Ipod classic no sound from headphones

My Ipod classic has no sound from the headphones?

Hey carnabylane,
Thanks for the question. To isolate the issue further, does it persist with a different set of headphones? If so, lets complete some troubleshooting with your iPod:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks,
Matt M.

Similar Messages

  • Ipod classic - no sound from headphones or dock

    Hi,
    I have an ipod classic and it has stopped outputting audio on both the headphone socket and the dock socket.  Any ideas how I can sort this out?  Or is it just dead?
    Thanks

    Thanks for your reply
    Do you mean take it to a physical store?  The closest one I have is just over an hours drive away, if they'll look at it for me though I guess it's worth it.
    Thanks

  • HT1459 my  4th generation ipod only has sound with headphones

    my 4th generation ipod only has sound with headphones how can i fix this problem

    - Try inserting/removing the headphone plug at least a dozen time.
    - Cleanout/blowout the headphone jack
    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem that indicates a hardware problem. Likely the headphone jack is bad.

  • Low and unclear sound from headphone HP Pavilion G6 2228tu

    laptop hp pavillion g6 2228TU  OS windows 8 pro 64 bit
    every thing was working fine.. but from last 2-3 days i faced a problem of low and cracking sound from headphone ..
    laptop speraker are working fine .. but when I connect headphone to audio port .. sounds comes out to be very low and unclear.
    I tried headphone with my desktop and mobile but it was working fine.
    I called HP custmor support.. they gave a link of sound driver.. i updated sound driver but no solution comes out..

    Hello Deepak-Kumar,
    You’re having a problem with the sound not be very loud.
    Go to device manager and uninstall the IDT audio.
    Do not restart the computer.
    Now install the updated sound driver.
    Since it has not been to long since the problem started, you can run a system restore.
    This will take the system back to when everything was working correctly without affecting your personal files.
    Here is a link on how to do a restore.
    Let me know how everything goes.
    Have a good day.

  • I bought an iPod classic in Japan from an apple store...

    I bought an iPod classic in Japan from an apple store. I still have the reciept but obviously it is in japanese. There are 3 or 4 dead pixels stuck on the iPod screen. If I take it back to an apple store in the UK could I have it fixed? The iPod is less than a year old.
    Thanks,
    TehTom

    If it was purchased less than 14 days ago, you can return it to the store for a full refund and buy a white one.  Otherwise, no, you can't exchange it.

  • My iPod classic was stolen from my car is there away to recover it

    My iPod Classic was stolen from my car is there away to use iTunes to recovery it ?

    The only way that you can track it, is if you had find my iPhone app on, and it needs to be connected to a wi-fi network.  You should change your iTunes password as soon as possible. 

  • No Sound From Headphone Jack, Only Internal Speakers working in Macbook Pro A1278

    Hello, the internal speakers of Macbook Pro A1278 OSX 10.7.5 are working perfectly, but no sound from headphones or external speakers when plugged in. Headphones/speakers recognized when plugged in, shown by System Preferences/Sound, and since the sound stops from internal speakers when headphones/speakers are plugged in. No red light seen coming from headphone jack, as I read in other posts. The problem began after a cable was connected between computer and stereo system. Maybe overloaded the sound card and burned out a connection? Wondering if you think that the sound card needs to be replaced or is there another solution possible? Thank you.

    Hello JohnBoarkman,
    Welcome to the Apple Support Communities!
    I understand that you hear no sound from your accessory when you connect to your headphone jack. My first troubleshooting suggestion for this situation would be resetting the NVRAM on your Mac. Please use the instructions in the attached article to complete this process and let me know if the issue continues. 
    How to Reset NVRAM on your Mac - Apple Support
    Have a great day,
    Joe

  • HT1363 why is my ipod classic ejecting itself from my laptop?

    why is my ipod classic ejecting itself from my laptop?

    Is Enable Disk Use ticked from under the iPod's Summary tab?  Does this happen when you plug the iPod into another available USB port?
    Are there any other USB devices that are plugged in? 
    B-rock

  • I just purchased a 120gb iPod classic 6th generation from a friend. I have the latest iTunes installed and the software on the iPod is also current. My problem is whenever I'm syncing the iPod and iTunes freezes between the 250- 300th song...

    I just purchased a 120gb iPod classic 6th generation from a friend. I have the latest iTunes installed and the software on the iPod is also current. My problem is whenever I'm syncing the iPod and iTunes freezes between the 250- 300th song... I have to manually reset the iPod for the iTunes to run correctly, but then my music isn't added and iTunes tells me I have to restore the iPod... I've done this numerous times only to no avail... Someone please help!!!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Ipod classic sudden sound distortion from dock connector only

    I have an ipod classic 160gb 7th generation.  When I docked it one day the sound was very distorted and unplayable.  This happens in different docking stations yet they play with other ipods.  I can still sync and charge (through some but not all chargers) and can play through headphones.   
    I have reset, restored, turned the EQ off and still no change.  Any help /advice?  not under warranty
    thx

    Thanks for your reply
    Do you mean take it to a physical store?  The closest one I have is just over an hours drive away, if they'll look at it for me though I guess it's worth it.
    Thanks

  • TS1382 IPOD Classic "clicking" sound - computer won't recognize it now

    IPOD Classic. Was transferring files from iTunes and started hearing a "clicking" sound from iPod. Tried to disconnect. Computer said safe to do so but iPod screen never said ok. iTunes and computer won't recognize it now.Is clicking a hard drive failure? Also when I try to turn it on all I get is the "go to apple support url". Can`t get to any menu screen.

