Ipod Color (60gig Photo) - Unexplaned Shutdowns

Im a sad panda. Just this weekend, my iPod is acting goofy, and its killing me. Heres the deal:
Any movement of the iPod and the screen will fade out to grey (then fade out all together) then i will get the Apple logo as it reboots. Even if the Apple logo is displayed, and i move it, it will fade, then come back up. This does NOT happen if the hold switch is turned on. I will even get the Low Battery Icon when this happens, but i know for a fact the battery is full (unless that icon is not reading correctly) It seems like it has an internal short, which makes me want to cry cause i am supposed to be leaving on a road trip soon, and this is how i carry all my music. I could just listen to it with the Hold Switch on, but once i turn it off...there it goes: fade out. Whats up, peeps? Give me some love over here!
Cheers-
S
XP Windows XP
XP Windows XP
XP   Windows XP  

Thanks for the advice...It has been at least 18 months. I just went and looked at it. I had the hold switch over to "hold", and it had been charging overnight. The screen said "charged" with the full battery icon. I switched it off of "hold" and boom, fade out. It was still plugged in. Im going to go have someone look at it today. Ill let yall know what happens. Stay tuned!
S

Similar Messages

  • Photos on 60gb iPOD color

    When I try to upload pictures to my new 60gb iPOD color, and maybe I'm not doing it right, but I have iTunes open, then I go to iTunes, then Preferences, then Photo, then I'll tell it to "Synchronize photos from iPhoto and select the roll I want to upload, then with my iPOD plugged in, I'll get a message saying, "Preferences were not saved for the iPOD(my ipod name)because it could not be found".
    What am I doing wrong?
    Thanks!

    This is done

  • Sync multiple lobraries with iPod color 60GB

    I posted this issue in the iPod forum, but received no advice. Hopefully someone here can help:
    I have over 25,000 photos and use several iPhoto libraries to manage and organize them. One library lives on my Powerbook 17" hard drive and the others are on external FW800 drives.
    Because I take so many photos away from home, I usually import photos to my Powerbook library temporarily, then transfer them to one of the other libraries I have on the external HDs in my studio and delete them from the PB.
    One library consists only of photos I have taken for a client, another contains family photos, a third one is abstract and artistic photos, a fourth is all antique cars, a fifth all nudes, etc...
    I would like to be able to include some photo albums from each library on my 60G iPod Color. Is there a way to do this without combining all of my photos into the same library?
    I guess what I am asking is: is it possible to get photos from multiple libraries on the same iPod at the same time? if so, how?
    If not, is there a way for me to create an iPhoto library that consists of photo aliases (I don't want to import duplicates of the photos to include on the iPod) and then use that library to sync with the iPod?

    HI Rich, an ipod can only be associated with one iPhoto Library. You can however have it sync photos from a folder on your hard drive. this would entail sharing 'exporting images from each of your libraries and putting them all in a folder on one computer. Then set up the iPod preferences in iTunes to use this folder for the photos.
    Lori

  • IPOD Color- Corrupted- restored- black/white menu+not working (WinXP)

    I got an iPOD Color Display last year, few days ago, it started going nuts. Windows were not recognizing etc.
    After the restart-reboot-restore it has a Black/White GUI and still windows can not recognize it. Windows say that it is a generic USB hard drivem iTunes say that it needs to be restored (and after every restoration, it needs to be restored again, and it is not working anymore, even if it is alive).
    iPOD's screen shows the exclamation mark over an envelope.
    HELP!!!
    Is there any advance utility, which for example, could make iPOD an image of a filesystem, in order to everything be overwritten (factory settings)

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Asking about Ipod color !

    Dear, all reader
    I am curious about New Ipod (color). I have many question in my mind. Well, would you please help me to figure out.
    Thanks
    1. Ipod color is the Ipod photo (Can it display the photo?)
    2. Can I use it either mac or pc?
    3. Can I transfer any files from my pc to Ipod? (Like a USB drive) easy?
    4. Can I directly transfer the picture from my digital camera to Ipod?
    I think that's all I need to know. Please let me know about that. Thank you very much and appreciated.
    Regards,
    B-able
    4.

    I'm not too sure about the camera connecter, read up about it and see what it says. The one I've been looking into is a belkin or something, and you take out your digital camera's chip, then place it in a special slot made for it, connect it to your iPod photo in the same place you would your usb cable, and they'll download straight to your iPod.

  • Sync iPod color after computer crash and loss of music

    How do I sync my older iPod color now with a new windows vista computer and not lose the music already on the iPod? the older hard disc crashed and was not recoverable so all of the downloaded music over 2000 songs were lost but are still on the iPod. How can I connect it to the newer computer without losing all of the music that is now on it. I have new music on the newer computer I would like to add but have been afraid to connect it in fear of losing all of my music.

