IPOD Classic won't show up in Itunes 9.0.2.25

Hello, Hopefully someone here can help me. I upgraded from Itunes 7.6 to 9.02.25. It looked like it loaded fine, I downloaded music to the library, but when I plugged my IPOD in, it dings, says "connecting" on the IPOD screen, but never shows up in ITUNES. It does list under my computer, for about 3 seconds, before it says "ejecting" and disconnects itself. I have tried everything at this link - http://support.apple.com/kb/TS1363 - twice - including doing a full recovery on my computer. I tried switching the usb cable and port, I've rebooted the ipod several times - and in disk mode 2x, I also tried the troubleshooting here - http://support.apple.com/kb/TS1493. Basically, I've deleted itunes about 20 times and reloaded. I finally thought, screw it and tried to load 7.6 back (i have it on disc, as I live in a rural area and couldn't freaking download it a couple years ago) but i just get an error that I can't download the 7.6 version as I have a newer library. BTW, Apple support basically said, Yep. sounds like a problem. Never heard of that before. What the heck is left to do?

Solved it. In my case, I had used a utility program I found in my Utilities folder called iPod Software Updater that I tried to updated the iPod software with... (it looked like it worked and then I used the restore function, which deleted all the music)...but it would still not appear in iTunes. Finally after a few hours of resets and restarts, I pressed the select and play keys for 6 secs and triggered a reset while I had the iPod plugged into the computer. Bingo...it showed up in iTunes and prompted me to download new software...which I did and now its back. Geez Apple, how did the iPod become such a killer product with an interface like this? So I assume this utility was for a different iPod model or older version OS.

Similar Messages

  • HELP!! iPod Classic won't show up in iTunes, and FREEZES when I try

    Last night, I hooked my iPod Classic to my computer to sync it. It didn't show up in iTunes, and instead, it froze, quite suddenly. I had to wait until the battery ran down, then charge it up again(luckily, all my music and video were still present). Today, I tried once again to hook it up. This time, the "Connected/Eject before disconnecting" screen appeared, so I figured it was working(that didnn't happen last night, it just froze immediatly). Unfortunately, I was wrong. It still hasn't shown up in iTunes, and now, it's frozen again!
    WHAT is going on?

    PT wrote:
    In order to see the post link, you need to drill down to the subtopic level of a discussion area. If you see a list of subtopics, you are not down far enough.
    For example, from the main discussion menu, you can choose Classic iPod and you will see the following...
    Note that in the Classic discussion there are three sub-topics you can choose and NO post link yet. Now pick any sub-topic, for example, pick "Using iPod Classic" and you will get the following...
    Now you have a link to post a new topic.
    Cheers,
    Patrick
    Ummm....ok, thanks for answering the completely irrelevant question that someone else asked, but how about dealing with the actual topic of this thread?!
    Seriously, why did my iPod Classic freeze when I tried to hook it up??? It happened twice. It seems to be working now, but still, I'm concerned.

  • Hi, my 120gb ipod classic is not showing up in itunes, and everything is gone. how do i format it on microsoft ' format portable audio player ' ?

    hi, my 120gb ipod classic is not showing up in itunes, and everything is gone.
    how do i format it on microsoft ' format portable audio player ' ?
    the device has just installed necessary drivers to microsoft upon plugging in
    like a say though, not showing up in itunes still
    before it recently had this failure, it had shown up as corrupted and that it needed restoring (but i was holding off, as i manually managed all music and was hoping for a way to back it all up, to no avail)
    first time posting here, would appreciate a quick answer because tempted to just click the 'restore device defaults' option
    Many thanks

    same thing here

  • My ipod classic won't show in itunes after a restore

    My ipod classic would only show apple logo. So I restored it following the appe support instructions. Once this was done it said do not disconnect, ipod will appear in itunes. But it doesn"t and there is still the apple logo on the screen of the ipod.
    Any idea ?
    Thanks

    Be patient please.
    Your iPod hardisk filesystem need to be repaired
    Use DiskUtility, select your iPod, click First Aid and press Repair.
    However if you want to troubleshoot it yourself.
    To change from diskmode to normal mode.
    Disconnect the iPod from PC
    press Menu and Center button for 10 secs till the Apple logo comes ON, then let go of the buttons.
    This will bring you to Normal iPod mode, if your iPod harddisk and battery are good.
    If you hear clicking sounds, during the reset, your iPod hardisk is dying.
    Good Luck!

  • My 2nd Gen iPod Touch won't show up in iTunes but does appear in My Computer

    When I connect my 2nd Generation iPod touch to my laptop it will not appear in iTunes. It does, however, appear in my Computer.
    I have worked through all of the troubleshooting guides on the Apple Support section, and have uninstalled and reinstalled iTunes twice.
    This message appears every time I plug my iPod in, and frequently whilst it is still plugged in charging:
    'MobileMe Service has stopped working.' This is a pop-up window produced by Windows, I know this is the 'service' that picks up an iPod's prescence but stopping and restarting the service does nothing. My iPod still won't show up.
    Please help, I am willing to faff around a bit. Might it be a problem with Windows itself? If so, how would I go about fixing it?
    Thanks in advance,
    P.S I have the latest version of iTunes, and the operating system of my iPod is 4.2.1.
    My version of Windows Vista is 32-bit.

