Ipod classic error unknown -50

I have a 160gb ipod classic,  when  synced with itunes and try to tranfer 8000 songs to it it will tranfer about 5500 (random number of songs) the it will show "unknown error -50 or -63", itunes will freeze and nothing would happen.  I've tried different tranfer combinations with no luck.  I can tranfer the same songs to my iphone.  Any advise would be appreciated,  thanks.

Error -50 is a connection timeout, when iTunes is trying to transfer huge number of songs to your iPod, see this support link.
http://support.apple.com/kb/TS1583
I would suggest that you split your songs into several playlist of 1000 songs, and sync 1 playlist at a time.
From all the posts with Sync problems, I think  that transfering to iPod Touch or iPhone is no problem for the Apple Mobile Device driver, only it doesn't behave well with iPod Classic, after all, not worth supporting a gadget that is becoming redundant, it will make iPod owners buy the latest Apple products.

Similar Messages

  • IPod classic error 50, 53, 69, etc solution that worked for me

    Giving back to the community that I spent so long searching in for a solution to this problem--even though I ended up with my own solution that may or may not work for you.
    I bought a 6th gen 160GB iPod classic and tried to sync it to my massive 14,000(+)-song library. The sucker would give me all sorts of errors (50, 53, 69) and never complete my sync. It said my files were corrupted or that an unknown error occurred yada yada. I looked on the forums for a solution and none of them worked. I sent that iPod back and got a 7th gen 160GB instead. SAME ISSUE. MY GOD. My only guess was that since both iPods came from a Mac computer there was some issue with it connecting to Windows--ever after reformatting it.
    So, I knew about formatting my iPod and then restoring it to try and resolve the issue that turingtest2 often would point out in many threads similar to this: iPod Classic
    What I never did was a full format. But more specifically, I never did a full format and waited for it to finish.
    The fix that worked for me was this (and I'm giving my exact order, even if the steps were unnecessary--as the fact that it worked was like a dream come true):
    1) Go to My Computer, right click on Computer in the sidebar and click on Manage.
    2) After the window pops up, click on Device Manager and then Universal Serial Bus Controllers.
    3) Make sure your iPod is plugged in, and right click Apple Mobile Device USB Driver and uninstall it.
    4) Now go to Disk Management in the sidebar. Right click on the iPod and select Format
    5) For format options, select file system as NTFS (I know, I know--but it worked for me), and UNCHECK Quick Format.
    6) Format it, and WAIT for it to finish. It will take a really long time.
    7) After formatting, plug the iPod back in and wait for the driver to install. Open iTunes and restore the iPod.
    8) Wait for the iPod to restore and then sync the music!
    If everything was done correctly it should work, possibly.
    My hard drive specs before this were:
    Retracts: 34
    Reallocs: 9344
    Pending Sectors: 0
    So, the specs were pretty bad, but it still worked for me.
    I actually just got done doing another sync and it still seems to be working fine.
    Good luck!

    I have had success with this method also, but it is not full-proof. Try the movie "The Incredibles". The audio will be about 10-seconds out-of-sync. (BTW, I own this movie).

  • TS1372 ipod classic error 1434 no restore

    hi i dropped my ipod and it stopped working, then it came up connect to itunes to restore, it wouldnt let me restore as it comes up (the ipod "ipod" could not be restored. An unknown error occurred (1434).) i then tried to do a disk diagnostic of my ipod classic and it came up with ERROR! Diag Halt. what does it mean? and can i fix it?

    hi i dropped my ipod and it stopped working, then it came up connect to itunes to restore, it wouldnt let me restore as it comes up (the ipod "ipod" could not be restored. An unknown error occurred (1434).) i then tried to do a disk diagnostic of my ipod classic and it came up with ERROR! Diag Halt. what does it mean? and can i fix it?

  • IPod Classic Error when connecting - I cant put new music!!

    When i plug in my newish (6 month old) IPOD classic to the Mac it immediately tells me -
    "Mac OS X cant repair the Disc "... ipod".
    You can still open or copy files on the disc but you cant change or save files on the disc.
    Back up the disc and reformat it as soon as you can.
    Also this balloon comes up -
    ".... Ipod cannot be synced". You do not have the privelege to make changes."
    This all happened suddenly.
    everything was working fine until yesterday.
    Sometimes I also need to force eject it to get it out.
    And when i attempt to copy a song to my ipod it gives me
    "Unknown Error - -61!!"
    If i restore to factory settings do i lose all my music?
    Or if i sync?
    Thank you so much for hopefully answering me!!:))
    Carlie

    Although your iPod is newish, can you do a Disk Diagnostic, as posted by tt2, you never know, if it has gone for a swim.
    https://discussions.apple.com/message/17776595#17776595
    This will help in troubleshooting, which of the hundreds probable causes.

