IPod Classic won't show up in Windows or iTunes?

I've recently gotten an iPod classic, and when I went to sync it to my iTunes, it wouldn't show up in iTunes or Windows. It won't charge either, and my iPod doesn't say it's connected. I plugged in my iPod Touch and my iPhone, and they both synced just fine and were recongized by iTunes. I've tried troubleshooting, uninstalling and reinstalling iTunes, updating drivers, and even downloading older versions of iTunes, but to no avail. I hooked it up to another computer that was running an older version of iTunes, and it worked perfectly. I don't understand what's wrong, and it's really frustrating me. How do I fix this?

Refer to this article:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716

Similar Messages

  • My ipod classic doesn't show up on windows or itunes, i have restored it quite a few times, it doesn't seen to make any difference

    my ipod classic (new to me- ebay) does not show up on windows or in itunes, i've gone thru troubleshooting, can't really tell if i've successfully restored it or not, and can't seen to add it to my device mgr. I have tried rebooting computer, any ideas would be great

    Hello bithedz,
    Have you had a chance to look at this Apple support document related to your issue? If not, it would be a good place to start.
    [iPod not recognized in iTunes and Mac desktop|http://support.apple.com/kb/TS1410]
    And if no luck there, try manually forcing your iPod into *Disk Mode* using the instructions provided in this Apple support document with your iPod connected to your Mac. This should help your iPod mount as an external drive at least on your system so that you can view it from a Finder window and perform a reformat on it if desired.
    [Putting iPod into Disk Mode|http://support.apple.com/kb/HT1363]
    And if you are able to finally get your iPod recognized by iTunes, I would definitely recommend performing a restore of it there.
    B-rock

  • I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

    I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

    In iTunes, select the iPod in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.
    There should be a checkbox that says Enable disk use.  Check it and Apply the change.  It should now appear in Windows, when the iPod is connected.
    NOTE:  When Disk Use is enable, you have to eject the iPod (in iTunes) before physically disconnecting it from computer.

  • My ipod classic won't show in itunes after a restore

    My ipod classic would only show apple logo. So I restored it following the appe support instructions. Once this was done it said do not disconnect, ipod will appear in itunes. But it doesn"t and there is still the apple logo on the screen of the ipod.
    Any idea ?
    Thanks

    Be patient please.
    Your iPod hardisk filesystem need to be repaired
    Use DiskUtility, select your iPod, click First Aid and press Repair.
    However if you want to troubleshoot it yourself.
    To change from diskmode to normal mode.
    Disconnect the iPod from PC
    press Menu and Center button for 10 secs till the Apple logo comes ON, then let go of the buttons.
    This will bring you to Normal iPod mode, if your iPod harddisk and battery are good.
    If you hear clicking sounds, during the reset, your iPod hardisk is dying.
    Good Luck!

  • HELP!! iPod Classic won't show up in iTunes, and FREEZES when I try

    Last night, I hooked my iPod Classic to my computer to sync it. It didn't show up in iTunes, and instead, it froze, quite suddenly. I had to wait until the battery ran down, then charge it up again(luckily, all my music and video were still present). Today, I tried once again to hook it up. This time, the "Connected/Eject before disconnecting" screen appeared, so I figured it was working(that didnn't happen last night, it just froze immediatly). Unfortunately, I was wrong. It still hasn't shown up in iTunes, and now, it's frozen again!
    WHAT is going on?

    PT wrote:
    In order to see the post link, you need to drill down to the subtopic level of a discussion area. If you see a list of subtopics, you are not down far enough.
    For example, from the main discussion menu, you can choose Classic iPod and you will see the following...
    Note that in the Classic discussion there are three sub-topics you can choose and NO post link yet. Now pick any sub-topic, for example, pick "Using iPod Classic" and you will get the following...
    Now you have a link to post a new topic.
    Cheers,
    Patrick
    Ummm....ok, thanks for answering the completely irrelevant question that someone else asked, but how about dealing with the actual topic of this thread?!
    Seriously, why did my iPod Classic freeze when I tried to hook it up??? It happened twice. It seems to be working now, but still, I'm concerned.

