Ipod classic not working after restart

What do i do if my ipod takes forever to sync and when it is ejected it doesn't have anything on it?? Anyone???, What do i do if my ipod takes forever to sync and when it is ejected it doesn't have anything on it?? Anyone???

If you are using a Macbook Pro, switch to the other USB port, as only one USB port is compatibly fast enough for iPod Syncing, the other is shared with other builtin devices like iSight, Bluetooth, hence slowing down the transfer rate and causing a timeout.
It would also help, if you disconnect all other USB devices while you are syncing an iPod classic.
Do the iPod Disk Diagnostic, it will help you troubleshoot, the cause of the iTunes Freezing,
refer to this excellent post by tt2
Look out for the high numbers, in Pending, Realloc and Temperatures.
Have a nice day!

Similar Messages

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

TS1363 ipod classic not working with win xp not sure how to sync it?

ipod classic not working with win xp not sure how to sync it?

Have you read this?
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
Switch 101: Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518

Changed Password Not working after restart[What to do]

Recently I've changed my password, but it's not working after restart.
I've noticed that, input option is not taking one of the password characters which is '!'.
I've the recovery disks, system accepts my fingerprint too.
Any help will be highly appreciated.
Thanks.

Hello,
Let me explain you what happened.
One evening I was trying to open my ThinkPad. Usually it asks for
fingerprint or password(I'm not sure which password, power-on/hard
drive). But this time I failed using my finger. and I tried with
password, but could not recall.
Then I restart and again tried with finger, this time it worked. Now
after login in Windows XP I removed all old fingerprints and create
few new. When I create new, it was asking for password, or new
password to replace. As I could not recall the pass, I've given new
password to replace.
Now to check I gave a restart. Fingerprint accepted for Power-on but
also asking for password again(Now I can see it's for Hard Drive). I
tried with new password. But it's not working. And even not taking one
character ('!') of the password.
Now can you tell me, if I did change password for Hard Drive in the
last description. Or is that possible to change it from Windows XP
environment. Else it's possible that the Hard Drive password remain as
it was which has been set from ThinkVantage before OS boot. Let me
know if you've any query which I've missed.
Thanks.

IPod (5G) and iPod (Classic) Not Working

_*iPod 5G:*_
I bought the iPod 5G 2-3years back ago. It was working all fine. Few months back I accidentally dropped the iPod. After this, the iPod was not working at all. None of the buttons works. But i am still able to put in on HOLD or even restart/put to disk mode. I am using it as a 80gb External Hard Drive.
*iPod Classic (120GB):*
I bought this iPod from Bangkok in December 2008. Later, in March, used to restart by itself and freeze suddenly when a track is being played. I had some tracks on it then. Whenever i try to play any track it showed the time 00:00 and started to play that particular track after this 'click' sort of sound from the inside, possibly from the hard drive. It even freezes during the RESTART process. So I had to bring it to a stable condition by restarting it during it is being restarted. My computer is not able to identify it. I have tried to restore it a couple of times now. Sometimes, I am able to get through the RESTORE process but most of the time my mac/ipod freeze together and wont come back to normal until and unless the usb wire is pulled out forcefully. Well, whenever iTunes recognizes it, I try to sync music. I have about 200 tracks in this one playlist. Whenever i try to sync it, the ipod freezes together with my mac. The sync process stops without copying all the tracks to my ipod. After that the screen goes black and then comes back with a dull APPLE logo displayed.
+Information on iPod Shuffle:+
My dad is going to Bangkok tomorrow. I asked him to get me a Shuffle. The new one that talks. I use the ipod mainly in my car (using the aux). There are no buttons on the Shuffle as everything in situated in cable of the ear phones. How am i going to use the controls if my connect the AUX (from my car's stereo) to my iPod? I wont be able to change tracks, pause or even shut down the ipod. Another thing is that whenever the ear phone plug is disconnected from the ipod, while it is playing a track, the track gets automatically paused.
This is very long, consumed a lot of time for you to read/for me to write. I guess making it longer would help me to kill time as I am running a ZERO OUT format on the 2nd ipod I own. :P
Thank You,
Samin
Message was edited by: samintasib

The classic bought in December 2008 would still be covered by warranty. Have you arranged for service for it?

