IPod Classic synchronises and works in car but otherwise is dead

I have an iPod Classic 30GB which synchronises with my Mac's iTunes perfectly well, and when I plug it into my car (bmw 1-series with iPod control via satnav) I can play my music. However, when the iPod is not connected to the Mac or car it is unuseable, with an almost-dark, locked screen. I've tried restoring it via iTunes but this hasn't helped.

bump

Similar Messages

  • My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

    My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

    Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

  • Connect to car, IPOD Classic pauses and will not play

    Hello to all,
    First of all I am not very good at computer stuff. I used my IPOD Classic for about three months with a car kit and all was fine. All of a sudden it stopped playing. I figured out that the IPOD pauses when it is connected to the wire from the car. I have tried connecting it with the car off, on, radio off, on all with the same result, as soon as the IPOD detects the wire it pauses. My radio will only play the IPOD not control it. Any ideas?? This is driving me mad. I don't understand why it worked for months and then suddenly stopped. Thanks in advance for any help.
    Matt

    I'm having the same problem. I updated my ipod in itunes and now my car's usb deck will not recognize the ipod. It had been working for years without a problem. I emailed kenwood and they said apple pushed out an update that is causing compatibility issues with car decks. They suggested a "soft reset" which did nothing. Kenwood told me to contact Apple and Apple wants me to pay for support. Guess I'll surf around this forum till I find a way to revert back to an older version of the ipod software.
    Here's the thread from kenwood:
    Dear Mr. Lapteff,
    Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
    I understand you are having an issue with playing back your Ipod. If you recently updated your Ipod to the newer iOS4 software version we recommend attempting to soft reset the Ipod and attempt reconnecting to your head unit. The available updates from Apple have caused some issues with connectivity. For information on resetting your Ipod we recommend visiting www.apple.com.
    Please feel free to contact us again with any additional questions.
    Steve
    Product Support Representative
    Kenwood USA Corporation
    Area: Car & Home
    Topic: Troubleshooting
    First Name: andrew
    Last Name: lapteff
    Email: [email protected]
    Product Model: KDC-MP342U
    Zip/Postal Code: 19128
    Subject: Ipod won't play via usb
    Body: After working perfectly for years, my Ipod will not play on my KDC-MP342U for the last 2 weeks. The KDC-MP342U just flashes, "reading" but never syncs. I tried resetting and restoring my Ipod, but I still can't get it to work on my deck.
    Any help would be greatly appreciated,
    Andy Lapteff:)

  • IPod Classic 5G 80GB is not docking but USB works fine. Ideas?

    My iPod 5G 80GB Classic not docking to a few new radios I bought. I tried the Luna Voyager and also the Logitech Pure-fi Express Plus. Nothing happens (as if I wasn't docking it). The USB connection to my computer works fine. I tried reformatting the iPod, restoring from iTunes, boot diagnostics, etc. and nothing seems wrong. The products state I am supposed to be able to dock this iPod. Any ideas as to what might be going wrong? Could it be the v1.3 firmware or a hardware issue? Anyone knows the protocol and how to diagnose it properly?

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

    I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

    What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
    The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
    Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
    If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
    if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
    If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

  • I can't get my ipod classic (120GB) to work. I am getting error code 1434, and the ipod is making a lot of clicking noises when plugged in

    After coming back from Hawaii, my Ipod classic doesn't work anymore. When plugged into itunes, it says that it may be corrupt, and that I need to restore it. I have tried this, but everytime it gives me an error code of 1434. When I click more information, it sends me to a support page, but not for error code 1434. I tried all of the steps on the page hoping that it would help. Also my ipod is making  a lot of clicking noises when it is trying to run, alomst as if it is skipping inside and can't fully run. Can anyone help me ?

    Clicking sounds from an iPod that has a hard drive for storage is not a good thing.  It usually means the hard drive is faulty.  That is the likely reason for getting an error during the attempt to Restore.
    If you use a Mac, you can try putting the iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility.  Does the iPod appear in the Disk Utility sidebar?  If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one).  Go to the Erase tab.  Set the Format to Mac OS Extended (Journaled).  Name does not matter.  Click on Security Options and choose to write a single pass of zeros over the entire disk.  This serves as a good "stress test" for the iPod's hard drive.  Back on the main window, click Erase.
    This takes longer than a regular erase, but you should see steady progress.  If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
    If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore

  • My iPod classic has stop working and when ever i try to synch it there is a alert saying that do not disconnect it and there are some songs which when i try to play the iPod re-starts again so please tell me what is the issue

    my iPod classic has stop working and when ever i try to synch it there is a alert saying that do not disconnect it and there are some songs which when i try to play the iPod re-starts again so please tell me what is the issue and some sound is comming from the back pannel .
    so please do something about it and give me the solution
    thank you,
    Saajan jain

    To give you something, I need something too, like
    How old is the Ipod? (if it is still under warranty, then send it to Apple service shop)
    Are you running Windows iTunes or Mac iTunes?
    What do you see on the iPod screen?
    My guess is, your iPod classic is more than 2 years old and out of warranty, and the hardisk has gone kaput! and need to be replaced.
    Have a nice day!

  • HT1351 I have just purchased an ipod classic 160GB and decided to sync my itunes music and videos that I purchased via itunes.  All the music sunk but it didnt sync my videos.  It said that they were in the wrong format.  What to do??