  • IPOD Classic won't show up in Itunes 9.0.2.25

    Hello, Hopefully someone here can help me. I upgraded from Itunes 7.6 to 9.02.25. It looked like it loaded fine, I downloaded music to the library, but when I plugged my IPOD in, it dings, says "connecting" on the IPOD screen, but never shows up in ITUNES. It does list under my computer, for about 3 seconds, before it says "ejecting" and disconnects itself. I have tried everything at this link - http://support.apple.com/kb/TS1363 - twice - including doing a full recovery on my computer. I tried switching the usb cable and port, I've rebooted the ipod several times - and in disk mode 2x, I also tried the troubleshooting here - http://support.apple.com/kb/TS1493. Basically, I've deleted itunes about 20 times and reloaded. I finally thought, screw it and tried to load 7.6 back (i have it on disc, as I live in a rural area and couldn't freaking download it a couple years ago) but i just get an error that I can't download the 7.6 version as I have a newer library. BTW, Apple support basically said, Yep. sounds like a problem. Never heard of that before. What the heck is left to do?

    Solved it. In my case, I had used a utility program I found in my Utilities folder called iPod Software Updater that I tried to updated the iPod software with... (it looked like it worked and then I used the restore function, which deleted all the music)...but it would still not appear in iTunes. Finally after a few hours of resets and restarts, I pressed the select and play keys for 6 secs and triggered a reset while I had the iPod plugged into the computer. Bingo...it showed up in iTunes and prompted me to download new software...which I did and now its back. Geez Apple, how did the iPod become such a killer product with an interface like this? So I assume this utility was for a different iPod model or older version OS.

  • IPod Classic won't sync, restore or register in iTunes

    I currently have my 160GB iPod classic plugged into my MacBook Air and it is giving me the "Do not disconnect" warning. If my predictions are correct I should about to be prompt with a notification via iTunes that my iPod needs to be restored. As I predicted, iTunes sends me this notification: "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes" is the prompt I'm given. I click restore and of course, it gives me an error prompt (1434). Only after all of this am I able to properly disconnect my iPod from my computer but the process repeats itself anyway because the iPod wasn't successfully restored nor was I allowed to enable disc use- which may be my issue.
    I've done the following suggestions as per iTunes and discussions.apple.com
    -restarted my computer
    -checked for iTunes update
    -tried a different USB plug in
    -computer>devices>ipod>uninstall
    I've heard that uninstalling iTunes once you've backed up your music is a good way to do it but I'm praying there is an easier and less time consuming way to deal with this issue. I've already spent three hours the first round and twelve plus the second round with this problem so I'm hoping there's an easy solution I just haven't tried. But I'll do what it takes to get my 160GB freedom back. Thanks!
    Sincerely a VERY frustrated Apple customer!

    See Corrupt iPod classic.
    tt2

  • Restored iPod Classic won't download some songs purchased on iTunes

    OK, so I just restored my iPod Classic so it could receive software updates through my new Mac Book. But now a few songs that I purchased from iTunes (all more than a year ago) will not upload to my iPod Classic. Songs that I purchased from iTunes during the past few months appear to have uploaded without a problem.

    That didn't help directly, but you got me to sign on to iTunes and, to make a long story short, discover that I actually have two iTunes accounts. I think I signed up for the second one mistakenly when I activated my iPhone. All the songs that wouldn't play, were purchased under the account that wasn't yet authorized on this computer.
    So now I have a new question for you. Is there any way for me to merge the two iTunes accounts?

  • Ipod won't show up in windows or itunes

    hey; i just got a replacement ipod back from apple; the directions say that it is formatted for a Mac, and needs to be reformatted for windows. The problem is that in my new Vista computer, it will not recognize it at all. Any advice?

    Refer to this article:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716

  • My Ipod Touch Won't Show as a device in iTunes

    Hope you can help,
    I'm running all the latest software (ie 10.5.6) on my iMac 2.GHz Intel Core 2 Duo.
    When I connect my iPod Touch, iPhoto automatically opens and the device is shown but my iTunes remains un-opened. When I manually open it and re-try to connect the ipod still no joy! But my iPod WILL charge whilst connected.
    This has only just started happening!!
    I've tried:
    • re-installing the latest itunes
    • re-setting my ipod
    • re-starting and re-connecting
    • using different USB ports
    Can anyone shed any light to my situation?
    Thanks

    DW76 wrote:
    Thanks but already tried this.
    If you haven't already try restarting your iMac.
    If the iPod does not show up in iTunes after reinstalling the Apple Mobile Device Service, the issue could be related to the USB connection.
    Make sure the iPod touch is directly connected to the back of the iMac, using the cable that came with it. Also disconnect any other USB devices, other than the keyboard and mouse. This article: http://support.apple.com/kb/TS1286 more tips for troubleshooting USB connections.
    -Jason

  • Ipod classic won't restore error 1439 appears in itunes

    my ipod classsic has entred disk mode after dropping it but it won't restore an error 1439 appears in itunes. what can i do or would buying another ipod be better

    Hey chjesc,
    I have an article for you that addresses this error code and may be able to provide you with some further information regarding this issue:
    iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    http://support.apple.com/kb/ts1372
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • IPod Classic won't connect - need to restore. What do I do?

