Ipod classic only works when cold.

Does any body have experience with an ipod that only produces sound when cold, ie, coming out of the refigerator.   Also, will get sound when holding down the right lower corner?  I don't get sound from the ear phone jack or the docking station.  I have read extensive threads on another site regarding this.

There are probably some dry solder joints that work when pressure is applied in the right place and the device is cold. As it heats up different components expand at different rates and the circuit fails. I doubt it is amenable to an easy repair.
See also Corrupt iPod classic.
tt2

Similar Messages

  • After being dropped in water my Ipod will only work when hooked up to the computer or docking station.  It will not hold a charge.  What do I need to do?

    My son dropped his Ipod in some water, we put in a bag of rice overnight and it works fine when connected to the computer or docking statioon but it will not hold its charge once it is off the cable & not hooked up, so he cannot listen to it unhooked..  Any suggestions on what to do?  Thanks!!

    Take it to an Apple store. Most likely you will have to get a replacement for which you will be charged the replacement fee.
    Rice only absorbs water. But it cannot prevent damage to the device.

  • 160gb classic, only working when attached to mains power outlet

    In last 24 hrs my classic has decided to only switch on when plugged into mains outlet. Screen flickers when attached to laptop, had to restart computer to get it to switch on and sync. I have tried restoring to factorysettings before synching tunes back to it. Anyone out there who to can resolve this before I have to pay for repairs?

    Take it to somebody with more experience fixing iPods.

  • IPod 4 only working when conected to mains after battery replacment and stuck in recovery mode when conected to power

    HI, 
    i have replaced the screen and battery on my iPod 4 i then tested it and it was working so i sealed it closed. (still working after sealed) (when new batterys are installed it is normally reccomended that you give them a full battery cycle for optium battery life), so i let it die. after this i put it on charge and the lightening bolt sign for charging came on, i left it for a full day and no change in battery life and when disconected it died so i plugged it into the pc and this continued so i reset it a few times then it decided to loop the apple sign when conected to power. i put it into dfu mode (the only time the pc reconises it) and went to restore it and it came up error 21 (i think) and now is stuck in recovery mode and dies when disconected from power. Lots of probs 
    any help would be apreacheated. thanks

    Take it to somebody with more experience fixing iPods.

  • Sound on ipod 4G only work when earphones

    my ipod speakers do not work and when the earphones are out and i try to put the volume up. it says headset mode or something like that

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price if not under warranty. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Why does my iPod Nano only work when it is plugged into the computer?

    My iPod nana is a 4GB iPod and it does not work at all until it is plugged into my computer. It works perfect when it is plugged into the computer. It will not even turn on if it is not plugged in.

    By the sounds of it, the Nano's battery is shot and in need of a replacement.  You can have replace the battery for a flat fee or send it to a third party repair company for a little less.
    Not much else you can do in terms of troubleshooting this issue.
    B-rock

  • Why does my volume control on my iPod touch only work when i have Earbuds or Headphones or a speaker connected to the headphone jack, and not also when there is nothing in the jack?

    I can't adjust the volume of the iPod Touch when it has nothing plugged into the headphones jack, but i can adjust it when i have earbuds or headphones or a speaker ;plugged into the iPod Touch

    Try cleaning out/blowing out the headphone jack. Insert/remove the the headphone plug a dozen times or so.
    Try the following to rule out a software problem.:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem. Could be a bad headphone jack.
    Apple Retail Store - Genius Bar

  • My ipod nano only works when connected to charger

    i have a 5th gen nano and when i disconnect it from charger it won't stay on. I tried the 5 steps on trouble shooting and reset also still won't come on without charger connected

    Make sure the HOLD switch is in the off position. See Chapter 1, page 8, Disabling iPod nano Controls - iPod Nano 5th Gen. User Manual (direct PDF download)
    Also try restoring your iPod. Directions for doing so is also in the manual.

  • IPod mini only works with car charger!