    I have just purchased an ipod classic 160GB and decided to sync my itunes music and videos that I purchased via itunes.  All the music sunk but it didnt sync my videos.  It said that they were in the wrong format.  What to do??   I would have thought if I bought the films from itunes it would be compatible with an ipod classic??  How do you change the video format?

    My mistake, it was nothing to do with format.  It woldn't sync because my movies were HD.  HD movies won't sync to an iopd classic 160 GB but when you purchase a HD movie, itunes gives you a SD vervsion of the movie which is compatible with the ipod.  Just needed to go to store, click movies, click purchased and untick the HD box and there you have the SD versions.  Download the SD versions and then sync your ipod and bobs you uncle, movies are on the ipod

  • I have an ipod classic 80G and i been trying to restore it but it doesn't let me help!!

    i have an ipod classic 80G and i been trying to restore it but it doesn't let me help!!

    Add a valid payment method to your account. That is required even for free apps and app updates. If yo think the payment method is valid contact iTunes:
    Apple - Support - iTunes - Contact Us

  • IPod Classic shows up in My Computer, but not in iTunes

    My iPod Classic shows up in My Computer, but not in iTunes. I've gone through the troubleshooting guide, reset it 3 times and put it in disk mode, reinstalled and updated iTunes and still nothing.

    Hey there april_lee!
    I have a website for you that can walk you through the troubleshooting steps on your iPod classic. This will help you determine the source of your issue and hopefully get the iPod working for you consistently again. The website can be found right here:
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    I have an iPod Touch 2 with iOS 4.2.1.  This is the highest version that works on this device.  I checked it once and it had to do with iOS 4.3 and above only supporting the higher RAM CPUs on newer devices.
    Apple does make it harder than it needs to be.  There still remain a number of apps available on iTunes that will work but they are hard to find because you must manually look at each app specs to see if the app supports an iOS below 4.3
    App backups are your friend since iTunes has no way to keep older version of apps.

  • I have an ipod classic original and it will not connect to itunes for me to sync new music

    i have an ipod classic original and it will not connect to itunes for me to sync new music

    The first two generations of iPod (that used a standard 6-pin Firewire cable) don't work with Windows. There was a workaound through MusicMatch for the second-gen, but I have no idea if that software is still available, or even if it will install on a modern copmputer (Windows ME, 2000 and XP era).
    If instead of original, you mean the first model that got labelled as "classic," with a dock connector, if you describe exactly what appears on both the iPod and the PC screen when you plug it in, somebody might be able to help you. My first recommendations would be to (1)try a different USB cable, to see if that's the problem, and then (2) try synching with a different computer, to see if your PC is the problem. If neither of those result in success, then the community here can help you to try troubleshooting the iPod itself.

  • My iPod touch is not working in iTunes, but it is showing up on my "My Computer".

    My iPod touch is not working in iTunes, but it is showing up on my "My Computer". The instructions from Apple Support is NOT effective. Please help.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • I am trying to sync my ipod classic with itunes 11.0.4 but cant. Cant find source on itunes either.

    I am trying to sync my ipod classic with itunes 11.0.4 but cant. Cant find source on itunes either. Can anyone tell me what procedure to follow. I also cant find source on itunes. Ipod do show the connection but cant see anywhere on Itunes
    can any one help with any information

    I'm having sync issues too since I've updated to 11.0.4.  My ipod 160 will no longer sync properly or will hang when attempting to sync yet my 4th gen touch doesn't have any problems.  I am thinking about uninstalling it and rolling back to an older version of itunes.

  • My play/pause button on my Ipod Classic is not working, I am unable to turn off my Ipod or push play. Can this be fixed?

    The play/pause button on my ipod classic is not working, I am unable to turn off or push play on my ipod. Is there away to fix this?

    Do other devices now connect?
    Did the iPod connect before?
    What encryption/security is the router using?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Problem with MuVo Micro N200...please help

    Hey there, I recently purchased a Creative MuVo Micro N200 Mp3 Player with 52 memory. It was working perfectly until yesterday when i tried transfering a few mp3s into the player. I was prompted with a dialog box that read 'cannot create file'. Think

  • How to Make MRBR to show the Customised Payment Block Indicator (MIRO) ?

    Hi Currently, from what I know of, MRBR only showing Log Payment Block as follows: A     Automatically blocked due to existence of blocking reasons S     Stochastically blocked M     Manual payment block set in header - no blocking reasons W     Auto

  • Acrobat 11 and InDesign CS5

    Just installed Acrobat 11 Pro but it doesn't show up in my InDesign as a selectable print option? How do I get InDesign to show Acrobat 11 in the print dialog box? Is there a plug-in I'm overlooking?

  • Can TS work with sql server compact or express?

    I'm don't have much experience with the underpinning of database systems.  I know conceptually how they work and can hack my way through sql queries.  Is there something fundamentally different about a Sql Server Compact itnstall versus Sql Server ve

  • Discoverer item type - how to apply style

    Hi. On OracleAS 10.0.04, we have links to disco portal & viewer (added an item, chose Discoverer as item type, and typed "viewer" / "plus" in the DiscoItem section). These to links does not seem to change according to style changes - always the same