Ipod classic syncing issues with itunes

My IPod classic wont sync anymore and I fear the harddrive might be shot. the ipod deleted all my music randomly, I have restored it but now I cant get it to sync properly with itunes.
Itunes recognises it, and starts syncing (in manual and auto) however it freezes a few songs in and doesnt get any further. When I unplug the ipod, the error message comes up saying ipod sync failed, and lists a number of songs which it could not sync (different songs every time)
Is the problem with itunes or with the ipod harddrive?
Appriciate any help with this one,
thanks,
Phil

Hi pddurie,
If you are having potential disk issues with your iPod, you may find the following article helpful:
Apple Support: 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
http://support.apple.com/kb/ht1207
Regards,
- Brenden

Similar Messages

  • Ipod classic wont work with Itunes

    This is my first ipod purchase and I am not pleased, its 2 days old and still isn't working. I did exactly how the instructions set out how to set it up. I plugged the ipod in, it charged for a few minutes, and a menu popped up on the screen for my language, I selected it and then it went to the connected screen, and continued to charge, I loaded itunes, nothing appeared, so I decided to let it charge to full, after it had been fully charged, still nothing, I have done everything apple have suggested, reset ipod, unistalled itunes, reinstalled, turned off the ipod service and turned it back on again, used a different USB port, itunes just will not find my ipod, therefore I cannot set it up to add files to it. I am extremely disheartened by how incredibley difficult this has been as this is my first apple product

    When connecting to your Mac, make sure it is a high power USB2.0 port on the CPU body, do not use the USN port on the keyboard or any USB Hub.
    If you are connecting to a MacBook Pro, only one USB port can provide enough resource for the high Drain device like the iPod. The other USB port is shared internally with other IO devices.
    Given the huge  amount of iPod Classic sync issues, I would recommend, that you dont use any USB port with other devices, when you are syncing or Restoring any iPod Classic.
    So with the above info
    Reset you iPod while connected to the High power USB port.
    When iTunes comes up and prompt you to Restore, please do so (this will fix any hardisk filesystem corruption)
    Good Luck!

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • Iphone wifi syncing issue with itunes 10.7

    My wife and I each have iphone 4's syncing on our respective computers running Win XP Pro SP3. After upgrading to itunes 10.7 and iOS 6, itunes doesn't reliably sync via wifi. It will sync once then won't a second time unless the computer is rebooted. If I try and click the sync button on itunes, it looks for the displayed iphone then says it can't find it and the iphone disappears.This is happening on both computers. I can direct connect the iphone with usb cable and sync, but it won't sync via wifi without rebooting. I've click the "sync with wifi" button off then on. Nothing works.
    We both upgraded to iphone 5's. It didn't solve the problem. I upgraded my computer to a new desktop running Win 8 Pro. Everything transferred fine and the initial sync went well, but the problem persists. After my iphone 5 sync'd with itunes overnight, the next morning it wouldn't sync again via wifi. Again, trying to initiate a sync from itunes caused the it to look for the iphone and not finding it, the iphone disappeared from itunes. Once I restarted Win 8 and itunes, the iphone showed up in itunes.
    It's not the iphones(it happened with both 4's and 5's), the computers(two differnet computers) or, the OS( happens with Win XP and Win 8) so it's got to be an isssue with iTunes 10.7 and possibly it's interaction with iOS 6. We didn't have the problem before 10.7 and iOS 6 (upgraded same time).
    Any suggestions? This is annoying to not have these reliably sync without intervention.
    Thanks,
    Z

    Just found another thread that helped...deleted the iTunes Library Genius file and now the Mac can load the library!

  • Sync Issues with itunes 11.1.1 on OSX with iPod Classic.

    When I try to sync my iPod - after the upgrade to  itunes 11.1.1 - there are long delays, messages that say ipod cannot be found when it has not been disconnected, and a final sync phase that does not complete. Help appreciated. I am running OSX 10.6.8.

    I´ve fixed this issue as follows:
    1) did a backup of the iPhone in the cloud
    2) reset the iPhone in manufacturing mode
    3) restored the backup out of the cloud
    After that the sync with iTunes worked well also with movies.

  • New ipod sync issues with itunes libraries

    my old ipod classic screen has shattered and a friend has given their old ipod classic, which has been erased of old data, so it is clean.
    the ipod connects fine, but when i go to "sync" in "file" it won't let me, i restored the factory settings on the ipod via "settings" and "reset settings", and restarted pc as itunes requested, but the only way to transfer the music was via "autofil" from "devices" menu, but i still can't autofil movies or tv shows.
    i noticed when i go to "file" it now says "sync songs" rather than simply "sync" but it still won't give me the option to sync, so how do i sync my whole library with my ipod.
    any advice would sincerely appreciated.
    many thanks.

    Not sure why this is occurring - no such problem with my iPad, nor with 3 different iPhones used over the last 4 years.
    Do you have manually manage music and videos selected under the Summary tab for your iPad sync preferences, or are do you have Sync Movies selected under the Movies tab along with Sync Music under the Movies tab and Sync Apps under the Apps tab?

