Ipod Classic - Error 1430 when trying to restore
Hi, I recently plugged my iPod Classic 160GB into a hotel room alarm clock dock and when I returned from my trip iTunes is telling my I need to restore my iPod, when I try to do so I get the error message 1430.
I went through the help page found here http:/http://support.apple.com/kb/ts1372?viewlocale=en_US but still cannot find a solution.
Here are the Disk Stats:
Retracts: 12
Reallocs: 432
Pending Sectors: 40
PowerOn Hours: 13
Start/Stops: 1062
Temp: Current 28
Temp: Min 9
Temp: Max 47
Am I royally screwed? I've hardly used this iPod, need help, thanks, you guys are great.
Cheers
SOL
It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock
Similar Messages
-
TS1441 I continue to get error 1430 when trying to restore my ipod classic
A couple of days ago the battery drained very quickly. I also found that some songs although apparently on the ipod did not play. When I attempted to synch first time I was told that I did not have the authority to make changes. I eventually went the restore route but on my two macs get the 1430 message. (and it seems as if the battery has drained again?) My ipod is 5th generation classic.
Thanks for any help and a Happy Christmas!Then tell us what error message you are getting?
-
Currupt iPod and error 1415 when trying to restore
I have a 5th generation iPod, and can not sync my Ipod to put new songs in it. I have updated itunes to the latest version(7.0.1.8), reset my iPod. when I connect it to the computer it says iTunes has detected an iPod that appears to be currupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnection and reconnecting the iPod." When I try to restore and update my iPod, it starts then comes up with an error "the iPod "iPod" could not be restored. An unknown error occurred (1415)"
I tried changing the drive of the ipod, but it doesn't show up in "my computer", so it is not possible.
and help would be apprecieated
Dell latitude D505 Windows XP Prohmmmm. we just recently got itunes 7.0.2.16, toucann. do you have any better luck restoring the ipod using that?
iTunes 7.0.2.16 Installer -
Ipod nano gets unknown error -48 when trying to restore
Hi All
My Ipod nano gets unknown error -48 when trying to restore and download the software update. Specifcally, when I connect my ipod, I get a message saying itunes cannot access the ipod and that I should restore it. I go the the ipod tab, hit the restore button and the download begins (approx 16mb). The download completes, and then I get this message :
There was a problem downloading the ipod software for the ipod "ipod". An unknown error occurred (-48).
Please help !!!!!Even though not specifically listed, try the steps here:
http://support.apple.com/kb/TS1372
If you know someone with an XP windows machine try the reset utility on their computer. -
How do I fix a 1611 error code when trying to restore my ipod?
How do I fix a 1611 error code when trying to restore my ipod touch?
Click here and follow the instructions.
(120576) -
TS1538 Why am i getting error 9006 when trying to restore my ipod 5th gen?
Why am i getting error 9006 when trying to restore my ipod 5th generation?
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process. -
i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!
Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808 -
My ipod touch encountered some water and wont turn on. Is there anything we can do to get it working? It says error 3104 when trying to restore. thank you
Maybe here:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
I have got error (error = -3259) when tried to restore my iphone using itunes...unable to download the iphone software. I have tried serval times but the same issue happening again and again Anyone can help with this issue?
http://ipod.about.com/od/itunesproblems/qt/Fixing-Itunes-Error-3259.htm
-
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
-
Getting error -34 when trying to restore my ipad
I am getting an error (-34) when trying to restore my backup to my ipad after update to ios 5. Seems to be the same issue as: https://discussions.apple.com/thread/3374362
I have plenty of free space on my 64gb ipad but the settings keep getting defaulted to not downsample my music to 128kb. that would over fill my device. I have been on the phone with apple for over an hour with no end in sight. I have lost many data files including a recorded meeting from this week.
If anyone has any ideas I would love to hear them.
Thanks,
RAConfigure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process. -
My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
HT201210 what is error (1618) when trying to restore an iphone 5
what is error (1618) when trying to restore an iphone 5???
Try uninstalling iTunes, restart your computer and re-install iTunes.
