IPod Classic Unknown error 53

I keep running into this error (-53) when loading music or movies onto my iPod Classic.  Any ideas? I have reset the iPod 3 times and still continue to have issues 

This maybe due to USB transfer timeout by iTunes waiting for a task complete signal, which did not come.
While syncing your iPod, I would suggest the following to prevent timeouts.
Disconnect all other USB devices, except mouse and keyboard.
connect only to USB 2.0 port at the back of the Desktop, and if you are using a Mac dont  connect to the keyboard USB port.
Dont connect to USB Hub.
Disconnect from Internet, so dont use twitter or facebook are other apps, which has plugins that conflict with iTunes.
Stop the Antivirus if any.
Try to sync in small batches first.
Have a nice day!

Similar Messages

  • What can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either

    what can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    Hi msclaude,
    Welcome to the Support Communities!  I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201263
    If you can't update or restore your iPhone, iPad, or iPod touch
    You can put your iOS device into recovery mode, then restore it using iTunes.
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
    Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
    If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    I hope this information helps ....
    - Judy

  • Get the following error when trying to sync itunes to Nano itunes could not coppy " Song"  to the ipod because unknown error occurred (-5000).  Any ideas?

    Get the following error when trying to sync itunes to Nano itunes could not coppy " Song"  to the ipod because unknown error occurred (-5000).  Any ideas?

    Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
    tt2

  • HT1339 how to restore an ipod classic with error 1415

    how to restore an ipod classic with error 1415 latest operating system

    Hey there beaver17
    How are you?
    Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
    I did the following:
    My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
    The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
    It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
    Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
    Finally, after the file extraction was done, it began to restore the iPod!!
    I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
    Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
    If it works for you, make sure to share the tip!!
    Kind regards
    Salvador Rivera

  • How can I reset ipod classic when error message 439 shows?

    how can I reset Ipod classic when error message 439 shows?

    The easiest solution and apparently the only approved solution via Apple (although a pain if you haven't backed up your device) to restore the phone if you can't figure out the passcode. It will erase everything but if you have a fairly recent backup then you will be fine...you may only lose anything that was added after the last backup. You can also try searching the Apple Support pages and forum to see if there is another solution. Ultimately, it's a plus to a certain degree that there is no easy way to change the passcode....if someone "found" it and wanted to try to get in to it....but it's a pain when it's a situation like yours.
    .https://discussions.apple.com/thread/3750135?start=0&tstart=0
    http://support.apple.com/kb/HT4113#
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf pg 165

  • "iTunes could not connect to iPhone (its a ipod touch) unknown error OxE8000065. Help!

    Ran updates on my MacBook Pro. Then I updated iTunes,  iPod touch was connected at time, came up with unknown error 1602 during restore and now "iTunes could not connect to iPhone (its a ipod touch) unknown error OxE8000065. Help! ipod screen is black (can see it stopped while charging at 2.53). Have tried many of the suggestions found in Apple support and online.

    http://support.apple.com/kb/TS3694#error1602
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Could not restore 1st gen ipod touch unknown error occurred(2003)

    could not restore 1st gen ipod touch unknown error occurred(2003)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Ipod touch unknown error ocurred 0xE800000A

    Hi,The following error is coming up on my itunes I  have just updated my ipod touch can anyone help?

    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Ipod classic 160gb, error -48, and error -53 when trying to sync to library

    Can you help, i cant load tracks from my library and sync my ipod classic on either of my computers. i am running on both computers uptodate software versions and i have also tried all the usual reset routines but still have no joy becuase now it has lost all my music from the ipod and still wont sync.It initailly syncs until it gets to aprox 1gb full then it freezes and eventually pops up error messages. I tried the link that someone put up on previous post about the error code and tried running the enable disk and scanning for bad sectors but still i have problems. it has been working great with no real problems before now, but my ipod is now over 1 year old, surprise surprise and it is broken just like my last ones after 1 year!
    Can you advise anything? i have run system driver clean up on both computers aswell as ipod when set as enable disk in itunes ,and fixed corrupt sectors but still wont sync, im lost now.
    Someone help please.
    thanks

    I am having the same problem. Sometimes I get an error code and sometimes I don't. I tried to get apple to do something about it however mine is also out of warranty so no luck. I have read about a lot a people having syncing issues like this with their ipod classic and I am kind of amazed that apple is not willing to fix this issue. If I get it fixed or have any luck with apple I will post here. Good Luck.

  • Ipod classic 160gb,error -48 and error -53 when trying to sync library

    Can you help, i cant load tracks from my library and sync my ipod classic on either of my computers. i am running on both computers uptodate software versions and i have also tried all the usual reset routines but still have no joy becuase now it has lost all my music from the ipod and still wont sync.It initailly syncs until it gets to aprox 1gb full then it freezes and eventually pops up error messages. I tried the link that someone put up on previous post about the error code and tried running the enable disk and scanning for bad sectors but still i have problems. it has been working great with no real problems before now, but my ipod is now over 1 year old, surprise surprise and it is broken just like my last ones after 1 year!
    Can you advise anything? i have run system driver clean up on both computers aswell and fixed corrupt sectors but still wont sync, im lost now.
    Someone help please.
    thanks

    I am having the same problem. Sometimes I get an error code and sometimes I don't. I tried to get apple to do something about it however mine is also out of warranty so no luck. I have read about a lot a people having syncing issues like this with their ipod classic and I am kind of amazed that apple is not willing to fix this issue. If I get it fixed or have any luck with apple I will post here. Good Luck.