  • Ipod sync issues with itunes 11

    Hello,
    My classic iPod syncs very slowly with iTunes 11, it starts out syncing (2 songs) & then just "sits" with no progress.
    iPod sofware is up to date, version 1.1.2.
    Any help appreciated.
    Thanks
    Lee

    I figured out how to put it in recovery mode and I'm starting over, this ipod is more work than it's worth.

  • Ipad mini syncing issues with itunes : (x) items could not be synced

    I'm using ipad mini (non retina) 16GB with itunes 11.2.2.3. I had downloaded some games from itunes like asphalt 8, GT racing 2, infinity blade, real racing 3, dead trigger 2, and apps like garageband. When i tried to sync these games with my ipad. everything happened normally like
    syncing apps to 'superhornet's ipad' (step 6 of 6)
    copying 1 of 8: asphalt 8
    and later 'finished syncing'
    but after syncing is finished on itunes. A message appears on the ipad saying '14 items could not be synced. see itunes for more information'
    there is no message in the itunes that would tell what issue happened here.
    Due to this, the games i mentioned above does not get installed on my ipad. all i get is their greyed out icons which shows their name below them, when i touch any of those greyed icons they start showing 'installing' which never really completes.
    I have also tried to install apps by ifunbox, but it showed some error when i tried to sync those games.
    This issue doesn't happen with all the games. I had also downloaded games like 'the sandbox, ACR drift, shadow gun and they were installed without any issues.
    I had never played any game on my ipad. so far i had only used it as an ebook reader, video player and internet browser. so i have no idea if this problem existed before.
    and yes my computer is authorized, and i successfully sync all videos, music, ebooks with it.
    my PC's specs:
    AMD phenom II X4 B25
    4GB RAM DDR3 133MHz
    AMD radeon HD6770 1GB GDDR5
    Gigabyte GA78LMT-S2P
    my ipad is running iOS 7.1
    and itunes version is 11.2.2.3 (updated yesterday expecting it would solve the issues)
    I would appreciate if anyone could help me with this

    Found another thread with a few possible solutions. The one that worked for me was to delete the ipod photo cache in the "Pictures" folder. Here's the thread: https://discussions.apple.com/thread/3390697

  • Syncing issues with iTunes

    I keep getting "disk not ejected properly" error message over and over when attempting to sync my iPod with iTunes.
    I'm using MacBook OSX 10.9.4 and an old iPod Nano.
    I've tried restarting computer, restoring Nano, downloading most recent version of iTunes.
    This problem has persisted over several months--sometimes the problem goes away long enough for me to complete a sync, and other times the error message reappears over and over again with a vengeance and I give up until the next day.  Then the next day, sometimes it will work, sometimes not.
    I'm not very tech savvy, but have usually managed to solve computer issues by googling the problem and trying solutions.  This one I've searched and searched only to find that the problem is apparently not uncommon, but few solutions offered.  I believe the problem is an iTunes problem, not my Nano or computer.  I don't want to buy a new nano if the problem is an iTunes issue.

    I think I have a similar  problem. I have a macbook and use itunes to sync my ipod every day. Everything has worked well for years until yesterday when I received the latest itunes update.
    Now I cannot sync my ipod and itunes becomes unresponsive when I attempt to do so. I get that jolly beachball icon and the only way to stop that is to "force quit" itunes.
    I tried (on advice) to restore my ipod to its factory settings but that had no effect and, to date, the only other suggestion I have had is to wait for the next itunes software update which is not very satisfactory.

  • I just bought an ipod classic and synched with itunes.  The main part showed up on ipod but not the playlists.  How can I get playlist to appear on ipod.  Thanks!

    I bought a new ipod classic.  When attempting to synch it made me update itunes to the latest version (there may be a more current one now.)  I did this and when I synched to ipod everything showed up except the playlists.  How do I get the playlist to synch to ipod as well?  Thanks!

    Connect it to your computer and restore it as a new device. Then chose what music you want to sync with it and do so just like your Touch does.

  • Ipod classic music erased, with "iTunes cannot read contents of iPod"

    I went to sync my ipod classic 120GB and before it began, a message popped up telling me that there was a problem with my devices and that they should be scanned and fixed. I went to scan and fix them, but it failed each time. It started syncing but then an error message came up saying, "iTunes cannot read contents of iPod, go to summary tab in iPod preferences and click restore to restore this iPod to factory settings. I took my ipod out of the usb cable and looked to see that my music had all been erased! I went to the preferences tab that it told me to go to and if I restore the iPod to factory settings then all my media will obviously be erased. I have tried a few times since then to re-sync it but it is coming up each time. I had previously had another iPod with this same iTunes account, but it was lost. I bought this new one about 7 months ago and I have had no problem syncing until now. I also had to get a new hard drive for my computer, but that was about a year ago and I illegally saved the music files from my itunes to my new hard drive so I could have all the old music from my ipod on the new one. Is there any way I can get my music back onto my iPod or do I really have to set my itunes back to factory settings and erase all my media?

