Ipod (click 40g) recognized by windows, but not by itunes strange problem

Hey,
Since about two weeks my ipod is not recognized by itunes.
I suspect it started when i unplugged the ipod (accidentely) when the 'do not disconnect' sign was still on.
Since then every time i plug in my ipod, it is recognized by windows as plugged in hardware. When opening windows explorer, i can see my ipod, but clicking on it, to view its contents causes the explorer to jam. Itunes also does not recognize the ipod at all. IpodUpdater tends to be a little bit unpredictable about whether it will recognize the ipod.
i tried al the five R's. Resetting, reinstalling itunes and my ipod, retrying on a different computer, restarting, restoring.
My ipod itself seems to work fine. it sometimes jammed during a song, which never occured before. but now, since i restored my ipod, i don't have any music any more, so i can't test it.
When trying my ipod on a different computer, i managed to get it recognized on itunes once. but when i tried to copy music, the connection failed and itunes froze.
the sound my ipod makes is also a bit strange. when
i open ipodupdater, and the updater tries to connect to the ipod, the ipod seems to start up with a zooming (normal) sound, but then, after a second you hear a little ipod-cracklingsound, and it starts all over.
is there any suggestion at all about what i can do to try to
fix this myself
greetings
river

I have a very similar problem except that I have tried all the remedial steps but the last. I cannot get the ipod updater to recognise the ipod at all, A reset simply resets and the do not disconnect message comes back after a few seconds. Again, My Computer can see the ipod as a hard drive but it cannotb access it and this causes My Computer to stop responding. Grateful for any help.

Similar Messages

  • My ipod is recognized in windows but not in itunes. I ran the troubleshooter and followed all of the steps to fix it....itunes still does not recognize my ipod.  Anyone know how to fix this?

    My ipod is recognized in windows but not in itunes. It shows up in devices and gives me the ok to eject prompt, so I know that the connection is good. I ran the troubleshooter and did all the recommended fixes.  Hours and hours later, I still have the same problem. I uninstalled itunes and all its folders, restarted the apple device services and changed the drive letter. Checked my security settings and everything else I can think of. Does anyone know how to fix this?

    Did you remove all Apple related software including QuickTime, Safari, Software Update utility for Windows, etc using the exact instructions in this Apple support document?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Are you plugging the iPod into a high powered USB 2.0 port and not a USB or similar?  Have you tried different cables to help rule out a faulty or damaged cable? 
    Does it connect to iTunes okay on another PC or Mac?

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • IPod is recognized in Windows, but not in iTunes.

    Ive followed the support site on what to do if the iPod is recognized in Windows but not iTunes... but to no avail.
    ive had a 20GB photo thats been working o.k. (need to send it in) but now neither it nor my new 30GB Video will appear on iTunes... just in windows.... any suggestions? or should i just call up apple...
    p.s. i know its not the iPods cause they update fine on my sisters laptop...

    Does it say Cannot Mount iPod?
    Is the software on your computer up to date? You may want to try reinstalling it as well...
    iTunes
    iPod Updater
    Update iPod's Software
    Also, try right clicking on the iPod (in My Computer) and go to format. Does anything happen?
    btabz

  • Ipad recognized by windows but not in itunes

    When i connect my ipad to my windows 7 computer, only the computer recognizes the ipad. It does not show up in itunes. I have a different computer that does recognize it in itunes though.

    i have the same problem, i have windows vista and my itunes version is 10, my ipad was activated with my friends pc, it has itunes 9.2, i updated my ipad os to 3.1.2, and i need to synch it with this pc, help...

  • IPod Mini is recognized by Windows but Not iTunes

    my ipod mini is set to update automatically with itunes, but the other day it stopped. I was using iTunes 4 but upgraded to 6 yesterday, still no luck. My mini is not recognized by itunes. I then uninstalled the iPod updater and then reinstalled it. Then, when i reconnected the iPod, a box poped up and said "Mike's iPod" (calendar, contacts), but still nothing in iTunes.
    I tried to reset it, no luck
    Tried to upgrade iTunes, but ipod is still not recognized
    Tried uninstall & reinstall of Updater, no luck
    This has been going on for a week now. If anyone can help, PLEASE DO!!!
    Thanks!
    -Mike
      Windows XP  

    Tried here?
    http://docs.info.apple.com/article.html?artnum=93716

  • IPod nano recognized in Windows but not in iTunes

    My iTunes won't recognize my iPod. And this message always pop-up : iTunes cannot read the contents of the iPod nano.Please use the iPod Software Updater application to restore the iPod to factory settings.I read the manual, but I just can't find anything about restoring to factory settings !?!? I'm new to iPod and I'm begining to lose interest for my iPod nano !!!!

    Found another, this one seems to be just right for you!
    iPod appears in Windows Explorer but does not appear in iTunes
    Just for a heads up, try typing into the search field the error message you get, sometimes it has an article on it.

  • My iPod is being recognized by Windows, but not iTunes!!!

    The Subject says it all....

    Do a reset (make sure you see the Apple logo) while it's plugged in to the computer.
    That's the 'starting place'.
    And you're not doing a reset if you don't see the Apple logo, BTW. It's not easy to do. If you don't know how to do a reset, you can find directions by doing a quick search of this forum, or doing a quick review of the manual that came with your iPod.

