Ipod classic won't connect to car stereo

I have a three year old iPod classic - and it no longer will connect to my car stereo - i drive a 2006 volvo xc-70. I plug it in - and it doesn't register or recognize that the iPod is even connected. the ipod stays charged, so i presume that the cable is still connected properly to the stereo - and it works when connected to other devices. is there new firmware or updates that are not compatible?

Ok, I'm not familiar with the model of head unit you refer to. Maybe it's simply not possible to connect this way.
Is it at all possible to contact the manufacturer and get there advice.
As I said, I've never come across a car head unit that connects an iPod via a usb connection. My Kenwood unit has a usb connection and will not recognize an iPod connected in this manner (using the iPod cable). The Kenwood needs the specific iPod multi pin connector.
Also, simply connecting via usb will probably not supply a charge to the iPod from the head unit.

Similar Messages

  • IPod Classic won't connect - need to restore. What do I do?

    I installed the latest iTunes onto my laptop (Windows 8), and now my iPod Classic won't connect to my laptop or iTunes. It's also telling me I need to connect to iTunes to restore it. I can't connect it to iTunes.
    When I plug in the USB cord, It starts the iPod in Disk Mode -  still no connection. What do I do?!

    Hi DanielleGuise!
    It sounds like your iTunes installation is not recognizing that your iPod is plugged in, so you will need to address that issue before you can restore the iPod. Here is an article that will help you do this:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Ipod Classic Won't connect

    My Ipod classic will not connect iTunes? And every time I do connect it stops Itunes from Working?

    I'm assuming you are using firmware 1.1 on the iPod, you might check with your BMW dealer and see if there is a software upgrade for your BMW that will correct the issue. The 1.0.3 upgrade fixed the connection on my BMW, but I have the post March 2007 iPod connection.

  • IPod Classic won't connect to my computer

    When i connect my ipod classic 80gb to any windows computer(i havent tried any mac) it won't even show up
    Thje ipod doesn't even indicate that it's connected
    I tried resetting with menu+middle button but still didnt work
    These are the information i have except the serial number
    Model: MB147LL
    Version: 1.1.2 PC
    Can anybody help me?

    dont trust those dummies from genius bar there very incompetent and there techs terrible at problem solving I've figured out several problems with my ipod 30gb i used it in my car forever and never left my glove box i lost my usb cable and that's when i went to them for answers there was 2 problems 1. was my center click stopped working i fixed that by taking it apart scratching it but i fixed it what happens in the got these rubber boots glued (not very smart)under the wheel there total of 5 of them over time if you leave your ipod in hot place the glue starts melting and rubber boot start to move. 2.is try and go to local store that sells car stereos that have the ipod plug built in will let you use the ipod from the cable charge it. if your ipod works then you know it not bad
    cause it should charge and play the music.anyway i think it cable problem with new USB cable they sell at the stores and don't work with 5th gen ipods. best thing is to look online for new cable that says 4th gen and up try this one
    http://www.walmart.com/ip/Griffin-USB-to-Dock-Connector-Cable-for-iPod-Coiled/13 995979
    don't lisen to them there trained to fix problem fast if the cant fix it they recommend you to pay upgrade price $125.00 and they send your old ipod to 3 party refurbishment center and they pay apple for the old ipods $25-$50
    apple there to make money not care about you just your wallet
    id say about 90% of ipods ive seen can be repairable or nothing wrong with them
    long story short iam sure just your cable that bad and need to be replaced
    if not walmart refund you your money and you havent lost penny
    so if you like to go to local car steroe shop and tell them your looking buy radio that will play and control your ipod and you're there see if it works for your ipod there plug it in and test it for you and it free most car steroes will work with older ipods
    if you ipod works then run wal-mart and buy your self new cable
    hope this helps

  • IPod Classic Won't Connect to Computer or iTunes

    My iPod Classic 160GB started to stop showing up both in Finder and on iTunes a few weeks ago. If I connect it to a wall charger then it will still charge, so I'm fairly sure it's not a problem with the cable dock or anything. I've literally tried every suggestion I could find, but nothing has worked so far. The iPod still plays music fine, but it won't sync with iTunes or show up at all in Finder.
    I've already tried resetting it (both while connected to the computer and not) and switching USB ports (it didn't work on another computer's USB ports either). I've tried everything listed on Apple's recommended solutions to this problem. I'm mostly resigned to having to get a new device, but I wanted to check and see if anyone else had any other possible solutions. Once again, I have tried all the basic troubleshooting problems, so please don't give me those. I would appreciate any help you guys can offer, thanks!