    I have the same problem with my 2nd gen itouch.
    I've tried other computer and my childrens iPods work on my computer so not a windows problem.  I've tried reinstalling iTunes and resetting itouch as per apple support pages but nothing, it doesn't even show on my computer. Any help greatly appreciated :-)

  • Ipod touch won't show up in Itunes

    I have an Ipod Touch and it shows up as internal storage in Windows 8.1 on HP laptop, but won't show up in Itunes no matter what. I have tried uninstalling and reinstalling Itunes, deleting the contents of the temp folder, changing USB ports, and changing user accounts in Windows and it still won't show up in Itunes. However, it will show up in Itunes on a different computer with Windows 7.

    Did you remove and reinstall all Apple software. not just iTunes?
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • IPod nano won't show up on iTunes

    I got a new iPod nano 4GB (3G) last week and it worked fine for a while. Yesterday, I installed a new DVD burner and drivers (Memorex) in my computer and now, my iPod won't show up on iTunes. It says: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
    I unistalled iTunes, QuickTime, Apple Software Update, iPodService, Safari, and anything Apple from my computer and installed them into different folders. However, I'm still getting this problem even after multiple reinstalls AND system restore. Can anyone help me? Thanks in advance for your help!

    Hey yall, at one point I had this problem and tryed these things>>> Try putting the white cord into a different USB port.(make sure that it is not dusty(blow in it to clear it out)). The day I got my ipod nano my computer had been on and would do it(very slow) so try restarting computer and then different USB port. You may also try resetting your iPod nano if you cant fix it. To reset turn hold switch on and then off and then hold the center butten and the MENU butten together for 6 to 10 sec. Hope this helps! Let me know!

  • IPod nano won't show up on iTune

    I got a new iPod nano 4GB (3G) last week and it worked fine for a while. Yesterday, I installed a new DVD burner and drivers (Memorex) in my computer and now, my iPod won't show up on iTunes. It says: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
    I unistalled iTunes, QuickTime, Apple Software Update, iPodService, Safari, and anything Apple from my computer and installed them into different folders. However, I'm still getting this problem even after multiple reinstalls AND system restore. Can anyone help me? Thanks in advance for your help!

    I have the exact same problem. It connects fine, and I have the updated version of iTunes, but when I plug it in, it says "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPos's software."
    I tried to delete iTunes completly off of my computer, but it said that, "A later version of iTunes is already on this machine. Removal cannot continue."
    I need to fix it before school starts or else I'll be bored out of my mind in English!
    PLEASE SOMEONE HELP US!!

  • Ipod Classic does not show up in iTunes and will not sync

    My ipod classic does not show up as a device in iTunes. It was working just a week or so ago, but each time I plug it in the screen says connected, then switches to Ejected, you can now disconnect, then says OK to disconnect and then goes to the home screen. Can someone advise me on what is going on and what I need to do to fix it! Thanks!!!

    Hello MSavaski,
    Thanks for the question. Depending on your symptoms, the following articles may provide a resolution to your issue:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Also, the following troubleshooting assistant may be helpful:
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thanks,
    Matt M.

  • My iPod touch won't show up on iTunes but my iPhone does, My iPod touch won't show up on iTunes but my iPhone does

    My iPod touch doesn't show up in iTunes but my iPhone does help

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • IPod Classic won't show up in Windows or iTunes?

    I've recently gotten an iPod classic, and when I went to sync it to my iTunes, it wouldn't show up in iTunes or Windows. It won't charge either, and my iPod doesn't say it's connected. I plugged in my iPod Touch and my iPhone, and they both synced just fine and were recongized by iTunes. I've tried troubleshooting, uninstalling and reinstalling iTunes, updating drivers, and even downloading older versions of iTunes, but to no avail. I hooked it up to another computer that was running an older version of iTunes, and it worked perfectly. I don't understand what's wrong, and it's really frustrating me. How do I fix this?

    Refer to this article:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716

  • Ipod Classic won't sync to my Itunes on an external hard drive

    So before I could sync my Ipod classic to my Itunes just fine. Then I downloaded episodes of Avatar and suddenly my Ipod won't connect with itunes. I tried connecting it but it didn't work and now all the stuff I had on my ipod is now erased yet somehow its saying I have 2 gb left. I can open my itunes on my computer and play music and t.v shows fine but when I connect my ipod it dosen't open my itunes anymore and seems to only connect the computer like when it connects windows is just like oh hey matts ipod is connected and will open a window with my stuff etc. I have reset my ipod still nothing and I'm scared to reinstall itunes because I will lose my data. Now my external hard drive is disk E and my ipod is disk F if that helps any. Again I just want my t.v shows and music back on my ipod.

    by the way when I tried to sync my ipod for the second time it deleted all my music, movies and songs everything I had on there but it still says it has 2 gb left

  • My iPod touch won't show up in iTunes, but charges and shows up on different computers.