  • Please help!! Ipod classic error message: "...cannot be synced. A duplicate file name was specified

    So I bought a "new to me" Ipod classic (gen 7, 160 gb) I have a gen 6-160gb already but I wanted the gen 7. I bought this one used from GameStop(i did purchase the warranty so if there is no solution I may have to put it to use). It was not restored to factory settings or anything when I purchased it. So to start out I restored to factory settings. It had originally been used for a Mac, and I operate with Windows so it wouldn't do anything unless I restored it and started over fresh. I tried to sync it but it gave me an error message (i cannot recall what it said- but i believe it was the same as i am getting now). It only synced about half my songs (I have over 3000 on Itunes and it only did about 1400). I tried to restore factory settings again and after it finished it showed all my songs on the ipod, but the error message still popped up. My songs play on my ipod just fine it shows all my songs and all my playlists. everything seems to be working fine but the message still returns. I plug in my Ipod to sync and instead of showing the screen where it tells you about firmware and updates etc that I always got with my other ipod it, the 'welcome to your new ipod' screen like it did after I restored it.
    Can anyone help me fix this problem???? or am I royally screwed and need to throw in the towel?
    Just to specify so there's no confusion:
    Ipod in question- Classic Gen7 160gb
    Ipod software version- 2.0.4 (as of 3/2/15)
    Itunes version- 12.0.1.26
    OS- Windows 7 64bit
    if there is any other information needed please let me know (and an idea of how to find it.)
    Im afraid to sync my Gen6 or other ipods (2 gen4 shuffles that are for my kids) for fear of something similar happening to them.

    This error can also come from WireTap Pro or possibly Snapz Pro ! Look in your personal library itunes plug ins folder for anything called iToner - I found it in there and promptly removed it and now its working again... I never bought iToner but apparently Ambrosia software puts a supplement file in there so look around for it if you have any Ambrosia software products on your system you maybe need to hunt this little monster down.....
    Needless to say I will never trust itunes plug in again from anyone.....

  • Ipod classic errors with vista

    Hi,
    I have an ipod classic 160GB and am running windows vista. I had the ipod for around 8 months and had no problems. When recently trying to sync I received an -50 error. I tried to sync again and got error -69. I did the 5 r's. Yet I have got the same results. All the help and support I could find on these errors was for windows xp.
    I appreciate any help.
    thanks.

    Pleeeaassse help

  • IPod Classic [Error 1439] - iPod won't restore

    My iPod Classic was working fine until yesterday when I plugged it in to update my iTunes library.  iTunes said the iPod was corrupted and I must restore it and lose all data loaded onto it. That seemed bad enough, but then the restore failed and I got this message about Error 1439. I looked this up and it was on a page with lots of other error codes, I tried all the steps recommended and it has got me nowhere. So now I've got an iPod that when it is unplugged says it has zero songs on it but in terms of the space available it says it is full.  When I plug it in it isn't recognised in My Computer and iTunes only recognises it initially when I plug it in with the restore screen I've already mentioned that features the restore button that leads straight back to the Error 1439 message - after that the iPod disappears from iTunes completely and you can't even eject it because there is no recognition that it is plugged in at all. Following the steps recommended in the iPod Classic troubleshooter / wizard didn't help, so now I just don't know what to do. Both the iPod and iTunes are updated to the most recent version, so has anyone got any useful advice? - The fact the Error 1439 message has already appeared on one of Apple's help pages along with other possible error messages suggests to me this must have happened to someone else before.  I can't call Apple's helpline isn't an option as I bought the iPod new in 2010 and apparently that means I'm not entitled to any help from them. So I need some help here please, but if all you can suggest is to post me back to the page about this in Apple Support please don't bother, I've already been there and the advice given doesn't work. Thanks and I look forward to reading your suggestions.

    Hey chjesc,
    I have an article for you that addresses this error code and may be able to provide you with some further information regarding this issue:
    iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    http://support.apple.com/kb/ts1372
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • TS1372 cannot restore my ipod classic error code 1429

    Hi there,
    my ipod classic cannot be recognice in itunes and when i try to restore i get error code 1429...any suggestions?

    I had error 1439.  I had to view the ipod in my computer, right click, select format.  This wipes the ipod, but so does a restore through itunes.  When i opened itunes again it said welcome to your new ipod and let me sync again

  • TS1372 iPod classic error code 1413

    I have an iPod classic it was recently restored in apple in Reading on a Macintosh computer. When we got home i tried connecting  it to my Microsoft laptop and it came up with error code 1413 and still wont restore what should I do?