    Hello mrsphilly,
    And welcome to Apple Discussions!
    There are several ways you can pull the music off your iPod and onto iTunes. The first link below provides step-by-step instructions for the direct method if you have a PC as well as a few third party applications (for both the Mac and PC) if you choose to go that route instead. You can also do a simple Google search for "copy music from iPod to computer" and you should receive a number of sites that can help you out.
    Just make sure that when you have your iPod plugged into your computer, that you don't hit "Erase and Sync" before completing the task of copying your music over.
    Also, if you have any purchased music, you will probably have to re-authorize your computer by heading to the Store drop down menu and choosing "Authorize computer."
    [5 Ways to Copy Music OFF your iPod and onto iTunes|http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipo d-windows-mac-os-x>
    Here are a few more helpful sites.
    [Copying Content from your iPod to your Computer - The Definitive Guide|http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipo d-to-computer]
    Or
    [How to copy songs your iPod to your PC|http://lifehacker.com/software/ipod/how-to-copy-songs-from-your-ipod-to-your -pc-105256.php]
    Also, here is an article for the direct method that is for both Windows Vista and XP.
    http://ipodtips-tricks.blogspot.com/2008/10/howto-transfer-music-from-ipodto-itu nes.html
    Hope this helps.
    B-rock

  • Is my iPod Color (60GB) dead?

    Hi all,
    I don't remember how it began but some day all songs on my iPod seemed to be gone. However, they still were there when I looked on it on the Unix command line (the folders named "Fxx" had my music files with cryptic names).
    Obviously the database was corrupt. Unfortunately, I wasn't able to rebuild it, even the tool "TuneTech for iPod" couldn't help.
    So I finally agreed on completely resetting it (from within iTunes 7.1) and losing all my songs, ratings, playlists etc.
    But things even get worse. Now when I connect the iPod (via FireWire or USB) to my PowerMac G5 (10.4.9) or MacBook Pro (10.4.8) I have to wait almost 10 minutes until the iPod gets mounted. During this time iTunes doesn't react to user interaction.
    When the iPod finally appears I can drag-n-drop songs onto it. But even a single song can last several minutes to be copied to the iPod. Sometimes, when I drag-n-drop about 100 files onto it, iTunes thinks firt for app. 5 minutes before the copy process starts.
    The copy process itself sometimes hangs for another 5 minutes or so until it eventually finishes.
    But the most awkward thing is: when I get a chance to unmount the iPod (eject button) -- which lasts for another 5 to 10 minutes -- most of the time the song list on the iPod is EMPTY!
    The About screen says that there are 0 songs on the iPod BUT there are (e.g.) 50.4 GB of 55.9 GB (don't know the exact figures now) available.
    So there ARE files on the iPod but the database seems to be corrupt again. And I have NO idea what to do about this.
    Anybody out there who can help?
    Thanks,
    Stefan.
    PowerMac G5 Dual 2.7GHz, MacBook Pro 2GHz   Mac OS X (10.4.9)   PM: 2.5GB RAM, GeForce 6800 Ultra DDL

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Help with ipod color display

    Tenog un ipod color display de 60Gb de capacidad, recientemente le hice un software update y la capacidad del ipod cambio a 18.1Gb y no eh podido cambiar la capacidad. Ya intente restaurarlo, hacerle otro update, darle format y no sirve nada. Que puedo hacer?

    Tenog un ipod color display de 60Gb de capacidad,
    recientemente le hice un software update y la
    capacidad del ipod cambio a 18.1Gb y no eh podido
    cambiar la capacidad. Ya intente restaurarlo, hacerle
    otro update, darle format y no sirve nada. Que puedo
    hacer?
    Lo siento, mi espanol no es muy bueno.
    Puede hablar ingles?
    El articulo que puede aydarle no esta en espanol, pero:
    http://docs.info.apple.com/article.html?artnum=93499
    CG

  • Ipod touch 3.1.3 shutdown

    Why did my ipod touch 3.1.3 shutdown & will not come back on, though it's been on charger for days.

    Try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

  • When exporting photo to my pictures folder it shows up as a soft color & no photo..Please help

    When exporting my edited pictures to a folder in m Pictures it goes as a blank soft color but no photo. It looks like a tiny dot and when you open it, it is a soft color.. Please help!

    I am trying to send as attachement. I have tried to screen shot but must not have a clue how to!  Is there a number someone can walk me through this.. or if you could tell me how to screen shot it. I am trying the print screen but not working. I have never done on  a computer before. My system is Dell Pentium Dual Core [email protected]   4.00GB  64 Bit Windows Vista. I tried to download a trial of LR4 so I could get some work done until prob fixed but it tells me my system not compatible. I am thinking of creative cloud but will this work with my system. I use LR for 100% of my editing but have been doing other things (newborns) where I feel I need CS6. If you could let me know what I need to do to run the new LR and CS6 that would be great. (Really need a computer class)! Thanks
    Victoria Bampton <[email protected]> wrote:
    Victoria Bampton http://forums.adobe.com/people/Victoria_Bampton created the discussion
    "Re: When exporting photo to my pictures folder it shows up as a soft color & no photo..Please help"
    To view the discussion, visit: http://forums.adobe.com/message/5584806#5584806

  • Using iPod to transfer photos

    I'm using iPod to transfer photos from one Mac to another. They were uploaded from iPhoto 4.03 following directions, and downloaded to the second computer with iPhoto '08 (7.1.5) using iPod as an external drive. However only 23 photos out of hundreds downloaded. I get the message, "The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)." These files are listed:
    /Volumes/name/Photos/Thumbs
    /Volumes/name/Photos/Photo Database
    I'm assuming it's the database file that's the problem, but why would some photos download and not the rest? Opening the Photos folder in the iPod icon, there are only two items. The Photo Database is shown as a Unix file. There are only six thumbs in that folder, and they are all Unix as well.
    I posted this in iPod discussion, but hoped an iPhoto expert might also help me.
    Any suggestions? Thanks!

