IPod Classic works and connects but does not synchronise

Hi! I have a 2007 160gb iPod Classic and I know at 8 years old you'd expect things to be falling apart, but I'm not ready for Bryan the iPod to die just yet and if I can fix him I'd very much like to
So the iPod has the standard age related issues of jumping a bit in songs and making loud whirring noises but I'm cool with that - it's characterful haha. The main issue at the moment is that the iPod won't synchronise on any software. I've tried to synchronise on several computers with both iTunes and Spotify and when I press the sync button this happens:
iTunes / Spotify does nothing
The iPod makes some noises and shows the 'Synchronising' screen for about 4 seconds
The iPod goes back to the 'connected' screen
iTunes sometimes freezes, or still does nothing
I've tried resetting the iPod, which was hard because iTunes kept freezing - but I did it! Made no difference.
The iPod is recognised by the computer/software and shows up in My Computer
It's fully charged
I'm using Windows 8 and the most recent iTunes
Help me if you can! Please! Thanks

Hi Brendan,
I am having a similar issue where I have recently updated my PC and managed to re install itunes and brought my library across however problem starts when I cannot transfer my latest music to my ipod classic.
Tried restoring it etc, it managed to transfer my latest music but delete my old ones and it wouldn't sync with my itunes library.
Please advise..
Thanks

Similar Messages

  • IPod classic recognized by iTunes, but does not sync properly...

    When I sync (automatically or manually, I've tried both) my 160gb iPod on iTunes, the iPod says "Syncing" for a few moments before changing to "connected" (as if it were done syncing). My iTunes shows that the iPod is syncing, yet nothing happens.
    I have reset my iPod, and restarted my notebook, but this problem seems to persist. I have not restored my iPod and/or removed iTunes and reloaded it, as both of these take significant time.
    Any suggestions would be appreciated.

    I would go the restore route myself. Shouldn't take super long. Ya not quick, but sure beats not being able to sync it at all.
    Cheers,
    Patrick

  • My ipod works in itunes but does not appear in "my computer" after I changed the properties

    My ipod works in itunes but does not appear in "my computer" after I changed the properties.
    First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
    showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
    chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
    no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
    or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
    Any help would be very much appreciated. Thanks.

    Hi,
    To show up in Windows Explorer, you can try placing the iPod into
    disk mode.
    Moreover, i recommend you to
    restore ipod to factory settings.
    If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
    Here is an article you can refer to below:
    http://support.apple.com/kb/TS1369
    To get more help, you can also redirect to apple support forum:
    http://www.apple.com/support/ipod/
    Thanks!
    Andy Altmann
    TechNet Community Support

  • TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    not recognized by anything: http://support.apple.com/kb/TS1369
    recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
    solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
    (make sure you go to the next slides.

  • My iphone won't turn on at all and when i connect it to a charger the apple sign just flashes on and off but does not turn on?

    I've tried charging it overnight and it still will not turn on, when connected to the charger the apple sign just goes on and off but does not do anything, i've tried resetting it and this also does not work, but then once taken off the charger it doesn't even say the sign for charging it just does nothing

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • My ipod touch is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed

    My ipod touch (model A1213) is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed.

    2.2.1 is not the latest available for any ipod touch.
    Is yours the original ipod touch?
    If so then:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • IPhone 4s bluetooth connects but does not work handsfree

    My iPhone 4s bluetooth connects but does not work handsfree.  Has worked fine with My iPhone 3s.  The Light on my VW turns green indicating a connect, but the phone does not work through the VWs audio.

    Fixed by power cycling the iPhone

  • Help everyone..anyone!  My ipod is frozen and my computer does not detect.

    Hi everyone I'm very disappointed to say that my ipod photo has been frozen for the past few days. First off, I accidentally disconnected it while plugged into the computer, and now my computer won't recognize the ipod at all. It says that "the device has malfunctioned" and to make matters worse, my ipod is frozen on the main screen. I tried charging it using my wall charger, but it didn't work. I tried pluging it in using usb but the usb doesnt recognize my ipod either. Somehow when my ipod is connected and i start Itunes..it doesn't work and it doesnt read my ipod photo.
    So..Im stuck here and if I can't fix this I'm pretty much done for because I'd have to send it back to Apple.
    Thanks guys.
    Oh and I tried restoring the ipod too but everything says that my ipod isn't connected!

    Have a look at these.
    How to reset the iPod if it appears frozen or doesn't respond.
    It may take quite a few attempts and is best done connected to power.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    Try to restore it in disk mode.
    Putting iPod into disk mode.

  • HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

    Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
    Documents say
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
    But I can't see my iPad Mini in iTunes.
    And my  Ipad  (Settings, General, iTunes Wifi Sinc)  shows  a message :" Sync will resume when xxx(my PC with iTunes) is available "...
    Both are in the same network,
      Ipad mini is is plugged in to power
    . iTunes is open on the computer
    what can i Do ???

    Hi Skydiver119,  and tks for four interest.
    I have done exactly as you say, but it does not work for me.
    You indicated  " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
    I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
    I disconnect the wire,
    and my iPad disappears from my iTunes screen.
    in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
    So, I can not sync via wi-fi
    I appreciate if you can help me.

  • My ipod shows up in itunes, but does not show up on my pc as a drive

    my ipod show up in itunes - but does not show up on my pc as a drive
    cannot figure out why it now doesn't show up

    Maybe
    iOS: Unable to import photos to computer
    Did it show before?
    If you connect to another PC does the iPod show up in My Computer?
    Have you installed only camera or scanner programs on your computer?

  • I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

  • TS4079 Siri is not responding. All settings are the same as my wifes I4s. Her Siri works and my I5 does not.

    Siri is not responding. All settings are the same as my wifes I4s. Her Siri works and my I5 does not.  Any suggestions?

    I just cycled my phone completely off (30 sec) then back on again. It seamed to help, it's working now!!!

  • Hello ! The screen of my ipod is white and my coputer does not reconize it ! What can I do ?

    Hello ! The screen of my ipod is white and my coputer does not reconize it ! What can I do ?

    Try the white-screen topic here.
    iPod touch: Hardware troubleshooting
    If not successful, let the battery fully drain and then after charging for an hour try the applicible part of the article.

  • Wireless keyboard connected but does not work.

    My wireless numeric keypad is connected to the iMac, but does not work.  Wireless keyboard and mouse are OK.  Tried connecting/disconnecting and restarting the Mac to no avail.  Everything was fine yesterday.  Any suggestions?

    Try a SMC reset (could help, cannot hurt):
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Barry

  • When I click on a .docx document Firefox thinks it is binary and saves but does not open with MS Word - but it knows .doc is MS Word and opens it automatically

    When I click on a .docx document Firefox thinks it is binary and saves it but does not open with MS Word. But it knows .doc is MS Word and opens it automatically (this is the behavior I would like with .docx docs.) In preferences -- applications - it is just says "content type" is "microsoft word document" but doesn't give a way to choose .docx specifically. Is there another way to do this?
    Iam running Mac OS X 10.6.4 and Firefox 3.6.8 with MS Word Mac 2008

    Hi ,
    According to your description, my understanding is that you could not edit documents with Office client application in SharePoint 2010.
    Let’s do a troubleshooting about this issue:
    1. Make sure that you have installed Office application on your machine.
    2. Which explorer did you use for your SharePoint. Please test it with IE 10 32-bit, compare the result.
    3. Please try to reset IE, compare the result.
    4. Add your SharePoint site into Trusted site on your IE options.
    5. Make sure all add-ons related to SharePoint are enable, special for SharePoint OpenDocument Class and SharePointOpenXMLDocuments.
    6. Since you used OWA for your SharePoint site, please try to disable OWA, then open documents with client application, compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for

  • Print a document with mixed Legal/Lett​er paper with 1 tray and manual feed

    I have an HP Laserjet Pro MFP M521 with one paper tray. I need to print a document that has a mix of legal and letter size pages. Is there a way to set it up using the one tray and the manual feed so that it will print correctly?

  • Unable to open D3 NEF in CS3 (Mac) and CS2 (Win)

    I have installed the latest Camera Raw Update file (Mac OSX 10.5.3), but when I try to open a nef-file that was taken with my Nikon D3, CS3 complains about an invalid file type - ??? Opening the same file in Nikon NX works without a problem. A friend

  • Imac to Ipad Air

    I now have been able to load my photos from my IPad2 to my Imac - but now if I buy an Ipad Air how can I download those same photos to the new IPad?

  • Why doesn't Firefox completely uninstall ?

    Why does Firefox 22 on a Mac Os not completely uninstall? when I remove the application on the Mac by dragging the application to the garbage and then reinstall, my book marks are still present. Why? All applications should completely uninstall but F

  • Having a SP or Function return a set of rows ?

    Hi, I been looking through the documentation that came with PL/SQL and I am trying to figure out how to get a procedure or function to return the rows of a select statement. Would it have to be done using a Table function ?? I am trying to access the