IPod Classic not charging or showing in coputer devices/iTunes

When I connect my iPod classic (120Gb) to my laptop it no longer shows under the computers devices.
The screen of the iPod shows "Charging. Please wait...". However, it does not charge. I have tried connecting the iPod to other computers to charge and with other USB connectors but there is still no difference. HELP!!

Hello Aideen,
And welcome to Apple Discussions!
So you have tried using a different USB cable as well as plugging the iPod into different USB ports on your computer? Have you tried resetting your iPod with it connected to your computer? To do this, toggle the hold switch on and off, then press and hold the Select (Center) and Menu buttons together until the Apple logo appears. Try more than once if need be.
Otherwise, have you considered uninstalling iTunes and all Apple software on your system and starting from scratch? Here are instructions if need be.
http://support.apple.com/kb/ht1925
What happens when you force the iPod into *Disk Mode* using the instruction in this Apple support document?
http://support.apple.com/kb/ht1363
Does it appear in "My Computer" at least as a mounted drive? If so, try reformatting it using the tools provided by windows?
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock

Similar Messages

  • IPod will not charge or show up in iTunes

    My iPod will not charge when I connect it to my computer through the USB cable. It does not show up on iTunes. Nothing comes up on the iPod screen at all. The iPod is completely dead. I have tried pressing the menu and center button at the same time. I have tried toggling the hold button. I have tried every combination. It is an old iPod (3 or 4 years at least) 80gb video. I have tried charging on another computer. It seems to only stop working like this if the battery dies completely.
    Is there another solution to this besides the menu/center button solution?
    Thanks!!

    This is the exact same problem I have. The only thing that works for me is to charge it on an old ihome alarm clock. I bought the alarm clock at the same time as the ipod, and I haven't tried it on a newer ihome device. Once my ipod is totally dead, thats the only thing that will work. I even took it to the apple store and they told me all they could do was give me 10% off a new ipod and "recycle" mine. Before you do that, I would really recommend trying to charge it on an ihome or similar device. Here is a link to the ihome I used to charge mine: http://www.uberreview.com/2005/06/ihome-ih5-ipod-alarm-clock.htm
    I hope this works for you!

  • 60gb ipod video not charging and PC saying "usb device not recognised"

    ipod will not charge at wall socket or through PC! PC saying USB device not recognised, ipod not showing in itunes or my computer. ipod had really low battery indicator and has now gone completely dead.

    I have the same problem. Have you found a solution?
    +Microsoft Windows XP Professional Service Pack 2 (Build 2600)+
    +Hewlett-Packard HP Compaq nx7400 (RU429ET#ABD)+
    +iTunes 7.3.2.6+
    +iPodService 7.3.2.6 is currently running.+
    +iTunesHelper 7.3.2.6 is currently running.+
    +Current user is an administrator.+
    +The current local date and time is 2007-08-28 15:09:27.+
    +Connected Storage Devices:+
    +Disk drive, FUJITSU MHV2120BH PL, Bus Type ATA, Bus Address [0,0]+
    +Universal Serial Bus Controllers:+
    +Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.+
    +Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.+
    +Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.+
    +Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.+
    +Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.+
    +IEEE 1394 Host Controllers:+
    +Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.+

  • IPod Classic not charging after sync

    When I plug my iPod Classic into my computer, it syncs up normally with iTunes, and the battery icon gives a "charging" indication. But when it finishes the sync and says "OK to disconnect", the icon stops showing the charging symbol, and the iPod stops charging itself. It only shows the charging icon for the few seconds while it's actually on the "Connected to iPod" screen and syncing up. The battery is now almost dead and I am at my wits' end. It only started doing this recently, I suspect due to some update or another. Help?

    I've just had the same problem and couldn't find any answers. You may have found this out by now but thankfully you can still charge the iPod at least...
    Open iTunes and click on preferences (either from the small box in top left, or under edit); click on devices; make sure "Prevent iPods, iPhones and iPads from syncing automatically" is ticked; Click OK.
    Now when you plug in your iPod the "Connected - Eject before disconnecting" screen should remain and it should charge. Then do any syncs after it's fully charged.

