IPod Classic - Music stops after a few seconds

I have an iPod 160Gb. My problem started a few days ago. After listening to a few seconds the music stops (really stops!). I have to 'click' on play again and it runs for a few seconds more and stops once more.
I've already resetted the iPod three times and so far nothing changed.
I've tried listening to different songs, many of them I've uploaded into the iPod a long time ago and I know there were working before.
Thank you for all the suggestions and ideas.
David

I have the same problem. And, just as daluan clearly wrote, "I've tried listening to different songs, many of them I've uploaded into the iPod a long time ago and I know there were working before". So it's not a matter of partly downloaded tracks.
As far as I've understood, the problem might be the headphone jack. The iPod is designed to pause when the headphones are removed, so any bad connection in the jack will cause this kind of problem. I will now try to clean my jack and the headphone plug, to see if the problem disappears.

Similar Messages

  • I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and show the project on my TV than after 10 min. the music stops for a few seconds.

    I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and showing the project on my TV than: after 10 min. the music stops for a few seconds. On the screen of the DVD-player I can see that after the word 'play' the clock starts again with counting the time. I tried everything: * burning slow. * all programs stopped, except iDVD. * all other apparature uncoupled. Is this a problem of my iDVD-program or my LaCie burner?

    mishmumken is correct about the 99 slides.  There's an 99 chapter limit in each slideshow for DVDs and each photo is considered a chapter.  iDVD gets around that by renaming slide 100 back to 1 and goes on. 
    The pause can be minimized (but not eliminated) by burning to disk at the slowest speed available: usually 4x or 2x.  Save the project to disk (File ➙ Save to Disk menu option) and play the disk image with DVD player to check out the transition at 99 and 198.  Then burn the disk image to disk with Disk Utility at the slowest speed possible.  Also use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Photoshop CC 2014 stop after a few seconds

    I'm a CC subscriber and I recently updated my photoshop CC to photoshop CC 2014.
    I can start Photoshop but it automatically stops after a few seconds. I've already tried to uninstall / install multiple times without any success.
    When I read the file "amt3.log" in my temp dir, I can see "[ERROR] |  |  |  | AMT |  |  | 7188 | ERROR: Failure Validating Product License!".
    So it seems like a licensing issue.
    Did anyone faced this issue?
    Thanks for your help

    I have the exact same error on the log file. I even tried the "nuclear solution" with no more results...
    But as I tested the nuclear solution, I uninstalled Lightroom (which worked fine) and I've got the same issue, but I solved it by manually installing it (i.e without using the cc application) and it worked fine.
    The installer I used for ligthroom : https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom
    However, I can't get my hands on a similar installer for Photoshop CC.

  • NW_JAVA_700SP14_SR3 decompressing stops after a few seconds

    Hello, everybody,
    I downloaded NW_JAVA_700SP14_SR3 parts 1 to 3 sucessfully, but when decompressing NW_JAVA_700SP14_SR3.part1 it stops after a few seconds without an error message.
    When checking the archiv there is no error too.
    Has anybody an idea about this behavior.
    Thanks, Ruediger

    Hello Ruediger,
    which zip-tool do you use? Is it up-to-date?
    Is the size of the 3 files equal to the one in my screenshot? --> screenshot
    And last, do you have enough disk space? 
    Regards,
    Norman Schröder

  • TS1717 itunes song preview stops after a few seconds---solution?

    itunes song preview stops after a few seconds--need a solution??
    Thanks

    1. Use these DNS: Google and Verizon DNS
    Primary DNS = 8.8.8.8 Secondary DNS = 4.2.2.1
    2. Then apply these instructions:
    Windows XP
    On the Start menu, click Run.
    In the Open field type cmd and click OK.
    In the resulting window, type ipconfig /flushdns and press Return(Enter) on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    Windows Vista and Windows 7
    On the Start menu, point to All Programs > Accessories and then right-click Command Prompt and choose Run as Administrator from the shortcut menu. If Windows needs your permission to continue, click Continue.
    In the resulting window, type ipconfig /flushdns and press Return(Enter) on the keyboard.
    You should see a message that the DNS Resolver Cache has been successfully flushed.
    Your problem should be 100% solved

  • Sound from videos stops after a few seconds on Quicktime

    I bought a new Samsung camera and took some videos at a concert. When I put the videos on my MacBook Pro and try to play them on Quicktime, the sound stops after a few seconds. When I try to play them on iMovie or use them in iMovie, not only is there no sound after a few seconds but the sound that is there is sped up.
    The audio works fine in VLC but doesn't seem to work with anything else on my Mac. I've tried Perian, Flip4Mac...
    Codecs: H.264, AAC
    Help?