IPod Classic not working in car but works everywhere else. Troubleshooting?

My iPod is not working with my Infiniti iPod jack but all other iPods work fine with the in-car system. My iPod synchs fine to my Mac and to an external stereo player through the connector on the bottom of the unit. So it looks like both units work fine with any iPod, but only my iPod will not work with the car while it does work with other connections. How can I troubleshoot this? Thanks for any help.
BTW, the Infniti is a 2008 G37 and the dealer just put a brand new unit in it and the same thing happened. The iPod is a 2008 80GB Classic.
Heeeelp!!!!

I have the same problem with my infiniti G37. Soo frustrating!

IPod touch not working after 5.0.1iOS update

It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

Have you tried the sandard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Retore from backup
- Restore to factory defaults/new iPod.

IPod is not working after being formatted and restored.

This isn't the first time this has happened to my iPod classic. In a span of about 5 months, I've visited the Genius Bar, and one has been replaced under warranty. Now, the newly replaced one has suffered the same things that the old iPod has experienced. One day, as I was syncing new music, iTunes suddenly froze and had to abort the sync, making me eject the iPod without the sync completing. So, iTunes deleted all of my data (music, photos, videos, etc.). Now, each time I plugged in my iPod following that, iTunes had always frozen, and did not let me access the Devices tab and restore my iPod. Then, having a PC, I formatted it to its default settings, seeing that my computer recognized the iPod and iTunes did not. A pop-up box came up saying if I wanted to fix the problem on the iPod, and I prompted to do so. It completed, and it said my iPod was fully functional. Soon after, it was recognized by iTunes again, and said that it had corrupted files and needed to be restored, seeing that the iPod was under the Devices tab once again. I did so, the restoration was completed, and iTunes said that once after the iPod restarted, it would appear once again under the Devices tab. But, however, it did not appear, after leaving it plugged in for about 5 minutes. iTunes froze again, and now the process begins all over again.
I have fully updated my iTunes, and I am using an HP Pavillion Notebook, under Windows 7.
I need help. I don't want to go back to make a reservation at the Genius Bar since the iPod is no longer under warranty, and perhaps I can fix it on my own. Will they be able to fix it under no charge? What should I do?

Also, if I eject it from the folder where all Devices are on my computer, the iPod restarts, and the restoration process on iTunes starts all over again.

Microphone does not work after restarting computer

I just received the Creative Xmod soundcard yesterday after using an Icemat siberia usb headset sound card for a couple months. The sound is a lot better with the creative soundcard however, if I restart my computer and go back into ventrilo, my microphone does not work. It doesnt make any sound when I talk into it (almost as if it muted itself) but it hasnt. I check my sound settings and everything is the way it should be.....but the mic isnt producing any sound. It is not my headphones that is causing the problem because I have never had this problem with my old icemat soundcard. I am currently using :
Sennheiser PC350 headset
Windows XP Home Edition
The newest version of Ventrilo

http://picsend.net/images/240403ventsetup.JPG
That is how I have ventrilo setup. A friend of mine said I should Mux set to Record Control, but it only gives me the option for Wave In =/

80GB Ipod classic Not working

well i have a 80 gb ipod classic and as soon as i plug into my computer it just decideds to freeze itunes and not let me click anything on itunes but allows me to still run everything else, also in my computer my ipod appears there but does not allow you to accsess it also, but also does not appear in itunes
any help/advise ??

I am having the EXACT same problem. All the buttons work fine on my 80gb iPod Classic, except for the play button.
I am experiencing the exact same thing as the poster. The play button will not work. I also have to unplug the headphones to pause the music and let it go to sleep when I am finished.

Mail on iPod Touch not working after iCloud password change

A few days ago, I was prompted to change the mail password for my iCloud account. My iPad and MacBook mail were both successfully updated and then accessed. When I tried my iPod, it said the password was incorrect. I delted the account and added it again, but the account is still not accessble.
After some research, I think my iPod is a second-generation model. It was purchased two years ago this month, so I was disappointed to see that it cannot be updated to iSO 5. Because I cannot have this upgrade, I cannot get the iCloud option in Settings which would help me out. I suspect this is the root of my mail problem.
Is there any way to get my mail to work?