-
Error -1 when trying to restore and update iphone 4s
After trying to update to new software 5.1 i got Error -1 when trying to restore and update iphone 4s via itunes
here part of iphone upadate log may help, i could not post all log it's too long
update_baseband: requesting baseband firmware data
update_baseband: received data from host (11207986 bytes)
update_baseband: performing next update stage
bbupdater: BEGIN: Perform stage at second
bbupdater: BEGIN: Sending 1 Images
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeMaverick
bbupdater: Hello response boot mode: ETLSAHModeMaverick
bbupdater: Hello reserved fields: 02
bbupdater: Starting Maverick Protocol
bbupdater: Sending Erase Response: Length 12 Type 161
bbupdater: Erase EFS 0
bbupdater: Checking Manifest Request: Length 40 Type 162
bbupdater: Sent Manifest with length 586
bbupdater: DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
bbupdater: Sending Hash Response: value 1 success 1
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModePending
bbupdater: Hello response boot mode: ETLSAHModePending
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'OSBL'...
bbupdater: 0x6e050 of 0x6e050 (100 percent)
bbupdater:
bbupdater: Took 0.229405 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: Waiting for Hello...bbupdater: OK
bbupdater: Hello received boot mode: ETLSAHModeComplete
bbupdater: Hello response boot mode: ETLSAHModeComplete
bbupdater: Hello reserved fields: 02
bbupdater: Sending Image 'ELF'...
bbupdater: 0x32000 of 0x12c0000 (1 percent)
bbupdater: 0x6013f of 0x12c0000 (2 percent)
bbupdater: 0x885000 of 0x12c0000 (45 percent)
bbupdater: 0x1085000 of 0x12c0000 (88 percent)
bbupdater: 0x119b000 of 0x12c0000 (93 percent)
bbupdater: 0x12b1000 of 0x12c0000 (99 percent)
bbupdater: 0x12c0000 of 0x12c0000 (100 percent)
bbupdater:
bbupdater: Took 6.138110 seconds
bbupdater: Disconnecting...bbupdater: OK
bbupdater: END: Sending 1 Images
bbupdater: Waiting 4 seconds...bbupdater: OK
bbupdater: BEGIN: Preparing Initial stage
bbupdater: Requested boot mode: kBBUBootModeNone
bbupdater: Creating transport, attempts remaining 0...bbupdater: OK
bbupdater: Modem booted
bbupdater: Ping failed, 9 tries left
bbupdater: Ping failed, 8 tries left
bbupdater: Ping failed, 7 tries left
bbupdater: Ping failed, 6 tries left
bbupdater: Ping failed, 5 tries left
bbupdater: Ping failed, 4 tries left
bbupdater: Ping failed, 3 tries left
bbupdater: Ping failed, 2 tries left
bbupdater: Ping failed, 1 tries left
bbupdater: Ping failed, 0 tries left
bbupdater: END(kBBUReturnIOError): Preparing Initial stage
bbupdater: END(kBBUReturnIOError): Perform stage at second
send_bbupdate_status: sending baseband update status to host
update_baseband: bbupdater error: kBBUReturnIOError
0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
1: BBUpdater/10
unable to convert ramrod error 1004
attempting to dump restore log
writing log file: /mnt1/restore.log -
HT201413 How do i resolve error 47 when trying to restore iPhone3Gs?
How do i resolve error 47 when trying to restore iPhone3Gs?
Hi alsoharryshine,
If you are getting an Error 47 when attempting to restore your iPhone, you may find the following articles helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
- Brenden
Maybe you are looking for
-
I have an application I'm submitting to our school website for potential students to fill out. There are sections for the student(s) to fill out as well as sections for staff to fill out. For the sake of security for the student filling out the form,
-
Hi, We have iProc all setup and working correctly. However we have a few items that don't show up when we search for them under Shop tab. The items that don't show up are the ones that don't have any BPA or ASL associated. For the items to show do we
-
Hi xi gurus, My Scenario is File(xml) -- to -- Proxy After the file is picked up from the directory,i must archieve the file in to another folder. In the adpter i had given the option archieve and the directory the file to be archieved. But iam gett
-
Color not updating once back in Final Cut
I've ben able to get by with Color correcting in FCS by using the built in filters in FCP. Now I have some secondaries to work on so I've sent to Color and got everything looking the way I want. I render all, then send to FCS. It comes over and it do
-
Bridge stopped display labels in thumbnails CS4
Today, Bridge CS4 stopped displaying labels (coloured ones) in thumbnails. It still keeps track of them, they show up in the large size display on the right and I can filter by label. I checked preferences and I have display labels on thumbnails chec