    I've seen this issue in the past.  I think it is connected to the operating system itself.  I say this because I reinstalled the os using itunes and then restored a backup.  Then garageband started behaving again.  Then the issue came back - after I did an os update.  So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
    Hope it helps
    @zorin

  • Oracle Names server stops after a few seconds

    Hi all,
    Working as a Server admin and DBA installed Oracle report server. They came to me saying the Oracle Names Server stops after a few seconds.
    There are 2 windows 2003 R2 32 bit servers, active passive config. The first server runs the service fine, this second server has the issue. Both servers were build the same..very strange that one would work and the other now.
    Hereis the Event viewer log for the service failure.
    Event Type:     Error
    Event Source:     Application Error
    Event Category:     (100)
    Event ID:     1000
    Date:          6/22/2011
    Time:          11:08:14 AM
    User:          N/A
    Computer:     USSCNBOSCRPT02
    Description:
    Faulting application NAMES.EXE, version 0.0.0.0, faulting module msvcrt.dll, version 7.0.3790.3959, fault address 0x00031a02.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74 Applicat
    0008: 69 6f 6e 20 46 61 69 6c ion Fail
    0010: 75 72 65 20 20 4e 41 4d ure NAM
    0018: 45 53 2e 45 58 45 20 30 ES.EXE 0
    0020: 2e 30 2e 30 2e 30 20 69 .0.0.0 i
    0028: 6e 20 6d 73 76 63 72 74 n msvcrt
    0030: 2e 64 6c 6c 20 37 2e 30 .dll 7.0
    0038: 2e 33 37 39 30 2e 33 39 .3790.39
    0040: 35 39 20 61 74 20 6f 66 59 at of
    0048: 66 73 65 74 20 30 30 30 fset 000
    0050: 33 31 61 30 32 31a02
    Googled the erro but nothing simular came up.
    Any ideas?
    Thanks,
    Mike

    HEre are the logs from the Names.log
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:03:06
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_5224.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1575))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00265: warning: cannot load data from checkpoint file
    NL-00905: error opening D:\Oracle\ora92\network\names\ckptop.ora
    SNL-00016: snlfohd: error opening file
    32-bit Windows Error: 2: No such file or directory
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00265: warning: cannot load data from checkpoint file
    NL-00905: error opening D:\Oracle\ora92\network\names\ckpdom.ora
    SNL-00016: snlfohd: error opening file
    32-bit Windows Error: 2: No such file or directory
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:07:16
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_2376.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00116: warning: data type "tos.npd.omd" in topology load
    NNO-00116: warning: data type "host.nm.omd" in topology load
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:09:24
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_3500.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00116: warning: data type "tos.npd.omd" in topology load
    NNO-00116: warning: data type "host.nm.omd" in topology load
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:10:37
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_1888.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00116: warning: data type "tos.npd.omd" in topology load
    NNO-00116: warning: data type "host.nm.omd" in topology load
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 20-JUN-2011 16:27:33
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_2564.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00116: warning: data type "tos.npd.omd" in topology load
    NNO-00116: warning: data type "host.nm.omd" in topology load
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 21-JUN-2011 11:33:35
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_1564.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00116: warning: data type "tos.npd.omd" in topology load
    NNO-00116: warning: data type "host.nm.omd" in topology load
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 21-JUN-2011 13:38:28
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_2552.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00116: warning: data type "tos.npd.omd" in topology load
    NNO-00116: warning: data type "host.nm.omd" in topology load
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"
    Oracle Names for 32-bit Windows: Version 9.2.0.6.0 - Production on 22-JUN-2011 11:08:13
    Copyright (c) 1993, 2002 Oracle Corporation. All rights reserved.
    System parameter file is D:\Oracle\ora92\network\admin\names.ora
    Log messages written to D:\Oracle\ora92\network\log\names.log
    Trace information written to D:\Oracle\ora92\network\trace\names_4800.trc
    Trace level is currently 0
    NNO-00268: warning: configuration database is not used, using checkpoint data instead
    NNO-00315: server is listening on address (ADDRESS=(PROTOCOL=TCP)(HOST=usscnboscrpt02)(PORT=1576))
    NNO-00060: loading server topology from checkpoint file "D:\Oracle\ora92\network\names\ckptop.ora"
    NNO-00116: warning: data type "tos.npd.omd" in topology load
    NNO-00116: warning: data type "host.nm.omd" in topology load
    NNO-00064: loading domain data from checkpoint file "D:\Oracle\ora92\network\names\ckpdom.ora"
    NNO-00065: loading cached data from checkpoint file "D:\Oracle\ora92\network\names\ckpcch.ora"

  • On my ipad video streaming stops after a few seconds only sound is playing .what could be the reason.

    on my ipad 2 video streaming stops after a few seconds, only sound is playing .what could be the reason and how to solve this problem.
    I have a feeling that it may have started after upgrading to ios6.