  • Ipod classic not charging

    Ipod classic is not charging

    Need more info to help.
    How old is your iPod?
    How are you charging it? using Wall charger or PC USB port?
    Normally it takes at least 2hours to charge it to 80% capacity and 4 hours to full capacity.

  • IPod Classic not syncing or showing up in iTunes

    My iPod Classic 160gb went on the fritz recently. It doesn't show any of the music and won't show up in iTunes when I plug it into my computer. I tried to reset it by hodlding down menu and select until seeing the Apple, but nothing changes. I then tried to go through disk mode, which I'm able to do on the iPod, but it still does not show up in iTunes. It does show up on my desktop though. I'm stumped. Any ideas???

    If it shows up in the Finder as an externally mounted drive, try doing a low level reformat of the iPod's hard disk.  This has corrected this same issue for a handful of other users recently.
    Use the instructions in this article to walk you through the process.
    http://www.methodshop.com/gadgets/ipodsupport/erase/
    B-rock

  • IPod does not charge nor shows up in Windows or iTunes

    I bought a iPod nano 2Gb two days ago. After some trouble shooting I got it to work and was able to get some music on the iPod. After using the iPod yesterday I wanted to recharge the battery.
    Since the computer was still on I reconnected the iPod the same it was connected when I synced it. This time however the iPod was not recognised by Windows or iTunes nor does it recharge.
    So far I've tried:
    - reset the iPod;
    - restart the computer;
    - reboot the USB drivers;
    - re-install iTunes;
    - restart iPod service on computer.
    So far nothing worked. Can anyone help me??

    Yesterday I tried to completly deplete the battery so now the iPod really doesn't do anything since it does not want to charge via the usb.
    Before depleting the battery I tried forcing the iPod in disk-mode and then connect it to the PC. Results, nothing happened when connecting the iPod...
    This evening I'll try the suggestion of adding usbstor.sys and usbsor.inf and restart the pc and see if that works. (link to that suggestion: http://discussions.apple.com/thread.jspa?threadID=785480&tstart=30)
    If that fails I think I'll just return the iPod and see if I can get my money back. It only worked once since I got it three days ago.....
    Still open to suggestions if anyone got some.
    Message was edited by: wilbertvn
    Message was edited by: wilbertvn

  • TA44551 ok my ipod classic wont charge it wont sync to my itunes but it will turn on when i plug it up sometimes it goes to a solid white screen that says ok to disconect and shows battery bar then it will not do anything unless i reset it or let it die

    Please HELP ME!!!!

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • IPod classic not recognized in iTunes and in Finder, doesn't charge

    iPod classic not recognized in iTunes and in Finder, doesn't charge and even doesn't charge outside of Macbook. I've tried rebooting Mac, rebooting iPod, I installed once again iTunes but nothing works Everything was fine until the latest iOS and iTunes update. Please help me :-)
    OS X Mavericks 10.9.5; iTunes 11.4

    Hello,
    The cord might be the case, but first, try these suggestions:
    Try putting your iPod into disk mode, then try connecting it to your computer again...
    <a href="How to put your iPod into disk mode</a>
    Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
    Have you checked this link out?:
    <a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
    Does your iPod appear in "My Computer"? If so...
    iPod shows up in Windows but not in iTunes
    If not...
    iPod missing in "My Computer" or in iTunes
    Post back on what happens when you try these things out. I hope this helps!
    ~~Kylene

  • Ipod classic not connecting (not even showing 'do not disconnect' on Ipod)

    Help! I have an ipod classic and, since I upgraded to itunes 9, I have noticed that, all of a sudden, my ipod won't connect at all.
    When I connect the USB cable to the ipod, the screen lights up but does not start charging nor does it show 'do not disconnect', and the ipod is obviously not recognised by Itunes. I have tested the same USB port on my printer with no problems, so it doesn't seem to be the port. I have also tried downgrading to itunes 8 with no problems. I have tested the cable and ipod on another computer and it worked fine. I am basically all out of ideas as to how to fix it.
    When I restart the computer with the ipod plugged in, the ipod briefly starts charging and shows 'do not disconnect' before disappearing after a few seconds. It is a total mystery to me.
    Does anyone have any ideas whatsoever? I am getting desperate!!!

