Ipod classic having trouble to connect my car USB

I use to connect everyday in my new camry 2012 but recently it is not connecting through USB . when i plugin into USB it just shows charging . when i connected to my laptop its works fine.
i checked with my wife iPhone , it is working fine in my car with USB.

Reset the iPod and connect it back to the Car Audio.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Connect to the Audio System.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good luck!

Similar Messages

  • IPod classic having trouble to eject.

    I plugged my iPod classic into my mac and it finished syncin my music and i clicked eject, but it wont work and says it contains files that are in use by another application, someone help please!

    If song files are being used by another application, then it is possible to see that message.
    Are you, or were you, modifying songs in another programme such as Garageband or Audacity? On a Windows PC, anti-virus software checking the music files can cause this issue, but I don't know how this works on a Mac.
    In the end, you should be able to turn off the computer and once turned off, you simply disconnect the iPod from the computer, because at that time, no prgrammes are using the iPod , including iTunes.

  • Ipod Classic will no longer connect to car deck's usb

    I updated my ipod in itunes and now my car's usb deck will not recognize the ipod. It had been working for years without a problem. I emailed kenwood and they said apple pushed out an update that is causing compatibility issues with car decks. They suggested a "soft reset" which did nothing. Kenwood told me to contact Apple and Apple wants me to pay for support. Guess I'll surf around this forum till I find a way to revert back to an older version of the ipod software.
    Here's the thread from kenwood:
    Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
    I understand you are having an issue with playing back your Ipod. If you recently updated your Ipod to the newer iOS4 software version we recommend attempting to soft reset the Ipod and attempt reconnecting to your head unit. The available updates from Apple have caused some issues with connectivity. For information on resetting your Ipod we recommend visiting www.apple.com.
    Please feel free to contact us again with any additional questions.
    Steve
    Product Support Representative
    Kenwood USA Corporation
    Area: Car & Home
    Topic: Troubleshooting
    First Name: andrew
    Last Name: lapteff
    Email: [email protected]
    Product Model: KDC-MP342U
    Zip/Postal Code: 19128
    Subject: Ipod won't play via usb
    Body: After working perfectly for years, my Ipod will not play on my KDC-MP342U for the last 2 weeks. The KDC-MP342U just flashes, "reading" but never syncs. I tried resetting and restoring my Ipod, but I still can't get it to work on my deck.
    Any help would be greatly appreciated,
    Andy Lapteff:)

    Read this Apple Support Article on Restoring iPod.
    It is on step 6.
    Restore would reformat your iPod Hardisk, if it is still in good condition, but some iPod Hardisk may be damage, due to abuse and misuse, so the Restore would fail.
    For a successful Restore, I would also suggest that
    Disconnect all other USB devices
    Use the USB2.0 port
    Do not use any USB Hub.

  • How do I connect my Ipod classic to my alpine TDM-7582 car stereo?

    How do I connect my iPod Classic to my alpine TDM-7582 car stereo?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • My ipod classic 160GB won't connect to my car

    Hi, my IPod classic 160gb will not let my car access tunes & play them.   It's not the lead because a friends works fine.   and my software says it's up to date can anyone help - I miss my music .
    Thank you.

    HI there,
    Snow Leopard is going to be a paid update that you will need to order form the Apple Online Store. Before upgrading, it is always a good idea to have a backup of your information. The article below has more information about backing up.
    Mac OS X v10.5, v10.6: How to back up and restore your files
    http://support.apple.com/kb/ht1553
    -Griff W

  • Having trouble staying connected to IEEE 802.1X with my iPhone 4s

    I got my iPhone 4S pre-ordered with Verizon and I am having trouble staying connected to my college's 802.1x WiFi connection. My college has a help website with a walkthrough to connect to the network and it works and I can get WiFi on my phone but when I lock my phone for about 1 minute my phone forgets the connection and I have to go through the steps all over again to get connected.
    Here are the steps my school site has me follow:
    Connecting to the RPI Wireless Network Using 802.1x Authentication on the iPhone / iPod Touch
    Make sure that your device has been updated to the latest software version available.
    Go into Settings and select Wi-Fi.
    Make sure the Wi-Fi switch is set to ON.
    Under Choose a Network, select Other....
    Enter rpi_802.1x for the Network Name, and press the Security option.
    Select WPA2 Enterprise as the security, then press the Other Network button in the top-left corner to return to the previous screen.
    Enter your RCS userID and password in the appropriate fields and press the blue Join button in the bottom-right.
    Let the network access load, then press the Accept button to accept the certificate provided.
    This is really annoying so any help would be appreciated.

    We use 802.1x Authentication here at UCSD and it seems fine.
    The only problem i see is it will disconnect when you lock the phone but it automatically reconnects when you unlock the phone.
    Our setup is a lot simpler, you just select the network and enter in your AD account information.
    It could be your college has not setup their wifi correctly. You should connect your network team.
    http://blink.ucsd.edu/technology/network/connections/wireless/iphone4.html

  • HT1848 I rented a movie on my ipod touch and want to watch it on my computer because my ipod is having trouble downloading over wifi. How do you find your rental purchases to download on a computer?

    I rented a movie on my ipod touch and want to watch it on my computer because my ipod is having trouble downloading over wifi. How do you find your rental purchases to download on a computer?

    You cannot.
    iTunes Store: Movie rental frequently asked questions (FAQ)
    If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer."