    I have this problem too please help.

  • Ipod classic won't connect with PC unless reset

    Everytime I conect my Ipod to my windows 7 pc it does not appear in the iTunes list as connected devices, the iPod screen also does not recognise the PC when connected via USB.  Reset the Ipod and it wil then connect as normal.   A reset needs to be done everytime I want to sync.

    A typical case of Antivirus intervention.
    Antivirus has a tendency to freeze iTunes sync Operation with Ipod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes cant read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your Ipod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your Ipod to the PC
    When Itunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck! and have a Nice Day!

  • IPod classic won't connect to iTunes after erase in disk utility

    I think my hard drive is failing on my 120gb classic and so I decided to wipe it and start from scratch. Admittedly I rushed into the process and wiped it in disk utility without doing much research. Now it doesn't show up in iTunes but it is showing up on my desktop. Any ideas on how to fix this issue?

    Hi I had a similar issue with my 160gb Classic
    Went through many things with Apple on the phone all to no avail.
    Took it to the Genius Bar and managed to get it recognised by iTunes and then restore....but when i plugged it into my MBA or IMac it was not recognised by iTunes and just appeared on the desktop..again.
    Given that i am using Yosemite and iTunes 12 and reinstalled iTunes, Apple answer was to do a reinstall on my MBA!
    Reluctantly i did this and it worked!!!!!!!!
    It was recognised by the ancient iTunes9 before updating to 12 again and it was still recognised....
    Just got to reinstall all my music, photos, documents.....at least i have my retro 160Gb iPod Classic to load everything on....
    hope this helps

  • HT1320 My ipod classic will not connect to my laptop / itunes

    my ipod classic won't connect to my laptop? I've just syncd my iphone 4s and I've reset the ipod.......help?

    Hello Downing55,
    It sounds like your iPod is not being recognized in iTunes on your Windows computer.  I found an article with steps to address this:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • When using USB input iPod classic won't read in new car

    Just bought a new car with a factory iPod ready stereo system. When using the USB input iPod Classic won't read but son's iPod touch does. Anyway I can fix this? I know my Classic works fine as I was using it in my other car and it works in my wife's car. Is the car just too new therefore making my Classic incompatible and soon to be obsolete?

    the best option is to contact the car manufacturer or look at the manual to make sure it supports your ipod verision. if it is a custom radio then look then contact the manufacturer or look at the manual for same thing. you can try a reset with http://support.apple.com/kb/ht1320.

  • After iOS5 update, iPod no longer connects to car stereo

    Hi,
    my husband and I both have an iPod touch 4th generation.
    We also have a Dodge Caravan with a car stereo, that lets up hook up the iPods and control them over the display. The cable does not charge the iPods, but we knew that.
    I have updatedt my iPod a while ago and never encountered any problems with the car stereo.
    My husband updated his iPod to iOS5 today, and the car stereo does not connect via the cable. On the iPods display it just says, an error has ocurred.
    Would that be a hardware issue? The iPod is a month or two past warranty. We already tried restarting and resetting the iPod (not to factory settings).
    Is there maybe a way, to return the iPod to iOS4?
    Thanks for any help

    Sometimes, when you cannot "see" your ipod, it is because the drive that was assigned to the ipod, when you connected it, is already being used by the other devise. Your ipod is connected, but is "under" the other item, which means that you have to disconnect that item, so that you can "see" it. It will not be one of the drives that are normally associated with the computer like the C drive, or the ones assigned to your disc drives. It would be a drive that was assigned to an external devise, or another USB devise. This may or may not be your problem, but it is worth a shot.

  • Ipod classic won't mount after updating to itunes 11.0.2

    ipod classic won't mount after updating to itunes 11.0.2.
    I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
    Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
    I've restarted the ipods 10+ times each.
    All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
    One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
    Machine is a Mac Pro running 10.6.8.

    Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
    Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
    I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

  • After updating to 4.3.5, my iPod Touch nolonger works on my car stereo! Any idea how to restore Version 4.3.4

    Don't know if any other users have had this problem?
    I have updated my iPod Touch (4th Generation) to the latest software version (4.3.5) but now I can no longer use my iPod Touch with my car stereo.
    I drive a brand new Chevrolet Orlando, & until I updated to 4.3.5, My iPod Touch work perfectly with the inbuilt car stereo, including the steering mounted controls & displaying track names, artiest, album, Etc.
    Ever since the update, I have lost the display on the stereo, but it still recognises that I have pluged the iPod in.
    The only way I can get my iPod to play is by playing a track through the inbuilt speaker (on the iPod) & then plugging it into the car stereo.
    When I do this thou, I have no control over what is being played as I am unable to skip tracks/play list/Etc & I have no track information, which I could do when my iPod Touch was running software version 4.3.4 & below!
    Is there any way I can reinstall version 4.3.4? I have tried to do a restore through iTunes, but it keeps installing 4.3.5! I have tried to reset my iPod, but again it reinstalls 4.3.5
    Any help & advice would be great!
    IVA

    Just to add a bit more information here! LOL!
    Tried the followind devises on the car stereo & here are the results -
    My Wifes iPhone 3G running iOS 4.3.2 = Worked fine!
    My Sons iPhone 4G running iOS 4.3.4 = Worked fine!
    My Sons iPod Classic running iOS 2.2.1 = Worked fine!
    My Daughters iPod Touch (3rd Gen) running iOS 4.3.3 = Worked fine!
    I think this rules out the problem being with my iPod Touch, as it is the only Apple product we as a family own which has been updated to 4.3.5! The rest of my family are now holding off updating there's! LOL!!
    IVA

  • Connection to Car Stereo

    I have an ipod connection into my car stereo in my Infiniti.  I was hoping to replace my ipod with my Blackberry Storm and be able to play it through my stereo system.  Is there a cable that will fit my car connection and the Storm?

    First, I don't know what type of connection your car stereo has, but as for me, I am using a simple male 3.5mm to RCA jack cable (See link below) for my car and it works wonderfully.
    http://www.buy.com/retail/product.asp?sku=203945380&listingid=32518714&dcaid=17902
    Message Edited by enzo_mmx on 12-10-2008 12:46 PM

  • How can I play my ipod classic 30G thru my older home stereo? Radio Shack guy sold me a head phone adapter to use in the head phone socket on the stereo with the other end attaching to the ipod. It doesn't do anything. Are there settings I need to make on

    How can I play my ipod classic 30 G thru my home stereo system? The guy at Radio Shack sold me an adapter for the older, larger headphone adapter on my stereo receiver with an ipod attachment on the other end. It doesn't work. Do I need to make special settings on the ipod? Should it work? I read elsewhere that I need a Y connector.  Thanks for any help.

    The headphone jak on your stereo is an output, not an input.  You cannot route music into your stereo throughthe headphone jack.
    You can get a cable that connect from the headphone output of the ipod to the stereo inputs on your stereo:
    http://www.amazon.com/gp/product/B000V0G2C4/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539 851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B000YK1JAG&pf_rd_m=ATVPDKIKX0DE R&pf_rd_r=0MQ2G1EDXDZ3DYEW327X

  • Ipod classic won't update

    the past few times I've connected my ipod to to itunes, it doesn't update. there's also no "update ipod" option under any menus. ***? anyone know why?

    I have a different issue but my ipod classic won't update either, figure I'd post in the same topic.
    I can download the software but once it extracts, an error message pops up saying my ipod can't be updated and a code (1462) is at the end of the message.
    I have 1.1 and no previous issues with updating or with the ipod. I've tried rebooting it and no difference.
    Any ideas why or what to do?
    Thanks in advance.

Maybe you are looking for

  • Win 8.1 Pro dism /Online /Cleanup-Image /RestoreHealth returns Error: 14098

    I am running Windows 8.1 Pro and have recently been experiencing some odd behavior.  This has lead me to discover that my component store is corrupt. I have attempted to use sfc with no luck and have posted that on a separate thread. When I attempt t

  • How do i move itunes to external hard drive to free up space on my imac

    I keep running out of space on my imac (320mb) I have my movies on a Lacie hard drive. How do I put itunes on the hard drive? Thanks

  • Numbers not appearing

    I have set up a 10 by 12 grid on my dashboard. When I preview the flash file, the numbers in some of the cells disappear. They reappear when I click on the cell and adjust the number upwards. Any ideas for a fix or can anyone recall an earlier post t

  • Connecting BB pearl to macbook via bluetooth?

    ive been trying to get my blackberry pearl to sync to my macbook via bluetooth but i havent been able to. does anyone know how to resolve this issue? PocketMac also seems to freeze a lot also whenever i try to open the application.

  • Block diagram expansion criteria

    Sometimes when I hold down Ctrl and drag a box or line on the diagram in order to expand it, the diagram does not expand. In the areas where this happens, sometimes I can do the same thing repeatedly with no results--there is no expansion of the code