  • IPod shuffle recognized in windows, but not in iTunes? Anybody please help!

    I need help... my BRAND NEW shuffle (4th gen) will not come up in the devices list... iTunes will not recognize anything is plugged in even though it shows on the H drive in windows....

    Have you checked that Windows has downloaded the driver?

  • Shuffle recognized in windows but not in itunes

    my new shuffle 4GB is recognized in Computer in Vista but is not recognized by itunes my older Ipod Nano has no such problems I have been able to copy 104 songs around 470 MB to the shuffle by using windows explorer but now when i try to add more this way i get an error message that the disk is write protected the songs added play fine

    Have you checked that Windows has downloaded the driver?

  • ITouch recognized in windows but not in iTunes

    My wife gave me he itouch that she used on her iMac.  But having problems with it on my PC.  My old iPod works just fine and shows up in iTunes.
    But when I connect the iTouch is does not show up in itunes.  At first it would not even show up the control panel.  I fixed that but deleting the serial bus controller driver then pluging the itouch back in and reloading the drivers.
    But it will not show up in iTunes.  I have tried all the Apple help guides.  Reinstalled itunes after deleting all itune related files.  When I open itunes it will not show and freezes itunes and have to close it with the task manager.  Some times it will not even let me open itunes and I have to uninstall and reinstall itunes.
    I did a restore on the wife's iMac but still a no go.
    I have been working with this for hours and have tried all kinds of fixes suggested by Apple and different forums.  You all are my last, best hope.
    Harry

    Error (-1)
    Try on another computer
    Also see:
    iOS: If you can't back up or restore from a backup in iTunes
    Then see:
    -1 error
    -1 error too
    If still problem  that means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Ipod is recognized by windows but not itunes

    i got a 4gb nano and when i connect my ipod to my computer it dosnt show up in itunes i reinstalled everything but it still wont work

    hiya!
    okay, we'd better check through the usual suspects:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod shows up in Windows but not in iTunes
    love, b

  • Fix for "iPod shows up in Windows but not in iTunes"

    This is a possible fix for those with the "iPod shows up in Windows but not in iTunes" problem. This also fixes those have the update/restore problem (ipod disconnects after clicking update/restore in itunes)
    SOLUTION
    SOLUTION
    I had the exact same problems before, iTunes doesn’t recognize iPod after connecting it, I had to use the restart iPod Service method to get it working.
    I tried this on my second computer and it worked perfectly, iTunes recognizes iPod every time I plug it in.
    I compared the process/services opened in both computers, and I turned on some services which were previously on disable(excluding iPod Service). Unfortunately I forgot which services it was, so I took some screenshots and compare these with your services.
    After modifying the services, I tried plug and unplug the iPod several times without closing iTunes, iPod was instantly recognized by iTunes every time!
    I attached the links to screenshots of my automatic services and manual services, ignore the service if its not on your list!
    For those don’t know how to open Services, Start -> Run -> “services.msc”
    http://img214.imageshack.us/img214/6200/automaticservicesec2.jpg
    http://img216.imageshack.us/img216/3700/manualservicesce3.jpg
    -If anyone know the specific services required to be turned on, please reply in this thread.
    -I am using the 2nd Gen Nano 2GB version with latest iTunes.
    IBM T43 Windows XP Pro
    IBM T43 Windows XP Pro

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

  • IPod Nano IS recognized by windows but itunes doesn't...

    I have recently bought an ipod nano and i've installed the software and itunes and everything...when i plug the ipod into the usb drive, it IS recognized by the computer but not by Itunes....i cannot transfer my songs onto my ipod and it hasnt asked me for a name for my ipod like it did with my 2nd generation ipod.......can anyone help?

    hiya!
    okay, we'd better check on the usual suspects.
    first have a look inside your "My Computer". is the ipod showing up in there?
    if it isn't, see:
    Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
    iPod missing in "My Computer" or in iTunes on Windows
    if it is, see:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod shows up in Windows but not in iTunes
    love, b

Maybe you are looking for

  • Advance payment & purchase order

    i need purchase order wise advance payment can u tell me what are the config steps in sap please explain briefly

  • How to Play a sample sound using Java

    Hi, I have an mp3 music files in database. When a user chooses a particular button, all the songs are fetched from the database. I have two buttons namely, 'Buy' and 'Play Sample'. If I click the 'Play Sample' button, a sample of the song has to be p

  • Airport Extreme setup in my class... HELP

    Ok so I've had this issue before & fixed it but it always takes forever. I'm setting up a brand new basestation on a macbook, ran the install software got the green light but I can't connect to the internet. Have ran diagnostics etc but won't work. I

  • NANO WILL NOT TURN OFF!!

    Please help - Everything works fine with the Nano when it is connected to laptop. When not connected, all works but it can not be turned off - only put in pause. If I connect back to laptop, I can turn it off just fine. I have reset, restored, etc. w

  • Budget Exceed error while settlement in PS T-Code CJ88

    Hi Guru's, I have created structure upto 6 level and i have done planning and budgeting at 6th level only, and actual cost is also posted at 6th level. When i am setteling that amount  at 5th level WBS using T-Code CJ88 then it is giving Budget excee