    My iPod mini only works when it is plugged into a car charger. It is 4 months old. It does not work (frozen - no response or display at all) on its own, or plugged into the AC charger, or the USB connection on the computer. I have tried the reset procedure several times and with different power connections with no results. The iPod seems perfectly fine when using a car charger otherwise nothing! Whats going on!!?!?!
    Anyone else with this problem??

    Try to reset it.
    Press and hold the MENU and CENTER buttons - at the same time - until you see the Apple logo. This should take about 6 seconds. Also, you want to do this procedure while your iPod is connected to your computer. Ipods are supposed to work with USB port cable and AC Adapters, not only car chargers.
    If this doesn't work, then try to update it using iPod Updater software. Open iPod Update, plug in your iPod to your computer and wait until the software recognizes it. Once it does, you should be able to click on the "Update" button. If you can't, click "Restore"

  • Classic iPod not charging; only works when plugged in

    My iPod Classic would work only when plugged in my computer or to the wall. I noticed that when I plug it, the battery automatically turns green and the fully-charged symbol appear. However, when I unplug it, it doesn't work. Any ideas on what I can do? It's no longer under gaurantee so anything that I can do at home would be helpful. Thank you xx

    Seems very unlikely you need a new Macbook since it works when "plugged in"; at worst you will have to spring for a new battery.
    Try running this program - it will give you info about the state of the battery:
    http://www.coconut-flavour.com/coconutbattery/

  • My Ipod touch will only work when plugged into a itouch radio.  When I take it out, it goes blank.  Why can I do?

    My Ipod touch will only work when plugged into an Itouch radio.  When I take it out of the charger, it goes blank.  The battery shows fully charged.  It appears that the battery is no longer charging.  What should I do?

    Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button

    I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button .

    Try connecting it to another PC, if it is ok, then your PC has some software conflict with iTunes.
    If it hangs other PC also, then your iPod Hardisk, maybe bad.
    Do the disk diagnosticas posted earlier by tt2, to check the health of your Hardisk.
    Have a nice day!

  • My iPod only works when plugged into a wall socket!

    Anyone know why my iPOD only works when plugged into a wall outlet? I tried it on the Bose docking station and also my MacBook and it won't work!
    Any ideas??

    Sounds like a dead battery.  You can have Apple swap out the battery for a flat fee or you can send it to a third party service center to have them do the same for job a little less.
    B-rock

  • My ipod only works when its being charged!

    my ipod only works when its charged. when i unplug it the screen slowly fades out and i can no longer turn it on. and when i connect it to the computer it doesnt even connect! can someone please help me???!!!!
    ipod video   Windows XP  

    "my ipod only works when its charged."
    Then it sounds like a battery problem.
    Try these.
    My iPod won't turn on.
    iPod has no power and appears frozen.
    iPod battery doesn't charge.
    If none of the above help, then it may be an issue that requires service.
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.

Maybe you are looking for

  • Does the imac support blu ray playback

    ????

  • Counter in ODS

    GUYS HELP ME I have a DSO and I want to have a field in the DSO to be a sequential counter. It always starts at 0 (zero) and as the records are loaded I want to increment the number by 1. How can I do this?

  • Inserting variables into other variables

    I have several objects that have similar names, like slot1, slot2, slot3, etc. I also have a function that is supposed to do something to the first object, then the next, then the next, etc each time a button is pressed. Is it possible to insert vari

  • Odiwaitfordata refused to detect data change after 24 hours

    hi all, I created a package that run circularly which begins from a odiwaitfordata(wait for the flag to be 1) and ends to it . But when i update the flag to be 1 24hours after the package started, the odiwaitfordata did not detect the flag change. my

  • Mac PSE 6 missing Sharpen filters

    When originally installed I had the option to choose Sharpen filters including Unsharp Mask. That somehow disappeared. I have reinstalled twice and still don't find that filter option. Any ideas? Using OS 10.4.9. PS CS3 still has those filters as doe