    What's the HD feature? I don't have the iPod synced to iPhoto in the second computer; I have it on Manually manage music and videos.
    There's a possibility that it did sync in the first computer before I checked that option, but no photos uploaded until I did it manually, so it doesn't seem so. Also, the icon appeared on the desktop and that doesn't happen if it's synced, does it?
    It definitely did not sync in the second one as it was already checked when I connected it.
    And I keep going back to, why did some photos import and not the rest?
    Thanks for sticking with me.

  • How to avoid white color in photo taking in iphone 4s at night with flash?

    how to avoid white color in photo taking in iphone 4s at night with flash?

    HI Lisa91,
    Here is a link to a post about the same problem you are having and the same printer. You may find the posts helpful as some were able to find a solution. Post number 6 and number 12 specifically have found solutions that worked for them. Hope this helps some.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Can new iPod Touch transfer photos from PowerBook G4 with OS 10.5.8?

    Can new iPod Touch transfer photos from PowerBook G4 with OS 10.5.8?

    iCloud really has nothing to do with it since it works with Ubuntu. It may be due with the Trust
    iOS: 'Trust This Computer' alert
    Which came with iOS 6 or 7

  • HT201317 Why did my iPod automatically upload photos from another iPod?

    I stumbled upon "my photo stream" on my iPod and I found a lot of pictures not from my iPod and few from my iPod in the photo stream. I didn't know most of the people in the photos and some of the pictures were very crude. I'm just wondering how my iPod downloaded a bunch of photos that's were not mine onto my iPod and mixed them in with some of my photos.

    Try download iPod Disk or senuti. These are very helpful programs that allow you to recover files from your iPod. If you really don't want your iPod to sync, open Activity Monitor, (Located in the applications folder in the utilities folder or spotlight search) and find iTunes helper. Click force quit, then open up accounts in system preferences, and click the - button for iTunes helper.
    Hope this helps

  • Ipod nano and photos acting all weird ?

    i have an ipod nano im having trouble with the photos...ok i know how to put them on and all...i wont to be able to put a photo on my ipod then be able to delet it off my pc and still be on my nano but its not....???? it delets the photos from my nano as soon as i delet it from my pc and if i unplug it then delet it from my pc when i add new photos to my nano the old ones are gone..omg i dont think this will make sence to you hopefully it does thank you so much for you're help if you could help me in any way i would apreciate it.
    shannon. .

    When you delete photos that are on your nano from your computer with your nano connected or connect it after deleting photos, the photos will be automatically removed from the iPod, since the photos are no longer in the folder that they were in the last time the iPod synced with the computer.
    The problem with adding new photos sounds like it it caused by you selecting a new folder of photos to sync from each time you connect. For the old photos to stay on the Nano, you must use the same folder to sync new ones each time.
    Just a note, I find it easiest to create a folder in "My Pictures" called something like "iPod Photo's". I then copy all the photos that I want on my iPod into this folder, and set the iPod up to sync from this folder. Photos can be deleted by simply removing the photo from this new folder, while it can still be on your computer main photo folder.

Maybe you are looking for

  • How do I get a transparent background in my Illustrator file?

    I'm relatively new to Illustrator, (I'm working in CS4) and created a corporate logo for one of my clients.  When I place the logo into Photoshop or InDesign, the logo is in a white box.  How can I make the background transparent in the original Illu

  • Sales order, stock transfer same copmany code

    Dear All, Busienss Scenario: Sales order needs to be raised in the Master Distribution Center (MDC) but the goods need to first reach the City Distribution Centre (CDC)and then be delivered to the customer. Here the MDC and CDC belong to the same com

  • Drill Down in Crystal Reports

    Gurus,        I am trying to add drill down to my Crystal Report, I know this can be achieved by using Hyperlink but the button for drill down is disabled. How can I enable this achieve the drill down function. Please find attach file for your convin

  • Safari no longer printing to Xerox Phaser

    This week, after some time of working well, safari stopped printing to my Xerox Phaser 860. The job seems to spool, but the printer doesn't print. However, pages print as they should in Firefox and Explorer. Has this been reported before?

  • G/L account settlement for AuC

    Hello everybody, I´m trying to settle an Asset under construction to a G/L account that is not a Cost element (a balance sheet account). The problem is that the Profit Center is not being assigned to the FI document. The system doesn´t take it from t