 about the definition of a Classic.)
A 24 volt charger (to which you referred originally) would presumably be for a commercial vehicle. So a charger designed for 24 volt supply in, needs to step down (change the voltage) to 5 volts out.
Here's a major point: is your iPod actually a Classic, as defined by this article; http://support.apple.com/kb/HT1353 ? If it is not either an 80GB, 120GB or 160GB iPod, then it is not a Classic. In that case, check with the article to correctly identify your iPod.
If your car charger has a plug-in lead, with a plug that can be turned around to supply the same voltage, but with opposite polarity, then you need to check that the lead is connected the correct way.

Similar Messages

  • Ipod classic doesn't charge from 24Volt

    MyiPod classis A1238 doen't charge from 24 Volt and from wall charger. It does from USB connected to my iMac.
    What could be wrong?
    All original cables. exchanging checked cables doesn't work either.

    Agoris010 wrote:
    ...12V car charger is not working...
    ...Funny thing is it is charging with a 12V Parrot car kit with dock connector.
    So the 12v Parrot car kit is different to the 12v car charger then? Or is one of these items actually the 24v charger you referred to earlier?
    A few points to note:
    Any Apple charger should be okay. If the wall charger is non-Apple, make sure to check the rating.
    Whatever the source, the output from the charger needs to be at least 500mA. This "output rating" should be writtten on the device somewhere, as 5v 500mA or similar. If the charger supplies only 300mA (a common rating) this will not charge an iPod Classic.
    Car batteries supply 12 volts. So a car charger needs to change the 12 volts to 5 volts. Some old iPods could be charged with 12 volts and some (not so old) iPod models could be charged by either 12 or 5 volts. However, the voltage was supplied on a different "line" (or wire) into the iPod. So a charger that changes 12 volts to 5, but feeds the 5 volts on the 12 volt line, will not change an iPod. As far as I recall, no iPod Classic can be charged with 12 volts, all Classics use 5 volts. (See point 5 about the definition of a Classic.)
    A 24 volt charger (to which you referred originally) would presumably be for a commercial vehicle. So a charger designed for 24 volt supply in, needs to step down (change the voltage) to 5 volts out.
    Here's a major point: is your iPod actually a Classic, as defined by this article; http://support.apple.com/kb/HT1353 ? If it is not either an 80GB, 120GB or 160GB iPod, then it is not a Classic. In that case, check with the article to correctly identify your iPod.
    If your car charger has a plug-in lead, with a plug that can be turned around to supply the same voltage, but with opposite polarity, then you need to check that the lead is connected the correct way.

  • HT1384 My iPod Classic doesn't appear to be charged. There is nothing on the screen. Has anyone else had this problem?

    My week old iPod classic doesn't appear to be charged although it has been connected to my laptop. Nothing happens when I select the menu. I've followed the trouble shooting suggestions but nothing has changed. I've shut down my laptop and rebooted it. Still nothing. Any help would be appreciated.
    Many thanks
    Nugget

    How long did you leave the iPod to charge?  Have you tried doing a hard reset to see if that makes a difference? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Ipod classic is not charging.

    My iPod Classic is not charging. I had it charged for a whole day and never charges. It will only turn on when plugged in. What can I do to get this work again.

    Most likely the iPod battery is dead.
    If you connect the iPod to a USB2.0 port and reset it, what do you see on the iPod Screen. Can you get to the Music menu and play music? or do you get the "Do not disconnect screen"?
    Have  a nive day!

  • Since upgrading IOS 8 my Ipod Touch doesn't charge.

    Since the upgrade to IOS 8 my ipod touch doesn't charge directly with the charger. It's not the cable or the charger. The cable works fine when I connect the ipod touch to my computer and start itunes, if I turn iphoto it still doesn't charge. And the plug works with the former ipods.
    Any suggestions?
    My ipod touch is 5th generation and I bought it 2 months ago. Even on the day of upgrade(before), it was charging with the charger.

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My ipod classic will not charge or turn on

    MY IPOD CLASSIC WILL NOT CHARGE OR TURN ON

    Important: iPod touch cannot be charged with a FireWire power adapter or FireWire-based car charger.
    Verify that the power source being used is working properly.
    If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
    Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
    Try another USB port.
    Try charging from a USB charger if available.
    If that does not help, try another USB cable if available.
    Learn more about charging the battery.

  • Ipod classic don't charge nor recognize by windows after itunes update

    Hi guys,
    Any solution to problem with the ipod classic and the latest version of itunes?
    I have the same problem as many other, my ipod classic don't charge nor is recongnize by my windows desktop, this start after I upgrade to itunes 7.6.1
    Apple guys any comment about this issue?

    Problem solve

  • My daughter bought an 4th generation ipod classic without a charger.  We are using the charger from an ipod touch and it won't charge.  Someone posted online that not all chargers will work on the classic.  Anyone else have this issue and any suggestions?

    My daughter bought a 4th generation ipod classic without a charger.  The ipod was working just fine, but then we tried to charge it using a brand new charger for an Ipod Touch.  It won't charge and someone online someone posted that there ipod touch charger worked on the ipad, phone and whatever else he had but it wouldn't work on the classic.  Anyone else have this same issue?  Any solutions?

