IPOD CLASSIC problem itunes does not recognise

I've had my ipod for nearly half a year now, but i have been unable to use it until now!
1) when i connect my ipod to computer the screen does not change, remains as the main menu
2) however if i plug it in when the computer is booting up it shows the connected screen and by the time it reaches the main screen it already disconnects on it's own
3) device manager: shows Ipod under +other devices+ with a *yellow question mark*
4) shows this when i plug it in : +"there was a problem installing this hardware. an error occured during the installation of this device. the data is invalid"+
I REALLY REALLY REALLY NEED HELP!!!!!!!!!!

Do you have itunes installed?
If yes, have you tried with another computer?

Similar Messages

  • HT1363 my computer reconizes my ipod classic but itunes does not

    My computer reconizes my ipod classic, however itunes does not. Ipod has been reset and put in disk mode yet still will not connect to itunes. Problem started after an un expected computer shutdown ans ipod was disconnected without being ejected. HELP

    Have you tried all of the troubleshooting here?
    iPod: Appears in Windows but not in iTunes
    B-rock

  • Itunes does not recognise ipod touch

    i've reinstalled the latest version of itunes plus ios 6 and followed the troubleshooting sections for Windows 7 PC but itunes does not recognise the ipod touch.  the USB cable is ok (charges the ipod anyway) but when I run diagnostics it does not see an ipod.

    iOS: Device not recognized in iTunes for Windows
    Try another computer to help determine if you have an iPod or computer problem.

  • Itunes does not recognise the ipod after update to itunes 8.2.0.23

    Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
    The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
    Thanks for your thoughts!

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • My NEW iPod Classic 160GB (2013) does not sync with iTunes on my PC Windows 7 Starter

    My NEW iPod Classic 160GB (2013) does not sync with iTunes on my PC Windows 7 Starter. I have like 1975 songs and some videos, but also somtimes the PC does not recognize it, sometimes it does, either ways I can't get my music in the ipod.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    I synced by ipod touch with itunes and it wiped all my music.  Now itunes does not recognise my ipod.  How can i fix this?

    Here
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X
    Does the iP{od work OK
    Does it charge when connected?

  • Itunes does not recognise CDs................please help

    i've had my ipod for a few months now and it hasnt been a problem before as it has always imported CDs fine onto my ipod but recently whenever i insert a CD into the drive itunes does not recognise that i have put a CD in and it cant be the CDs that i put in as i have leant one of them to my friend and she said its worked fine on her itunes, when i insert the CD and go onto run CD diagnostics this comes up,
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    FUJITSU SIEMENS P5SD1-FM2
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce 6200SE TurboCache(TM)\GeForce 6200SE TurboCache(TM)
    IDE\DiskST3160023AS____________________________3.00___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomHL-DT-STDVDRRW_GWA-4164B_______________1.03___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: HL-DT-ST DVDRRW GWA-4164B, Rev 1.03
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRRW GWA-4164B on -128(0xffffff80) media at speed 0X.
    i dont even understand what this means, please help!!!!!!!!!!!! thanx xxxx

    Well the report just tells basics of your setup and errors going on in short. Error -128 means either you or iTUnes cancelled the burn before it even started.
    Your issue tho is you have no lower filter. you should have 2, and upper filter and a lower filter. Now Im not that good with the filter thing just yet, but I think if you reinstall itunes it will install the lower filter you need.
    You will want to remove itunes AND quicktime in the control panel>Add/remove. Dis able any antivirus/security programs so they do not interferr with iTUnes and then download and install the latest iTunes from www.apple.com

  • Solution .Itunes does not recognise your your burner

    If itunes does not recognise your burner, look in (my computer) if you have more drive than you actually have.if this is the case, you have a logical drive. You must go in your control panel and disable it. When you will try to burn .Itunes is gonna see your burner and ask you if you want to use it .

    I also have a similar problem.
    I have an 80g. Library was in fine working order.
    Now, I had my computer wiped out, with a new itunes library.
    I want to transfer my ipod music to my itunes library, but all of the programs to help me do this will not recognize my ipod, even on disk use and manual settings.
    What do I do without clearing my ipod music?

