IPod Classic won't connect - need to restore. What do I do?

I installed the latest iTunes onto my laptop (Windows 8), and now my iPod Classic won't connect to my laptop or iTunes. It's also telling me I need to connect to iTunes to restore it. I can't connect it to iTunes.
When I plug in the USB cord, It starts the iPod in Disk Mode -  still no connection. What do I do?!

Hi DanielleGuise!
It sounds like your iTunes installation is not recognizing that your iPod is plugged in, so you will need to address that issue before you can restore the iPod. Here is an article that will help you do this:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Similar Messages

  • Ipod Classic Won't connect

    My Ipod classic will not connect iTunes? And every time I do connect it stops Itunes from Working?

    I'm assuming you are using firmware 1.1 on the iPod, you might check with your BMW dealer and see if there is a software upgrade for your BMW that will correct the issue. The 1.0.3 upgrade fixed the connection on my BMW, but I have the post March 2007 iPod connection.

  • Ipod classic won't connect with PC unless reset

    Everytime I conect my Ipod to my windows 7 pc it does not appear in the iTunes list as connected devices, the iPod screen also does not recognise the PC when connected via USB.  Reset the Ipod and it wil then connect as normal.   A reset needs to be done everytime I want to sync.

    A typical case of Antivirus intervention.
    Antivirus has a tendency to freeze iTunes sync Operation with Ipod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes cant read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your Ipod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your Ipod to the PC
    When Itunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck! and have a Nice Day!

  • IPod Classic won't connect to my computer

    When i connect my ipod classic 80gb to any windows computer(i havent tried any mac) it won't even show up
    Thje ipod doesn't even indicate that it's connected
    I tried resetting with menu+middle button but still didnt work
    These are the information i have except the serial number
    Model: MB147LL
    Version: 1.1.2 PC
    Can anybody help me?

    dont trust those dummies from genius bar there very incompetent and there techs terrible at problem solving I've figured out several problems with my ipod 30gb i used it in my car forever and never left my glove box i lost my usb cable and that's when i went to them for answers there was 2 problems 1. was my center click stopped working i fixed that by taking it apart scratching it but i fixed it what happens in the got these rubber boots glued (not very smart)under the wheel there total of 5 of them over time if you leave your ipod in hot place the glue starts melting and rubber boot start to move. 2.is try and go to local store that sells car stereos that have the ipod plug built in will let you use the ipod from the cable charge it. if your ipod works then you know it not bad
    cause it should charge and play the music.anyway i think it cable problem with new USB cable they sell at the stores and don't work with 5th gen ipods. best thing is to look online for new cable that says 4th gen and up try this one
    http://www.walmart.com/ip/Griffin-USB-to-Dock-Connector-Cable-for-iPod-Coiled/13 995979
    don't lisen to them there trained to fix problem fast if the cant fix it they recommend you to pay upgrade price $125.00 and they send your old ipod to 3 party refurbishment center and they pay apple for the old ipods $25-$50
    apple there to make money not care about you just your wallet
    id say about 90% of ipods ive seen can be repairable or nothing wrong with them
    long story short iam sure just your cable that bad and need to be replaced
    if not walmart refund you your money and you havent lost penny
    so if you like to go to local car steroe shop and tell them your looking buy radio that will play and control your ipod and you're there see if it works for your ipod there plug it in and test it for you and it free most car steroes will work with older ipods
    if you ipod works then run wal-mart and buy your self new cable
    hope this helps

  • Ipod classic won't connect to car stereo

    I have a three year old iPod classic - and it no longer will connect to my car stereo - i drive a 2006 volvo xc-70. I plug it in - and it doesn't register or recognize that the iPod is even connected. the ipod stays charged, so i presume that the cable is still connected properly to the stereo - and it works when connected to other devices. is there new firmware or updates that are not compatible?

    Ok, I'm not familiar with the model of head unit you refer to. Maybe it's simply not possible to connect this way.
    Is it at all possible to contact the manufacturer and get there advice.
    As I said, I've never come across a car head unit that connects an iPod via a usb connection. My Kenwood unit has a usb connection and will not recognize an iPod connected in this manner (using the iPod cable). The Kenwood needs the specific iPod multi pin connector.
    Also, simply connecting via usb will probably not supply a charge to the iPod from the head unit.

  • IPod Classic Won't Connect to Computer or iTunes

    My iPod Classic 160GB started to stop showing up both in Finder and on iTunes a few weeks ago. If I connect it to a wall charger then it will still charge, so I'm fairly sure it's not a problem with the cable dock or anything. I've literally tried every suggestion I could find, but nothing has worked so far. The iPod still plays music fine, but it won't sync with iTunes or show up at all in Finder.
    I've already tried resetting it (both while connected to the computer and not) and switching USB ports (it didn't work on another computer's USB ports either). I've tried everything listed on Apple's recommended solutions to this problem. I'm mostly resigned to having to get a new device, but I wanted to check and see if anyone else had any other possible solutions. Once again, I have tried all the basic troubleshooting problems, so please don't give me those. I would appreciate any help you guys can offer, thanks!

    I have this problem too please help.

  • IPod classic won't connect to iTunes after erase in disk utility

    I think my hard drive is failing on my 120gb classic and so I decided to wipe it and start from scratch. Admittedly I rushed into the process and wiped it in disk utility without doing much research. Now it doesn't show up in iTunes but it is showing up on my desktop. Any ideas on how to fix this issue?