Update: I just spent some time with an on-line chat. Turns out that when I switched to iCloud a few months ago, I missed an opportunity that started on May 1, 2012.
For those of you who have not yet made the switch to iCloud, the paragraph below might help. Please note that the Apple help said that I should use Firefox rather than Safari to access the site. Crazy! Why would an Apple Application not work.
What if I just want to keep using my email on all my devices?
As of May 1, you can choose to keep using your mail after MobileMe ends, even on devices that don’t meet the iCloud system requirements. Just go to me.com/move and select the option to keep using your email after MobileMe ends. Once you have completed this short process, your mail will continue to work on devices that don’t meet the iCloud requirements after MobileMe ends on June 30, 2012.

Ipod Classic Not Working Correctly, ect.

The Ipod was working at all . It was working perfectly fine . It's an Ipod Classic . It was being used by a friend , they clicked on a song to listen to is and it turned off . So I plugged it in thinking it had died . It would not register that the Ipod was plugged in . I've tried everything , plugging it into the computer , plugging it into an Ipod dock , turning it off then back on , nothing . All it does is show the apple very dimly , no lights , nothing . Just the apple just barely .

I have the same problem with my infiniti G37. Soo frustrating!

IPod touch not working after data erase

I have an iPod Touch 1st generation. Although it is old it always worked perfectly. It was until I put "erase all data" in the iPod settings when it stopped working. I'm not sure of what I did. I was expecting to erase only songs,apps, videos, photos, etc... but now I don't know if I erased some important software that makes the iPod work. The ipod always turn on when I charge it, but I only see the white apple and the sign that is loading. I'll be glad if you help me on this!

Sadly, I too am having problems here...I recieved apple error 2330 sometime after the Fall...I have been trying to sleuth and work my way around all this mumbo jumbo for months!
1) I cannot properly use iTunes for some reason
2) I erased the data in my ipod Touch (1st generation) manually via the iPod Touch, and right after I did this, it gave me the Apple logo with the slash and the spinning progress wheel that users above mentioned...
Please help us!

Dll soes not work after restart teststand

Hi NI Team,
I have an issue whereby i am using a 3rd part dll to program a device. At 1st it is able to program correctly using the designated dll. But after i've restart the teststand, it still able to point to the dll, but seems like the dll is not working as it should be. In order to make it work again, I need to change the dll path to another location in order to make it work.
I've attached the following
Sequence.jpg
- Shows the module configuration
return_result.jpg
- Shows the return result of a weird return as the suppose return result suppose to be "1" or "0"
Please do advice. Thanks
Attachments:
Sequence.JPG ‏190 KB
return_result.JPG ‏21 KB

Hi There - Thanks for the reply,
The problem i am facing is the dll that i am using does not work as it should after restart teststand, unless i change the path or point the dll to another new path. The error that i am getting is, the return result shows that it can't open the file path that that has been defined in the dll call path name parameter. The weird thing is, the dll able to work (able to point to the right image again ) after i point the dll to another path, meaning if i create a new folder then dump in the same dll inside the folder and point the dll to new folder it able to work. But i will see the same problem again after i restart teststand. In terms of unloading the dll, i have tried the run options to unload module either after step end or sequence end. But the problem still exists.....

Why will my 7th generation ipod classic not work in my 2006 VW Passat?

I equipped my vehicle with the VW iPod connector that was hardwired into my vehicle. I have used both a 1st Gen iPod video/classic as well as a 4th Gen iPod nano with no issues. However, the 7th gen iPod classic I recently purchased will not play music through my car's stereo system. It will charge, but is otherwise undetected by the vehicle.

Because it isn't designed to do that. The only Bluetooth profiles on the Nano are A2DP (Stereo Bluetooth) and low energy (think heart monitor). You cannot sync with it.

Ipod classic not working after restart

Similar Messages

Maybe you are looking for