    The ipod did not come with a power cord as we purchased it used from ebay.  The ipod was half charged when we received it and it worked well enough to transfer songs to my computer (the previous seller didn't delete their 2000 plus songs).  My son then used the same cord on his computer to transfer the songs, but processed an update to the ipod and after that,it wouldn't work.  So, I'm not sure if we received a bum ipod, an update issue or we have a charger issue, but the cord we used to transfer the songs came from my son's brand new ipod touch.  We've also tried 2 other chargers from ipods we have in the house, 1 being a wall charger. 
    One individual posted online that he took his ipod classic, mac and phone overseas with one charger and it worked fine on all but the classic.  So, I'm thinking that they cords may not be universal.  Online I've read that it must be a 6 pin firewire, high power 2.0 usb cord.  Or that I need to purchase an applie charger.  We don't live close to an apple store and I'm reluctant to order one just to have it NOT work. 
    My daughter is learning the hard way that buying off of ebay is not always the best solution to a cash strapped 12 year old.
    Any other advice is greatly appreciated.

  • 2nd Gen iPod Touch Doesn't Charge at all

    2nd Gen iPod Touch Doesn't Charge at all, not on pc or mac or wall or anywhere. I need the information on it, last time it was backed up was 2 years ago,cracked glass and bad headphone jack. can Apple help me get my info out of it? it is out of warranty, can i pay to have it fully recovered as if it never died?

    Try connecting it for a charging source for 24 hours.
    Then try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then see if iTunes can see the iPod so you can get info from it
    - Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store. They may or may not be able to get info from the iPod. It depends upon what is wrong
    Apple Retail Store - Genius Bar

  • HT1384 iPod Classic will not charge from wall outlet

    My iPod Classic 80G will charge from my computers and my iHome dock, but not from the wall outlet. The cord, outlet, and adapter all work. We know the regular adapter works, it's an Apple universal USB to wall adapter that charges our iPad. We tried other cords (have two), other outlets, and even my kindle 2-prong adapter. Nothing worked. Suggestions?

    Hello there, Anhaja.
    First off, great job in your isolating steps performed already. One step that wasn't mentioned is found in the following Knowledge Base article:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    For your particular model:
    How to reset an iPod with a Click Wheel
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Ipod classic doesn't free memory even if I delete music so I cannot download any new content

    ipod classic doesn't free memory even if I delete music so I cannot download any new content

    When you connect the iPod to iTunes, in the summary page, what do you see in the Capacity bar?
    How much is used for Audio, Others, video?
    Most likely you have high usage of others, which maybe caused by incomplete sync Operation and the iPod need to be Restored.

  • IPod Classic doesn't sync all music in my library

    My iPod Classic doesn't sync all my music.  When I view my music files, the files that do not sync re not bold like the ones that sync correctly.  All files play on my computer.

    The iPod can only Sync with one Library.
    Your best option would be to add all the songs to one Library and then Sync with that.

  • My new iPod Classic doesn't 'wake' when my docking station switches on (alarm setting)

    My new iPod Classic doesn't 'wake' when my docking station switches on (alarm setting).
    My old iPod Classic never ever let me down, and I used it in the docking station every working day for two years.
    But this new iPod Classic has let me down three times just this week!
    Any clues?

    While the iPod is connected to your iTunes, look (in iTunes) on the Device/Podcasts pane (tab) and make sure the Sync Podcasts option has been selected (there should be a tick in the box).

  • Ipod classic won't charge

    My ipod classic no longer charges with my car transmitter (monster) or memorex stereo with ipod dock. Both used to work just fine and it still charges with the usb that plugs into my computer. Could it have anything to do with updating firmware? I went from 1.0.1 to 1.1.2 around the same time I noticed the issue, just want to see if it's anything else before I go back to 1.0.1. Thanks for any help-

    What I did was buy a mains charger from ebay,they cost about a £1 or £2
    plus about £3 postage,it works great,at least now I dont need to use a PC to
    charge it up i.e on holidays or at work.
    P.S type this into the ebay search bar "ipod Classic mains charger"
    then change to "lowest first" on the right of the page.
    Hope this helps

  • IPOD classic won't charge with 10W IPAD charger

    I have an IPOD Classic, 120 GB, an IPOD touch and an IPAD.  The 120GB IPOD classic will not charge with the new 10W IPAD charger.  Charges fine with the original IPOD classic charger.  The 10W IPAD charger charges the IPOD touch and IPAD just fine.  Any one have any ideas what might be going on?

    It should work.  See here: https://discussions.apple.com/thread/3044169?start=0&tstart=0
    B-rock

Maybe you are looking for

  • Creation of xml file in r3 application server (AL11)

    Hi All I need to create xml file in r3 application server (AL11) using PI.Can we achieve this using file adapter or we need to proceed with proxy. As I tried with file adapter with FTP transport protocol. Its giving the error as "Unable to create new

  • Can't get Delete Process to work on Manual Tabular Form

    Help. My insert and update process works just fine. I can't get the delete process to work. I've searched the forum and found a couple of examples on what to do, but I can't get the examples to work. I get an ORA-01403: no data found error. Report SQ

  • Can't parse configuration  jsf-ri-runtime.xml

    When I try to do the Example about JSF in (How To Use JSF with JDeveloper 10g) and run it I found this problem SEVERE: Can't parse configuration file:classloader:/com/sun/faces/jsf-ri-runtime.xml and I have jDeveloper ver 9.0.5.2 and java ver 1.4.2.0

  • IPhoto library. How does it work ?

    Hi there. I am new to the whole iPhoto thing. But I went out and bought the iLife 08 and for me it just rocks. Everything I need to do.. It´s there. Great. But I can´t really figure out how the iPhoto library work !?... Normaly I just had all my pict

  • CCM 2.0 upgrade problem..

    Hi all, I have upgrad CCM 1.0 to CCM 2.0. After upgrade while go to Edit catalog: Following Error was coming: "Error when reading catalogs; error when reading master catalog". So i ran the report: /CCM/INITIALIZE_CME. After that i am facing problem..