    I've got a brand new iPod Video 60Gb and i have had this message since the first time i synced it. I think i restored the iPod about 10 times but it's always crashing when i unlupg it. It try to listen to something, the musics are on the iPod but they aren't listed in playlists or under artists or songs.
    Then i plug it to iTunes and i got the message: iTunes cannot read the content.
    I've bought a Belkin card just for it, the one recommended for iPod USB 2.0. Doesn't change anything. I've tried different USB ports, again, nothing new.
    I was just going to try using USB 1.0 but it's sooooooooooooo slow that it will take me like 12 hours to sync the iPod!
    I don't know what to do now, as i can't find if it's a computer problem or an iPod problem...

  • Problem with versioning on iPod, backwards compatibility issue with iTunes

    i apologize in advance because i'm sure this has been asked time and time again, but i did attempt several searches.
    the search function is very muddled and does not narrow down the results very well at all
    here's the situation.
    from all accounts i've heard lots of people having issues with version 7 of iTunes.
    i'm a simple kinda guy who definitely believes in the age old phrase "if it ain't broke, don't fix it."
    so i've stuck with v6.
    i recently got a new laptop along with my PC. so i downloaded and installed the latest iTunes without thinking twice.
    i had completely forgotten about my concerns from hear say about v7 issues.
    i plugged in my iPod and it proceeded to completely erase all of the media on it and then load all media that was on my laptop in place of it.
    "well that's a cool new feature", i thought.
    after my initial frustration wore off, i immediately uninstalled v7, deleted the .itl file and installed v6.
    everything was all fine and dandy. v6 works perfectly on the laptop with no hangups.
    here comes the issue...
    i plug in my iPod to begin rebuilding my media onto it after the completely unauthorized deletion, creditted to iTunes v7.
    as it autoplays and iTunes v6 opens i'm prompted with this error:
    "The iPod [my ipod] cannot be used because it requires iTunes version 7.0 or later.
    Go to www.itunes.com to download the latest version of iTunes."
    i've attempted everything i can think of to completely erase my iPod of any "versioning".
    - i reset it using the "select/menu" button method
    - i reformatted it through XP disk manager
    - i reformatted it through context menu in my computer explorer window
    - i completely just deleted the "iPod control" directory in the iPod explorer window when clicking through the my computer directory
    i'm at a loss.
    i cannot figure out a way to get my iPod to function with iTunes v6.
    and again, i'm really hoping to avoid going to v7.
    iPod information:
    2nd generation iPod nano 4GB
    thank you in advance for any and all information/advice

    I am guessing that you used your iPod enough with iTunes v. 7.x to update the firmware to the latest version. That being the case, reformatting your iPod won't "undo" the firmware update, so your only choice now is to update your iTunes software to v. 7.x.
    FWIW, iTunes 7 is a vast improvement over previous versions of iTunes. I use it on both Windows and OS X, and without bugs in both environments.

  • IPod classic syncing issue

    My iPod classic that I haven't used for a few years only syncs around 3,800 tracks out of around 4,100 that I have as part of my library, even though the "entire library" box is checked on the device in itunes.

    Hi there,
    You may find the artilce below helpful.
    Some songs in iTunes won't copy to iPod
    http://support.apple.com/kb/TS1420
    -Griff W.

  • IPod 5G sync issue with Windows 8

    I have an iPod 5G and recently bought a new Acer laptop with Windows 8. I can open itunes and it claims the iPod is syncing but nothing happens. When I try to eject it I receive an error message stating that files are in use with another application. Any suggestions how I can figure out what other application is running these files? I tried to restore the iPod but received the same error message.

    I am having the same problem. It just won't sync. iTunes always end up shutting itself down or I have to force quit it because it quits responding. My iPhone syncs fine...no problems whatsoever. For some reason my 16gb iPod Touch with 2.1 is hanging up in iTunes 8.

  • HT2729 IPOD Classic sync issues

    I bought a new IPOD Classic to replace my old one.
    I can't sync any of my library.

    Hope this Apple support Article can fix our problem
    .http://support.apple.com/kb/TS1539
    Good Luck!

Maybe you are looking for

  • Easy Photo Print does not see Aperture files

    I have a Canon MP640 printer, which gives me really poor results when used with Aperture (3.1.3) so I have been using the print software that came with my printer (Easy photo print EX).  The problem with Easy PhotoPrint, is that this software does no

  • IPhone 3.5mm jack issue

    Hi, I have a cassette tape adapter that I use with my iPhone to listen to music over my car stereo. With other mp3 players, sound comes out in stereo. With the iPhone, sound is stronger/louder on the right channels only. Same adapter, just different

  • Keyboard layout recognition

    Hi I am an italian user of FCS. As we know the program works by recognizing only the English keyboards. Every time I start the program I must set the keyboard layout in the Default US mode. Is there a way to avoid this? Or, at least, can automate thi

  • MacBook Air will not let me sign in after update

    I just got a new MacBook Air and I did the most recent update this morning. The computer restarted and it takes my password but then it just goes back to the sign in screen. Help

  • Infoview Reports timing out, Freezing and other performance issues

    Hi all, New user and been tasked with a project to try and get to the bottom of a problem our users get using infoview on our network. Now i have very little experience in these kind of things and this is more of a research and learn experience at th