  • Itunes does not recognise ipad or iphone after window 8.1 patch May 2014

    Last week my laptop did a patch update to windows 8.1 and now  Itunes does not recognise  my ipad or iphone when i plug them into the USB ports.
    The devices do ask "to trust the computer" and Windows itself reconises the ipad and iphone and i can get to files on the apple products through windows but itunes doesnt see them and therefore doesnt sync  therefore i cant download music onto my phone etc.
    Ps i did uninstall itunes and reinstalled but this didnt work.  Although after reading about other people with similar  issues on past window updates I think  I may need to uninstall all apple software .
    I have an old Ipod 5G that works fine with Itunes.
    Anybody with similar issues and a plan to get this sorted ?...... as i need music on my phone for holiday !!

    Hello andyv,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue of your iPad not being recognized by iTunes on your Windows PC please follow the troubleshooting in the article below:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Take care,
    Alex H.

  • I have forgotten my pass code how can I unlock my iPhone 4 without using iTunes as my iTunes does not recognise my phone

    My iPhone 4 has not been working for the last 4months....I have just recently decided to give it another go and it seems to be working but I forgot my password. I would use iTunes to reset but my iTunes does not recognise my iPhone.... Is there anything that can be done

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • HT1923 itunes does not recognise CD's uploaded ,    can't connect to server it states  ,

    itunes does not recognise CD's uploaded 
    can't connect to server it states
    although PC is connected to the internet itunes can't find the connection 
    have an ipod nano
    this is complicating things as I can't change what's on the ipod either

    Try a hard reset by pressing the Home button and Wake / Sleep button at the same time, keep them both pressed until the Apple Logo appears on the screen.
    This does not lose any data on your iPad.

  • I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

    In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

  • I have an ipod touch  and Itunes does not recognize device.  What can I do?

    I have an ipod touch  and Itunes does not recognize device.  What can I do?

    See:
    iOS: Device not recognized in iTunes for Windows

  • I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano anymore. I have tunes to download

    I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano. I have tunes to download

    B noir
    Yes that is correct
    Okay. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • How can i connect my iphone 4 s with itunes? itune does not recognise the iphone when it is connected

    Hi, i have received an iphone 4s from japan! whwn i connect it to my pc, itunes does not recognise it. what can i do?

    For this issue you might try a couple things.
    First, try to restart the Apple Mobile Device service by clicking Start and searching for Services. Stop the service, then restart the service.
    If that doesn't work, you can remove and reinstall iTunes.
    http://support.apple.com/kb/HT1923
    This article will help with that process. Follow it exactly.

Maybe you are looking for

  • Issue with Grn Reversal

    Hi Experts We are facing  an issue with regard to GRN reversal for a purchase order. When we try to DO a GRN reversal the system message states " no suitable item found" . The Po has multiple line items and Goods receipt Document for the line item fo

  • [SOLVED]Laptop Internal SD card reader no longer working

    Two weeks ago I purchased a Raspberry Pi and set up my own SD card with Arch Linux ARM using the directions at http://archlinuxarm.org/platforms/armv6/raspberry-pi with the internal SD card reader on my laptop and had no issues.  Today I decided to l

  • Customised archiving object for archiving a Y table

    Hi Guys, I am trying to create a customize archiving object for archiving a Y table. BC_SBOOK is one archiving object which i am using as the template. IT has no archiving calss defined in AOBJ tcode Could you please let  me know if it is necessary t

  • Payment run sorting

    Hi All! Would you know guys how SAP sort vendor open items and how it allocates/assigns checks for each open item that will be paid? Thanks in advance.

  • Best way to create DVD from videos from several events?

    Hi all - I'm very new to iMovie and iDVD and was hoping for some advice. I'm making a compilation DVD "for the grandparents" of videos from a variety of the kids' events throughout the year. What's the best way to do this? By the way, I've switched t