IPod Classic plays music, but will not show in iTuens or My computer

My ipod was working perfectly fine until 2 nights ago. I never had a problem with it then it just randomly disconnected from iTunes. I I safely removed it then plugged it back in and it froze iTunes, and didn't show in My Computer. After repeating the 5R's several times, I finally got the iPod to show, but it shows on My Computer as a drive that needs to be reformatted (both in normal and in disk mode) and I can't access it at all, when I click the ipod icon, the folder freezes for about 5-10 minutes then goes back to normal and tells me it can;t be accessed and needs to be reformatted. It will randomly show in iTunes but it will tell me that it needs to be restored to factory settings, which iTunes will not do for me.
The iPod itself works perfectly fine when its not hooked into my pc. It does everything its supposed to do. I tried hooking it in other PC's with different OS (all Windows) and I get the same result.
I also noticed that when I go into the iPod settings, it tells me that 28mb is free, when there should be about 30-40gb free. I have tried to use software like copy trans, stellar Phoenix and others but any program that tries to access the drive will freeze, lock up the pc or get a windows error.
I'm using an 80GB iPod Classic, running XP. The iPod, when hooked in, shows the typical connected logo with the two half circle arrows spinning. I get no error codes or messages other than Windows telling me it needs to be reformatted and iTunes telling me to restore it. I have no way--that I know of--to access any data on it. There is nothing in the iPod except for music and 2 videos, I haven't added any extra files to it in 2 weeks.

Same problem here - 80 gb classic and same thing happened to me this week - plays fine alone - when hooked to computer says it needs to be reformatted and then when i try to reformat i get error 1415 can't reformat - this is bs and im not shelling out for another ipod - why would it work fine but when connecting it to windows suddenly not work> I think Itunes 10 has got some issues

Similar Messages

  • Front row plays music but will not show photos

    When i try to view my photos in Front Row all that happens is music plays but no photos are shown. Front row says that there are 186 photos to show, however, there is nothing to view once I start the show.
    Any help with this?

    Any help with this?

  • IPod Classic no music, freezing iTunes, not showing up, HELP????

    I have a used iPod Classic 120GB. I bought it off my friend. I took it home and added my files (about 5,000 songs and 13 videos) to his stuff (about 6,000 songs) and ended up with it being about half full. I let it sync, then ejected and disconnected. But it said there was nothing on it. I went back and reconnected it to my iTunes. The iTunes froze, and I couldnt access the iPod in anyway. I disconnected it, and when I did it unfroze everything, and popped up in iTunes, saying that the iPod was missing.
    I checked the iPod's "About" section and it said that it had 56GB of "Other". I took it back to my friend and he said he deleted the folder with everything in it. It is empty now except for 1.2 GB of who knows what, but still freezing my system and not showing up.
    I have tried restarting it, and putting it into disk mode. Nothing worked.
    HELP
    Version: 2.0.1 PC
    Message was edited by: black-belt-boy

    jartis wrote:
    HI, i am having the same issue with my ipod. Can you please tell me what you mean by putting on "disk mode" and deleting the files? Thanks
    First let's make sure the drive is physically OK...
    *Check your iPod with Diagnostics Mode*
    It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    <hr>
    Assuming you've ruled out a physical problem with the iPod's drive we can now move on to check for logical problems...
    *Check iPod hard-drive for errors*
    Hold Select+Menu on the iPod for about 6 seconds until it resets, then hold Select+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Open iTunes and in the Sync tab of the preferences menu check *Disable automatic syncing of all iPhones & iPods*. Now connect your iPod to the computer, wait until it connects, then close iTunes. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore. It might also pay to check the status of the source drive containing your media, particularly if no errors were found on the iPod.
    And if that still doesn't help try Erase your iPod - The Super Fix for most iPod Problems. Basically a low level format of the iPod’s hard drive to get around whatever problems are stopping iTunes from restoring it.
    Once you've restored your iPod don't rush to dump all the data back exactly as it was before. I have found that lots of large or complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
    *Break up large transfers*
    In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
    tt2

  • My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!

    My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
    I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
    Can anyone please help?

    Hi gscoops,
    Welcome to Apple Support Communities.
    You may find the steps in our iPod Troubleshooting Assistant helpful:
    http://www.apple.com/support/ipod/five_rs/classic/
    Best,
    Jeremy

  • TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

    I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

    What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
    The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
    Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
    If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
    if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
    If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

  • This an IPOD I bought used.  Everything else works fine.  It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine.  Any ideas?

    This an IPOD I bought used.  Everything else works fine.  It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. I should say it connects but then immediately disconnects.  Any ideas?

    Then my last suggestion is to Reset it, while connected to the BMW Audio.
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • Downloaded music but is not showing up on ipod

    My music that I purchased from iTunes is downloaded, is showing up in my music, but will not sync to iPod.
    What did I do wrong & how do I fix it?
    Thanks

    Were you able to connect you iPod before? Has anything changed since then?