  • Unable to restore my 5th gen ipod video (unknown error 1418)

    going through, listening to a regular album on my ipod speakers, as i usually do, my ipod just abruptly freezes after the end of one song. upon reseting, i was presented with the apple logo upon a black background, as usual, and then a white screen saying "connect to your computer. use itunes to restore." in four different languages. from there it switches itself off. when i try to turn it back on, it does the same.
    i connected it to the computer to do as it suggested, where it proceeds to freeze my computer for up to 10 minutes, until the ipod does appear in itunes. when i try to restore it however, im presented with an error stating 'an unknown error has occurred. error 1418', or something to that effect.
    so following the apple website's instructions, i updated itunes to 7.6, and tried again to no avail. i tried a different usb port, reregistered .dll files, and updated my windows USB drivers, but this has changed nothing.
    can anybody suggest any other factors that are stopping me restoring. i have accepted the fact that i will need to restore it, its just a matter of now completing that task.
    any help would be greatly appreciated.

    One possible cause is a drive conflict...
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Note the seventh symptom where it keeps needing to be restored.
    Patrick

  • Ipod Restore - Unknown Error

    I turned on my ipod this morning, and updated it from my library, on unpluggin my ipod from the USB, it stopped working, it then began to display the message "Connect to computer, use iTunes to restore". So i did, My computer didnt recognise my ipod. I went through the 5 Rs, restarted my ipod services and also tried to put my ipod into disk mode. This worked, and when I plug it in in disk mode, iTunes finds my iPod and says it has been corrupted (I dont know how) and needs to be restored. I Click Restore and itunes begins to download an update, however it is the firmware for the old scroll wheel ipod, not my 5th gen, without giving me any kind of options, when it tries to install, it brings up an unknown error (number 1418).
    Can someone please help me? Will I have to Send my iPod off for repairs? I hope not.

    Some people have had success trying the fix mentioned here.
    Error 1418.
    Could you also take some time to pass some information for the Apple Engineers?  Please copy and paste these questions into an email, make the subject of the email "iPod error report", add your answers, and send the email to Roy at Apple.
    1. What error code are you seeing?
    2. When are you seeing it (restoring or updating your iPod)?
    3. Which iPod do you have?
    4. What version of Windows do you have?
    5. What Windows service pack do you have installed?

  • Can't restore my ipod touch - unknown error 18 displays....

    My daughter's ipod touch wasn't operating correctly - apps wouldn't update, locked up, etc.  I attempted to back up and restore, but it won't let me restore, instead citing "unknown error 18", but it's now locked in a half-restored state and I can't do anything with it.

    http://www.windowserrorhelps.com/itunes-error-18-ways-to-fix-itunes-error-18-now
    Try placing the iOS device in Recovery Mode and then connect to your computer and restore via iTunes.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Can't write to iPod disk "unknown error -69"

    hi, I've had my 20GB iPod with color display for 6 months and worked beautifully until now. when I connect the unit for an update from my iTunes collection, I get a message saying that writing into the Ipod disk failed and an unknown error ocurred. I reset both the iPod an my computer twice, but it didn't work.
    has anyone seen this before?
    thanks
    c71

    Welcome to Apple Discussions, c71.
    This article should help you with your Error 69:
    http://docs.info.apple.com/article.html?artnum=302684
    Anything else I can do for you, just repost
    rjl

Maybe you are looking for

  • Ibase and configuration error while creating a Service Contract

    Hi, I am creating a Service Contract programatically and not manually through the T-code CRMD_ORDER. I am using the Function module CRMXIF_ORDER_SAVE for the same as the FM BAPI_BUSPROCESSND_CREATEMULTI and CRM_ORDER_MAINTAIN did not work for me beca

  • Address Book Application is gone!

    Yesterday I was working throughout the day uploading some film files to my iDisk. I got the spinning beachball twice and had to force a restart once. In the evening when I was about finished, I wanted to do something in Address Book. I noticed a big

  • Labview 8.20 Crash using vi's created with import dll wizard

    Has anyone had issues with the DLL wizard or DLLs that use the USB port? I have used the DLL import wizard to create an instrument driver for a picoscope 3424. When I run the Initaization.vi it exicutes properly, however, if I close the vi I get the

  • Create two one-to-one self-reference mappings

    We need help on the following problem with Toplink: We have a table massnahme with several attributes. table massnahme massnahmeID prevMassnahme nextMassnahme prevMassnahme, nextMassnahme are self-references on massnahme. We take prevMassnahme and ne

  • What are the Roles and Responsibilities as a Basis Consultant in SRM

    Hi Gurus,          I want to know what are the activity in SRM as a Basis Consultant. I know SRM installation,, but i have no idea how to monitor  and configure SRM server ,, pls help me,, regards, Balaram