    My iPod touch 5th gen last was synced with my iMac a couple weeks ago. Now when I plug it into iTunes, it won't show up. It's done this before and I've fixed it by updating iTunes, restarting the iPod/computer etc, but it seems I've tried everything. I've connected it to different USB ports, and it charges in all of them but doesn't show up. When I plug it in, Dropbox recognizes it and can get the pictures off, but iTunes won't work. I tried connecting the iPod to a different computer, and it showed up in iTunes just fine. I have the latest version of iTunes. I didn't restore my iPod from the other computer because if I can't get it to re-sync with this computer I'd rather not lose all my data. It seems I need to reinstall iTunes, but I don't know how- will it delete all my music that I already have on there?
    Any help would be greatly appreciated, thanks!

    I had this issue, I fixed it by going to:
    Start > Control Panel > Devices and Printers
    Then find the iPod, and Right Click > Properties > Hardware > Properties > Driver > Update Driver > Update Automatically
    The driver had not been automatically installed, and windows found and installed the driver files for me. Took ~90 seconds, and then the iPod began it's sync process almost immediately after. Hope this helps anyone with the same issue! I'd try this before re-installing iTunes.

  • 80 GB Ipod Classic does not show up in itunes or Win Vista Machine

    Hi, I recently updated my itunes software with ver.8 and since then my 80 GB Classic ipod does not show up in itunes or in my computer. Hence, I am not able to sync my itunes. When I connect my ipod it just shows "Connected - Eject before disconnecting" and just freezes there. Pls help?

    Hi. When I connect my ipod to any microsoft device, sometimes my ipod doesnt connect. I cant charge it, or restore it as it behaves like a useless piece of plastic.. I get a yellow bubble 'Device not recognized or has malfunctioned'
    This problem is bizarre! I cannot find anyone who actually has a solution for this problem! Apples standard answer is for me to reinstall my drivers or update itunes or windows. Done it. No solution yet.
    My ipod works fine.... sometimes. Its a completely unpredictable problem. Ive googled this problem and so many ipod classic owners have asked.. solutions ive tried: the 5r's, updating drivers, It managed to connect once, but now it wont. My ipod normally works fine on my PC, XBOX, laptop and Mac.. but sometimes, unpredictably, it wont be recognized by anything apart from the mac. For a month it would not connect at all and I took it in to an Apple store where they told me it works fine. Its not my PC.. its up to date, and theres no reason why it doesnt work on my XBOX because some times it does.. last night it did, today its broken again, I suspect tomorrow it may work. This is SO frustrating!!
    I have alot of experience in PC's and normally I can solve a problem by process of elimination, updating and reinstalling, but in this case.. everything seems fine. My only idea is that maybe its my Sync cable?? Which also makes no sense because it generally connects fine on the mac - and, why would a sync cable be unpredictable.. surely it either works or it doesnt. HELP PLEASE!!
    Nick.
    my email is: [email protected]
    my serial for my 80g classic is 8K819CPKYMV and is under warranty until May 2009, i bought it in August this year.

  • Why my ipod classic is not show up in itunes or windows

    Hi everyone, I have a problem with ipod classic 120g when i connect it to computer don't show up in itunes or windows is been a few months that i don't sinc any music;before was ok  no problems at all but now can't do anything not even reset because my computer don't identified

    Howdy fabianfromchicago,
    Thanks for using the Apple Support Communities.
    If your iPod classic is not appearing in iTunes on your Windows PC, then I'd like you to please follow the steps in the link below.
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    Have a great weekend,
    Alex H.

Maybe you are looking for

  • Append in FTP Adapter

    Hi All, We have a requirement to use Append function in FTP adapter to write the contents into same file. We are using Append="true" in our FTP WSDl but it was not working. Any help is highly appreciated. Thanks and Regards, Nagaraju .D

  • Quicktime and iTunes won't play anything, require computer restart.

    Since installing Lion and the latest iTunes, I cannot consistently play songs or videos in iTunes (or Quicktime, for that matter). I hit the play button and it changes to a pause button, but the file doesn't progress past 0:00. I try pausing and rest

  • JAXB 1.0 release date?

    According to the JAXB web site, http://java.sun.com/xml/jaxb/index.html: "JAXB 1.0 will be available as an optional package for the Java(TM) 2 Platform, Standard Edition (J2SE(tm)). JAXB may be included in future releases of J2SE or the Java� 2 Platf

  • Can't open a file with acme.

    i installed acme in aur with yaourt -S acme and i try to open a file with acme but this does not seem work. this is output when i try to open an exist file. Warning - File hello.txt, line 1 (Zone <untitled>): Offset assembly still active at end of se

  • Need urgent help on Java Bean

    Can some one help me to find a place for step by step documentation on how to create java bean and load an image thru java Bean on a form. I'm not loading from the same server it must be loaded from a different server. Very urgent please. I really ap