    Try removing and Plug-ins you have installed with iTunes.  See here for more information.
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    Otherwise, try to reformat the iPod's Hard Disk using the instructions in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    More often that not, this particular error message can be a good indication that your iPod's HD is going bad or faulty.
    If possible, try another USB cable and port as well as restoring it again on another PC.
    B-rock

  • Ipod Classic - Error 1430 when trying to restore

    Hi, I recently plugged my iPod Classic 160GB into a hotel room alarm clock dock and when I returned from my trip iTunes is telling my I need to restore my iPod, when I try to do so I get the error message 1430.
    I went through the help page found here http:/http://support.apple.com/kb/ts1372?viewlocale=en_US but still cannot find a solution.
    Here are the Disk Stats:
    Retracts: 12
    Reallocs: 432
    Pending Sectors: 40
    PowerOn Hours: 13
    Start/Stops: 1062
    Temp: Current 28
    Temp: Min 9
    Temp: Max 47
    Am I royally screwed? I've hardly used this iPod, need help, thanks, you guys are great.
    Cheers
    SOL

    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • ITunes won't sync my iPod Classic? Unknown error occured [-1303]

    This is actually the first time I have gotten this message, earlier today I was getting one the effect of "The specified disc cannot be read from or written to". I have tried "restoring" my iPod, but that didn't work and now I can't get all of my music back onto the iPod. I would love you forever if you will help me! <33
    THANK YOU!!

    Click here and follow the instructions.
    (65882)

  • Can't restore iPod Classic - Error 1439

    I tried plugging in my iPod one day to put new songs on my iPod, but it was freezing my computer and I had to restart my computer. When I restarted my computer, suddenly my iPod was reading 'Plug to computer to restore'. Which is strange itself, because my iPod was fine prior to me plugging it in to the computer. So that's what I did, but my iTunes was having trouble restoring my iPod, and it wouldn't work. So I decided to try it on my laptop (I have iTunes on it too), but now I'm getting the 'Cannot restore, error 1439'. I've tried unplugging and replugging. I've tried rebooting computer. I've tried it on different computers. I've tried changing the port. I've updated iTunes to iTunes 9. I've tried every resolution that iTunes gave in support. Nothing seems to work.
    Does anyone have any idea what I can do to get it to restore? If not, anyone know another way I can restore my iPod without iTunes use?
    PS. I have a Windows XP

    Here's the Apple Support doc for that error:
    http://support.apple.com/kb/ts1372
    Which at a guess suggests it a communnication issue. I'm pretty sure there will be a new build of iTunes out on Monday which might help if the problems originate with the particular build of iTunes (although it works fine for me). It would be worth trying to check out your device on a friend's computer who is not having problems to try to exclude either the iPod, the cable, or the PC as the most likely source of trouble.
    *iPod Diagnostics*
    You might also want to run some diagnostics on the iPod just to make sure the problems don't originate there. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    tt2

  • TS1372 ipod classic error 1439

    Will not restore to factory setting and ereased everything.  What can i do to fix the problem?  Thanks.

    Do the iPod Disk Diagnostic first, as post bt tt2, to see the health of your iPod Hardisk.
    Then read this Apple Support Article on error 1439, if your iPod Hardisk is in good shape.

  • Ipod classic error 1439

    how can i fix this? attempted putting ipod in disk mode and recovering to no avail. what else can i do?

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • TS1372 ipod classic won't restore

    can't restore ipod classic error 1439

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Maybe you are looking for

  • Settings: how do i tell Firefox 4 to start up with a fresh page in stead of one from cache?

    When i start up firefox the system automatically starts up with the last page in cache in stead of downloading a new one from the site on my startpage.

  • Order blocked for delivery as a result of credit check

    Hell SAP Experts, A Order is blocked for delivery as a result of credit check. I have RELEASED it through the TCode- VKM3. But still the Order's over all credit status is 'B'   (Credit check was executed ,document NOT OK). I have checked if the Custo

  • Dashcode quits at the startup, Incompatible library version

    Hi all, I'm on Snow Leopard (10.6.8) and I have a problem with Dashcode. It quits at the startup because: Dyld Error Message:   Library not loaded: /usr/lib/libcurl.4.dylib   Referenced from: /Applications/Utilities/Dashcode.app/Contents/MacOS/../Fra

  • Using an iMac with Premiere?

    I'm thinking of getting an iMac to work with CS6 to do some light editing, I work in design but I am not a dedicated editor. Curious to hear from any iMac users what they think of editing in CS6 on an iMac, and and suggestions they may have? I plan t

  • No button in 11g?

    Hi, In reports 6i , we could add buttons to the report (in the layout editor).... Is this not possible in Reports 11g Thanks. N.