  • A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! Nothing seems to work! HELP! :/

    A few days ago i small piece of plastic got stuck and subsequently fell out the charger hole of my ipod classic, although it still connects to itunes and syncs itunes says it has synced but there is nothing on my ipod! I have done this a few times and nothing seems to work! HELP! :/

    Transfer all of your content to the computer:
    Tunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    http://support.apple.com/kb/HT1848
    Then try turning the device off and on again. I'd leave it off for 10-15 minutes, but that is up to you:
    http://support.apple.com/kb/HT1430
    If the item is still there, you may need to restore the device:
    http://support.apple.com/kb/HT1414
    Hope that helps . Worst case scenario, you may need to write into iTunes support to see if they can also help!!

  • Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

    I'm unable to access content on my iPod Classic while it is connected to iTunes.
    The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
    I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!! 
    I just downloaded the iTunes program.
    Very confused, pleaseee help ...

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • I'm having trouble staying connected to the internet

    I'm having trouble "staying" connected to the internet.

    hmmmmmmm..........
    How are you connected to "the internet?"  There are many ways & you provided none.
    If wireless, are you using one of Apple's routers, or a 3rd part one?  If the latter post in their forums or contact their tech support department.
    Last but not least: 
    Please detail all you have done to resolve your issue.  Need this information so that the users can avoid the "been there, done that" scenario type responses.  This is to avoid repeating the troubleshooting you may have already tried.  Thank you.

  • Having trouble opening connections and reading from Bluetooth devices.

    Hello,
    As the title states, I am having trouble opening connections and reading data from a Bluetooth device. We are using a PDA to communicate with LabVIEW. First, the Bluetooth Open Connection VI displays a timeout error half of the time. Second, when it does open, it does not read what the PDA is sending. Third, if it does allow an open connection, it will not do it a second time unless the devices are turned off.
    I also have another related question. I am using a Linksys Bluetooth USB adapter, and the driver is proprietary. Labview requires the use of a Microsoft driver, and we are having problems going back and forth between the drivers. What Bluetooth receiver would you suggest using? The reason I ask is the fact that you have Bluetooth examples of client VI's. Therefore, you must use a similar device. Thank you for your time.
    -Jon

    Hi Jon,
    I'm not sure what Bluetooth receivers were used to verify the functionality of the VIs. However, I still want to help you solve your issue. Please make sure that you are running the shipping examples and let me know what version of LabVIEW, what PC OS and what PDA OS you are using. Does the Microsoft driver work for your Bluetooth receiver if you uninstall the Linksys driver?
    With your answers I'll do my best to help you out.
    - Philip Courtois, Thinkbot Solutions

  • HT204204 Having trouble to connect with bluetooth

    Why i having trouble to connect with bluetooth woth other smartphone? I  have already try to connect with bluetooth beetwen my iphone 4 with iphone 6 ? While my iphone 4 have already upgrade to ios 8

    never mind. I fixed it. After uninstalling and then reinstalling iTunes all start to work. Thanks anyways

  • HT5569 on my wifi page  linksys what does the  Renew Lease  mean?   I'm having trouble staying connected to my home wifi, does this have anything to do with that?

    I'm having trouble staying connected to my home Wifi, it keeps going to 3G (I have never had this problem until today) When it is connected while I'm close to the router I click on the circled i after the linksys  & it goes to the IP adress stuff, down a little waysafter the DNS & sarch domains it says Renew Lease - should I click on that?

    DHCP is the system that dynamically assigns ip addresses from a pool of addresses.
    You get a lease for the ip addresses. After the lease is up, the ip addresses is released and put back in the pool.
    You get assigned another ip address.
    Renewing the lease releases the IP address and assigns you a new one.
    It will not cause any harm.

  • Having trouble with connectivity, no internet connection away from home

    Having trouble with connectivity, no internet connection away from home, can't check Facebook, weather, scores.......

    if you don't have a dataplan and rely on wifi for internet that is how it works
    if you do have a dataplan it sounds like it's not set up correctly in which case you should contact your carrier

  • HT1695 Since i upgraded to ios 6,  I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?

    Since i upgraded to ios 6,  I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?

    I sometimes experience the same issue. But not only in 6.1 but also in previous versions

Maybe you are looking for

  • How do i restore an iphone 3gs back to factory settings as a new phone

    help, ive got an iphone 3gs off my boss at work, ive got an orange paymonthly sim and i thought id unlocked to factory settings but this morning tis reverted back to an iphones sign with a usb cable picture, can anyone please help me at all

  • IPhone 2.0 doesn't work with my exchange server

    My tech support guys have been working on my iPhone for an entire day and couldn't get it to work with the server. They are telling me that the phone isn't compatible with the exchange server and it would require an entire overhaul of our server and

  • Why won't my nike and iPod app work anymore

    Why won't my Nike+iPod app work on my iPod touch anymore? I just get a red screen then it closes. Anyone have an idea why this happens. It work fine not to long ago but I went to use it today and it's not working.

  • Duplicate Clients displayed in MultiPoint manger

    I have several thin clients connected on a multiPoint server each client is configured with a user account and connected. open multiPoint manager and it show that the 6 of the clients are connected twice to the server but only 1 instance has a user a

  • My ipod is stuck in reboot mode.

    I turned off my ipod touch(3g and running 4.3.4) and tried turning it back on and its been stuck in the page with the apple icon for about an hour now. What do I do?