    Hi I had a similar issue with my 160gb Classic
    Went through many things with Apple on the phone all to no avail.
    Took it to the Genius Bar and managed to get it recognised by iTunes and then restore....but when i plugged it into my MBA or IMac it was not recognised by iTunes and just appeared on the desktop..again.
    Given that i am using Yosemite and iTunes 12 and reinstalled iTunes, Apple answer was to do a reinstall on my MBA!
    Reluctantly i did this and it worked!!!!!!!!
    It was recognised by the ancient iTunes9 before updating to 12 again and it was still recognised....
    Just got to reinstall all my music, photos, documents.....at least i have my retro 160Gb iPod Classic to load everything on....
    hope this helps

  • HT1320 My ipod classic will not connect to my laptop / itunes

    my ipod classic won't connect to my laptop? I've just syncd my iphone 4s and I've reset the ipod.......help?

    Hello Downing55,
    It sounds like your iPod is not being recognized in iTunes on your Windows computer.  I found an article with steps to address this:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Ipod Classic screen say connect to restore???

    Ipod Classic screen say connect to restore but when I do so it just goes into do not disconnect screen and computer wont recognize it at all
    I tried everything possible, I reseted it multiple times. try hard disk wont work. tried connecting it wont work. it is just usually stuck in the apple logo screen until it tells me to connect to restore and then after that it goes into Do not disconnect and then after a while it just say OK to disconnect but nothing else happens. HELP PLEASE

    Since you stated
         I tried everything possible
    Most likely your iPod hardisk is giving problem, bring it in to Apple store if it is under warranty, else
    do the Disk Diagnostic as posted by tt2.
    It wont fix your problem, but the report will help in troubleshooting.

  • HT1320 how can i save me data stored on a non responding ipod classic and says you need to format before using it?

    how can i save me data stored on a non responding ipod classic and says you need to format before using it?
    in another way : how can i save my date stored on my classic iPOD as a external hard .... when that msgs appears .... volume doesn't contain a recognized file system , make sure the file system is loaded .... then , you need to format ??? can anyone help ?

    It sounds like the iPod's storage has data corruption.  You may be able to treat it like an external drive and use data recovery software on it, but it probably won't work because the system is telling you that the drive needs to be formatted before it is recognized.
    If the problem is data corruption and there is no hardware-related problem on the iPod's hard drive, a Restore should fix the problem.  But this will obviously erase the iPod's hard drive.

  • Ipod classic won't mount after updating to itunes 11.0.2

    ipod classic won't mount after updating to itunes 11.0.2.
    I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
    Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
    I've restarted the ipods 10+ times each.
    All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
    One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
    Machine is a Mac Pro running 10.6.8.

    Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
    Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
    I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

  • New ipod touch won't connect to itunes

    My new iPod touch won't connect to itunes on my iMac.  I have several devices already connected to this itunes library, any suggestions?  Thanks.

    See:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    You need iTunes 10.5 or later and that requires OSX 10.5.8 or later.

  • IPod Touch won't connect or charge AT ALL.

    I can't connect my iPod touch to ANY computer AT ALL. This includes Windows Xp, Vista and an iMac with Leopard. They are all running iTunes 7.6.2. I have tried all protocols I've come by so far none have worked. The iPod simply won't connect.
    The iPod turns on when it is plugged in but after the home screen comes up nothing happens. No charging, syncing or any type of connection. iTunes and the OS don't acknowledge any type of USB device, even in the Device Manager. Apparently it tries since it powers up when plugged in but thats the extent of the connection. I haven't found any other persons with a scenario like this, please help.

    I know you've tried it with other computers, but have you tried it with a different cable? Also have you tried resetting the Touch while it is connected? (Hold down the sleep and go buttons, ignore the power off screen and let go when you see the Apple logo).
    If you get the same results after trying this you need to either make a Genius Bar appointment at your nearest Apple Store or send it in for service: http://www.apple.com/support/oss/

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod classic won't update

    the past few times I've connected my ipod to to itunes, it doesn't update. there's also no "update ipod" option under any menus. ***? anyone know why?

    I have a different issue but my ipod classic won't update either, figure I'd post in the same topic.
    I can download the software but once it extracts, an error message pops up saying my ipod can't be updated and a code (1462) is at the end of the message.
    I have 1.1 and no previous issues with updating or with the ipod. I've tried rebooting it and no difference.
    Any ideas why or what to do?
    Thanks in advance.

Maybe you are looking for

  • How to schedule a job in SM36

    Hello, With SAP R/3 4.6C on windows/oracle, I have 2 dependents jobs. The first one must run in the afternoon and will be schedule by a user and the second one must run during the night only if job 1 had been run by user. Is it possible to do that wi

  • Why do pdf files not open in firefox and display on screen?

    I am unable to view pdf files in firefox and have to default to Explorer. Why is this happening?

  • What is the best way to publish a Captivate file to YouTube?

    I delivered both a SWF and f4v file to a client. They tried converting it into every file format supported by YouTube. But when it plays back, all of the audio and video are out of sync. Has anyone been able to find a solution to this problem? I'm on

  • Zen Nano Plus won't fill complet

    I transferred approximately 4.8 MB onto my new Nano plus and it says it has over 5MB of free space but I keep getting an error message that there is insufficient disk space for more music files. I'm converting to WMA & there's lots of room! I'm using

  • Captivate 6 - How to stop reloading swf?

    Hello! I made Flash Drag&Drop interaction and I imported it into Captivate 6. Unfortunately the interaction restarts every time I revisit the slide and I have to drag and drop from the beginning. I want swf to load only once. I suppose I should use w