    I have the same problem as you describe it. My iPod Classic 160GB freezes up when I plug the apple usb cable into the iPod. I am using Windows 7 64bit, and iTunes v9.0.2.25 64bit for Windows Vista & Windows 7. Firmware 2.0.3 PC. And I do not have this problem with my iPod Classic 80GB.
    This is the workaround to the problem: Reset your iPod. You need to hold down the center button and MENU button TOGETHER, and wait for the iPod to start resetting. Then release the buttons. When the Reset completes, it should start synchronizing normally.

  • My old ipod classic will charge but will no longer sync to my itunes.  My computer does not recoginze that it is plugged in.  Is it time to replace it?

    My old ipod classic will charge when I plug it it in but my computer will no longer recognize that it is plugged in and Itunes will not pop up.  Is it time to retire this 5 year old classic?

    Hello, a.higgins. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps in the article below that I would recommend going through. 
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Cheers,
    Jason H. 

  • Ipod classic not show up in windows or itunes

    why my ipod classic not show in itunes or windows

    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    BTW, this is the iPod touch forum I requested your posted be moved to the iPod Classic forum

  • I am not able to format my ipod classic as it is showing in the widows 7 but not in the itunes and when i try to format it, i am not able to format it

    i am not able to format my ipod classic as it is showing in the widows 7 but not in the itunes and when i try to format it, i am not able to format it i am not able to foramt it..

    Hello Ephremekka
    Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Regards,
    -Norm G.

  • My 3rd generation ipod is not charging, it keeps p showing the apple icon when charging???? help?

    my 3rd generation ipod is not charging, it keeps p showing the apple icon when charging???? help?

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My ipod will not charge or turn on or show any sign and its not jailbroken and i tried holding the home and power button and all that stuff but nothing works please helppppppp

    my ipod will not charge or turn on or show any sign and its not jailbroken and i tried holding the home and power button and all that stuff but nothing works please helppppppp

    Go through the steps here and see if anything works for you.
    iOS: Not responding or does not turn on - Apple Support
    You might have to bite the bullet and restore the device if nothing else works. If that doesn't bring it back to life, make an appointment at an Apple Store and let take a look at it.

Maybe you are looking for

  • Single and double quotes entered in form field cause corruption?

    I am creating a database change request system using in APEX 2.2 and the main form has a description field (clob) and a API_description field (varchar2(4000)) that are text area fields on the page. The form seems to have trouble when the string data

  • Fact Tables without Dimension Tables.

    Hi, I am currently working on a project where a data warehouse is being developed using an application database as the source. Since the application database is already normalised, the tables are being loaded in as they are and the consultant involve

  • The URL to call the screen of RFx directly

    Dear expart. I'm setteing at SRM7.0 in order to call RFx directly from SUS now. I would like to know what URL should be sat at URL of BIDDING_SERVICE in CustomerSetting of SUS. Should I set URL of EP there? Should I set URL of ITS as well as SRM5.0?

  • I am unable to download a pdf document onto my MAC from a Canadian government website

    I'm having trouble downloading a pdf document from a canadian govenrment website (I'm on MAC) in spite of having installed the latest version of Adobe reader.  Any ideas?

  • SM35 error, No authorization for FB05

    Hi Experts, User is trying run J3RFUM26 , Which creates job in sm35, Later they will run the job in foreground, job runs successfully for RUB, ZUSD & EUR but for ZEUR it says no authorization for FB05, Actually users not given access for this tcode,