    Hi,
    Is this failing with Error 20 ?
    Sometimes in a the router or modem if you use Port Forwarding then you are your Buddy may be missing the Screen Sharing Port.
    The Screen Sharing part uses a different port to the Audio port.
    As the port for Audio (And therefore Video) are known and can be port Forwarded it is the random Screen Sharing port that can be the problem.
    iChat 3 info http://support.apple.com/kb/HT1507 that includes Bonjour and Jabber info
    iChat 4 info http://support.apple.com/kb/HT2282
    If you are not using (or your Buddy) UPnP then I would change the method of opening the port to that.
    6:14 PM Saturday; June 20, 2009

  • HT1386 As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks

    As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks

    Hi Patrick,
    Yes, a very frusterating issue indeed. Someone else had mentioned a possible issue with real player, I tried getting rid of that and same issues. I even got completely rid of firefox for the moment. Guess what, problem still is persisting. I think this means it maybe something else altogether. I will go back to re-add firefox after I get this straightened out but now using Chrome for the moment.
    What I've also found out is that the sound can be restarted when I unplug and replug in the 3.5mm speaker cable from the audio output jack on the back of the computer. Any ideas?
    Thanks!

  • My MacBook will not play videos. No sound and the video stops after a few seconds.

    My Mac book pro will not play videos. No sound and the video stops after a few seconds.

    Hello GrahamBIOM,
    I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
    Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
    Please respond back at your earliest convenience with results.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • My bootcamp download stops after a few seconds. it takes forever but does not move. Could someone help?

    my bootcamp download stops after a few seconds. it takes forever but does not move. Could someone help?

    For Windows Support Software: the download size is around 600MB - 1GB. Depends on your Mac Model. There are server problems but a good idea is to check from iStat menu's or something else if there is some activity.
    Also, make sure that in your network settings:
    Uncheck Automatic Proxy Detection
    Uncheck Passive FTP Mode

  • Audio recording stops after a few seconds on iPad 1. Any suggestions?, Audio recording stops after a few seconds on iPad 1. Any suggestions?

    On an IPad 1 even after a full restart, and only application running, I'm finding that Audio recoding stops after a few seconds. The duration seems to be fairly random between 5 seconds to 25 seconds. Creating other tracks seems OK.
    Any ideas would be appreciated.

    I've seen this issue in the past.  I think it is connected to the operating system itself.  I say this because I reinstalled the os using itunes and then restored a backup.  Then garageband started behaving again.  Then the issue came back - after I did an os update.  So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
    Hope it helps
    @zorin

  • My ipad stops after a few seconds, says slide to power off/cancel.  What is the problem?

    What could be wrong with my ipad?  it stops after a few seconds with "slide to power off" noted. 

    Settings are OK, but the internal power supply is on the verge of failure. Soon, you will not be able to turn the Time Capsule on at all after it turns off.
    Take the Time Capsule to an Apple Store....if you have one near you....to discuss your options.
    Otherwise, contact Apple Support.
    http://support.apple.com/kb/HE57

  • Sound stops after a few seconds

    I have a HP G61, Product Code VY441EA#ABU. OS is Windows 7 Home Premium 64-bit. Audio stops after a few seconds. This happens on TV i-players, BBC News website clips, football streaming sites, even the HP Support site's tutorials. I have done a System Restore to a point when I know this was not a problem.  I have downloaded the audio driver for my laptop from the HP site. I have tried the MS audio troubleshoot fix, which found no problems. I would sure be grateful for any other ideas to try!

    Hello GrahamBIOM,
    I understand while viewing a video or listening to some different content, you lose audio, is that correct? I will do all I can to assist you with this issue.
    Does the issue occur when you have headphones inserted? If you are not sure, if you have a set of headphones available could you test that please?
    Please respond back at your earliest convenience with results.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • HT1923 preview song stops after a few seconds

    the preview song stops after a few seconds, any ideas on how to correct?

    Perhaps try resetting your iTunes Store Cache.
    Go "Edit > Preferences". In the Advanced tab, click the "Reset cache" button shown in the following screenshot:
    ... and then click OK.
    Restart your iTunes, and head back to the Store. Are you getting full previews now?
    (Doesn't work for everyone, but does no harm to check.)

Maybe you are looking for

  • Delete a .txt from usr/sap/tmp directory

    Hello, Does anyone knows how to delete a file from the following SAP directory? /USR/SAP/TMP/file.txt Thanks in advance, CL

  • Problem with JTree editing icons

    Hello, I want to edit another icons than the default icons in JTree object. I look in the javadoc at the several methods, but I do not find a method witch can give me the possibility to setup the collapsed and expanded icon. If some one now how to do

  • No longer recognises my speaker dock?

    Since updating my ipad 2 it now no longer recognises my speaker dock which it has been working perfectly with for the past 12mths? How do I fix it?

  • How Can I replace line in text file

    I have a text file like following format 1 bvhhk g1 2 bvgjvh g1 3 mmm,mvb g2 I want to replace 2 nd line to " prasad" and after replacing it should be following format 1 prasad g1 2 bvgjvh g1 3 mmm,mvb g2 I try above change using following code segme

  • I have a problem with Time...

    Hi... my problem is that I need to compare two Times, but I don't know wath is wrong in my code... I read a Time from a String, I convert that String in Date, and I transfor this Date in Time, to compare with another Time... but It don't work... My c