    Thanks...it sounded like that from other things I read. Appreciate the response.

  • IPod Classic 160GB Sound Quality Questions

    My question relates to this older thread found here http://discussions.apple.com/thread.jspa?threadID=1126861
    Basically, it's that the new iPod Classics have inferior sound quality compared to older models because of the new Cirrus DAC, with reports of it sounding too bright/fatiguing/metallic/too much treble.
    I love warm and laid back sound, so this concerns me and is the only thing stopping me from purchasing one. However, I am going to mainly use it in my car hooked up to a Pioneer P6100BT through USB which bypasses the iPod's DAC and uses the Pioneer one. Since I won't be using the iPod's DAC, will these sound issues not apply to me?
    Thanks in advance!

    The Apple Discussions thread begins in September 2007 - old 160GB iPod Classic.
    This long thread suggests that the latest 160GB model has improved sound quality.
    http://www.head-fi.org/forums/f15/7th-gen-2009-ipod-classic-160-sq-448992/
    Richard

  • IPod Classic Randomly Disconnects from Car Stereo

    I have a 160GB iPod Classic that is hooked up to my car stereo. Previously it was connected to a 2012 Kia Sorento SX and it would just randomly disconnect from the stereo and freeze. The only way to get it back was to do a hard reset (menu/select button held down), then start playing a song, and then connecting to the stereo. It didn't happen frequently, but maybe once or twice a month.  Annoying.  But I thought it had to do with the way Kia implemented the connection to the iPpd.
    I just recently acquired a 2014 Acura MDX and I've already had that same annoying problem twice in 2 days. So now I'm starting to think maybe it's the iPod.
    In the past, I've done a full restore, repaired the drive, etc. Nothing seemed to help.
    Any ideas?  Thanks!!

    Sometimes this works. Otherwise you will have to wait for an updte to the car system or the iOS on the iPod
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the car system
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
      - Restore to factory settings/new iOS device.

  • Audigy 2 plat- cannot get sound from headphone output, only from rear pa

    I hjave installed the card but have not been able to get output from the headphone jack omn front panel. everything else works fine.

    Inertia22 wrote:
    I put in the Audigy 2 zs from my old PC into my new one and I cant get any sound from the Headphones or Mic.
    Only sound from the external speakers. Any help would be greatly appreciated.
    If you getting sound from the external speakers....are we talking the ones on the laptop?
    Means you still have the onboard sound turned on at a guess.

  • IPod classic poor sound quality

    Hi,
    I have a three year old iPod classic, and have noticed over the last month an issue with the sound. The sound quality is extremely poor and static sounding, like an am radio station whenever I use ANY setting on the equalizer. When the equalizer is set to off, the sound is normal again. This happens both with earphones and a dock with speakers.
    Can anyone help?
    Thanks in advance!

    Hi,
    I have a three year old iPod classic, and have noticed over the last month an issue with the sound. The sound quality is extremely poor and static sounding, like an am radio station whenever I use ANY setting on the equalizer. When the equalizer is set to off, the sound is normal again. This happens both with earphones and a dock with speakers.
    Can anyone help?
    Thanks in advance!

Maybe you are looking for

  • How do I get back my apps after getting ios7?

    I jay got iOS 7 but after downloading it, the majority of my purchased apps vanished from my screen. I can still get them, but I have to go to the App Store and open it from there. Is this supposed to happen? Or is there a way to get them back on the

  • Scanner  to iMac?

    I just bought a Mac and wonder how to connect it to my scanner. It's a HEWLETT PACKARD ScanJet 3300C. In the Mac I see you can install/connect Printer and Fax, but what about a scanner? Someone told me to just plug in the cord. I have, but how do I d

  • No Thumbnails In Show and Share

    I am running Cisco Show and Share 5.3 with a Wowza media server and am able to play videos fine, but the thumbnails are not showing up.  I can see the thumbnails in the draft but when I publish the video the thumbnails are not displayed.  I don't get

  • IDispatchMessageInspector.AfterReceiveRequest - bypass service call and return manually response

    Hi, I am using a service behavior class that implements IDispatchMessageInspector.AfterReceiveRequest to handle Health Check Service request that require skipping the actual operation's code and instead manually crafting a response message from "Befo

  • Illustrator CS3 printing problem

    When I print something on illustrator there is always blocks which have a brighter colour on the work and it doesn't seem to be random. I have an inkjet printer, has anyone got any ideas?