    I installed the latest iTunes onto my laptop (Windows 8), and now my iPod Classic won't connect to my laptop or iTunes. It's also telling me I need to connect to iTunes to restore it. I can't connect it to iTunes.
    When I plug in the USB cord, It starts the iPod in Disk Mode -  still no connection. What do I do?!

    Hi DanielleGuise!
    It sounds like your iTunes installation is not recognizing that your iPod is plugged in, so you will need to address that issue before you can restore the iPod. Here is an article that will help you do this:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Games I bought years ago, Texas Holdem and iQuiz will no longer transfer to my iPod Classic. They show in my computer "Apps" but they won't transfer. They no longer show that they can be "Re-Downloaded" from "Previously Purchased" they don't exist there.

    Games I bought years ago, Texas Holdem and iQuiz will no longer transfer to my iPod Classic. They show in my computer "Apps" but they won't transfer. They no longer show that they can be "Re-Downloaded" from "Previously Purchased" they don't exist there.

    Have you seen this article?
    Syncing and troubleshooting iPod games
    B-rock

  • Ipod classic won't mount after updating to itunes 11.0.2

    ipod classic won't mount after updating to itunes 11.0.2.
    I updated to itunes 11.0.2 today, after delaying it for a looong time (I have it @ work and don't like the new layout).
    Since then, none of my ipods will mount/show up/update. I've tried all USB ports, 3 ipods, 3 cords. Wondering if you know of any issues. I've restarted the mac about 15-20 times today since as soon as I hook up an ipod, itunes immediately spins the beach ball and won't let me click out of it.
    I've restarted the ipods 10+ times each.
    All of the ipods DO show up on my desktop though. Just not in itunes anywhere with 11.0.2.
    One more thing: It's not the cables or the ipods: they both mount fine when connected to my laptop (running old *** 10.4.11 and itunes 9.)
    Machine is a Mac Pro running 10.6.8.

    Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
    Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
    I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

  • My 2nd Gen iPod Touch won't show up in iTunes but does appear in My Computer

    When I connect my 2nd Generation iPod touch to my laptop it will not appear in iTunes. It does, however, appear in my Computer.
    I have worked through all of the troubleshooting guides on the Apple Support section, and have uninstalled and reinstalled iTunes twice.
    This message appears every time I plug my iPod in, and frequently whilst it is still plugged in charging:
    'MobileMe Service has stopped working.' This is a pop-up window produced by Windows, I know this is the 'service' that picks up an iPod's prescence but stopping and restarting the service does nothing. My iPod still won't show up.
    Please help, I am willing to faff around a bit. Might it be a problem with Windows itself? If so, how would I go about fixing it?
    Thanks in advance,
    P.S I have the latest version of iTunes, and the operating system of my iPod is 4.2.1.
    My version of Windows Vista is 32-bit.

    I have the same problem with my 2nd gen itouch.
    I've tried other computer and my childrens iPods work on my computer so not a windows problem.  I've tried reinstalling iTunes and resetting itouch as per apple support pages but nothing, it doesn't even show on my computer. Any help greatly appreciated :-)

Maybe you are looking for

  • Java Web Start opening code not app

    For the past year I have had no problems opening up *.jnlp files with Java Web Start. Starting last week when clicking on any link to launch a Java app I get the code opening up in TextEdit. For example when I click on 'Welcome to Web Start' on this

  • Mac OS X Leopard....Blue screen

    Hi, I've just tried to install Mac OS x Leopard. All I get is a blue screen on booting up. HELP !!! What do I do?? If I try to reinstall holding down the controll key nothing happpens. It appears to be totally locked. Please please advise...thanks

  • Controllable Cache Store issue ?

    Hi, I try to use the controllable cache store, but i am getting the following error.below i have mentioned the scenario,error and environment.please help Scenario : i have multiple caches which is using the distributed scheme. And i created one cache

  • RMI and Netbeans

    hello, i have develop a simple application using RMI. It was running perfectly from command prompt. Then i imported the project into netbeans 6.1. Then when i run it the server looks running normally but when a client try to connect to the server it

  • Database is not discovered.

    I've added 2 new database targets in Grid Control. One of the targets is used as primary database and the other one is physical standby. Data guard configuration is set manually and is working well. However when i click "Verify Configuration" in Grid