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I have an ipod classic original and it will not connect to itunes for me to sync new music

    i have an ipod classic original and it will not connect to itunes for me to sync new music

    The first two generations of iPod (that used a standard 6-pin Firewire cable) don't work with Windows. There was a workaound through MusicMatch for the second-gen, but I have no idea if that software is still available, or even if it will install on a modern copmputer (Windows ME, 2000 and XP era).
    If instead of original, you mean the first model that got labelled as "classic," with a dock connector, if you describe exactly what appears on both the iPod and the PC screen when you plug it in, somebody might be able to help you. My first recommendations would be to (1)try a different USB cable, to see if that's the problem, and then (2) try synching with a different computer, to see if your PC is the problem. If neither of those result in success, then the community here can help you to try troubleshooting the iPod itself.

  • My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    Hey there Kellee,
    It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Start with these three steps, and there are more in the article if you need them.
    1. Update iTunes
    Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
    2. Check the USB cable
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    3. Verify that Apple Mobile Device Support is installed
    iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
    Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
    Reinstall iTunes for Windows XP
    Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
    If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT4528 A song I purchased shows up in iTunes, but will not show up on my iPhone.  When the phone is plugged into the computer, iTunes shows that it is on my iPhone, but it is not.  How do I get that song to show up on my iPhone?

    A song I purchased shows up in iTunes, but will not show up on my iPhone.  When the phone is plugged into the computer, iTunes shows that it is on my iPhone, but it is not.  How do I get that song to show up on my iPhone?

    I have the same problem and it only affects the one song, everything else syncs

  • My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    My G Drive will not show up on my desktop for use. It did yesterday. It is not full and currently the light turns on and seems to be running but will not show up on my desktop. What can I do?

    1. verify on another Mac first. and another port.
    2. very likely dead SATA card
    read about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

  • Bookmarks toolbar Firefox 10.0.2/OSX 10.6.8 - gone. View Toolbars Bookmarks Toolbar - checked. Dragging URL's to bookmarks toolbar area no longer works. Gray area appears/disappears when checked/unchecked but will not show any or accept new bookmarks.

    My bookmarks toolbar in Firefox 10.0.2 Mac OSX 10.6.8 suddenly disappeared. View>Toolbars>Bookmarks Toolbar is checked. Dragging URL's to the bookmarks toolbar area no longer works. The gray area appears and disappears when checking/unchecking under View/Toolbars menu, but will not show any or accept addition of bookmarks.

    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
    *Open the Customize window via "View > Toolbars > Customize"
    *Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
    *If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • My Ipod touch plays music but every time I open an app that I have downloaded it closes immediately.  This started happening after updating to the latest version of Ipod software.

    My Ipod touch plays music but every time I open an app that I have downloaded it closes immediately.  This started happening after updating to the latest version of Ipod software.

    Here's a couple things to try:
    1. Reset the iPod by holding the sleep/wake button and home button at the same time for 10-15 seconds until the Apple logo appears on the screen.
    2. Uninstall and reinstall one of your purchased apps. Sometimes this can rectify the issue.
    3. Connect the iPod to iTunes and restore it. New system software usually resolves the issue. Make sure you sync before restoring because a restore removes the data from your iPod.
    Hope one of these works for you!

  • DVD Player plays DVDs but will not play VIDEO_TS files from my hard drive

    When logged into my home account DVD Player plays DVDs but will not play VIDEO_TS files that are on my hard drive. I get an error message: "there was a problem opening the media. Media type is not supported." When logged in as "root" DVD player does play these same files. Also, when logged in to my home account, I can play these same files in VLC.

    Go this this thread for more details:
    http://discussions.apple.com/thread.jspa?threadID=1075814
    But the gist of the fix is to delete or rename "~/Library/Preferences/com.apple.DVDPlayer.plist" and let the DVD Player build a new one. It seems that this is caused by a migrated PPC preference that borks DVD Player 5 on Intel Macs, which is what just happened to me. Hope this helps.

Maybe you are looking for

  • ADF mobile deployment

    hi everyone, i'm new on adf mobile and i'm developing and android application using adf mobile and android sdk manager,but i have one problem and this is about the time of deployment,it takes about 10 to 12 minutes every time to deploy the applicatio

  • Wut is thae best program to use to take snapshots with the webcam live! pro?

    and possibly other stuff Message Edited by demonic-me on 03-12-2005 11:33 PM

  • Reporting a developer?

    Is there a way to report a developer of an application so that Apple is aware of their conduct? I getting a bit sick of a particular game developer who is constantly bringing out many different version of the same game (over a dozen different version

  • Selecting many records for each material...

    Hi all, I have an internal table that contains a list of materials. I want to loop over that list and retrieve a group of purchase reqs from EBAN for each material...appending each group of rews to my req table for each pass over the material list. S

  • Using JMF with JBuilder

    I was trying to use JMF with JBuilder 2005 but didnt know how to configure the libraries. I asked many people but no one could help me. I just found a web site about this problem so i would like to share it with those who are facing the same problem.