IPod completely blanks out!!

My iPod Nano that I got in 2007 has been working completely fine until today, when I went to turn it on and nothing happened. I plugged it into the computer, which wouldnt regonize it at first, then after about 10 minutes told me that my iPod had been corrupted and needed to be reformatted. I clicked to reformat it, but it did nothing...any help??

Thanks.
I did the whole restore thing, and it showed no data on my iPod, but when I went to load songs onto it, it gave me an error message (something about a write error? i cant remember what it was exactly).
I ended up just unplugging the iPod, and when i tried to plug it in again, Windows recognizes it, but not iTunes.
I still have a few days left until my 1 year waranty is up (i think) so i might just try to send it in to get repaired. any advice on that?

Similar Messages

  • Ipod completely blank and making wierd noises

    My ipod has always worked fine until I started using an itrip, after that, I try to connect it to my computer using my USB connector, as I have many many times and it wont respond. Itunes says I have no Ipod connected, it wont charge, when I connect it to my computer my ipod just stays black, nothing at all, no reponse, not to mention the wierd buzzing noise when I have it plugged in. PLEASE PLEASE PLEASE HELP, I CANT LIVE WITHOUT THIS THING!!!!!!!!!!!!!!!!!!!

    I tried that as well but the screen just went blank again. Then randomly, it says connect to power and even so, it still says connect to power. Its barely a year old.

  • Ipod completely blank and wont respond to anything. what should i do? whats wrong?

    My iPod fell in water a few months ago and I decided to take it to the authorised dealer in my city, Nairobi. They told me they couldnt fix it. Today, I connected it into my laptop and it said 'Charging, Please Wait...' so i did until the apple logo appeared with the light behind. Later on, it went off and my laptop has really tried to restart it, but it gives me these random errors (a different one each time) I really need it back. Please help!

    I tried that as well but the screen just went blank again. Then randomly, it says connect to power and even so, it still says connect to power. Its barely a year old.

  • My iPod completely freaked out...

    Last week, my iPod froze up on me a couple times. The first time, i was able to fix it... sort of. When I went to listen to it again, it froze after a few songs. Since then, i've tried a bunch of things on the support pages here, but nothing was working.
    I've apparantly restored my iPod, as there is no longer music loaded onto it. I was having a problem w/ my iTunes reading my iPod, so i re-installed iTunes and all that fun stuff, and it seems to be working... for now.
    The problem right now is, when i went to put my music back on, my iPod shows as having 22GB of space being used up aleady, but there is no music back on there yet.
    Can anyone help me out? Thanks!

    Thanks.
    I did the whole restore thing, and it showed no data on my iPod, but when I went to load songs onto it, it gave me an error message (something about a write error? i cant remember what it was exactly).
    I ended up just unplugging the iPod, and when i tried to plug it in again, Windows recognizes it, but not iTunes.
    I still have a few days left until my 1 year waranty is up (i think) so i might just try to send it in to get repaired. any advice on that?

  • Ipod completely blank

    My ipod will not turn on anymore. This happened thirty minutes ago when i was in my car. I didn't drop it, didn't spill water, nothing happened that could've made it stop. itunes still recognizes the ipod when its connected, though. How do i get it working again?

    I believe the reason why your iPod says "Do Not Disconnect" is because it's possibly trying to make a connection to your computer, or it's updating itself. What does iTunes say while your iPod says that message?

  • What do i do if my ipod's screen blanks out and wont get off the apple logo?

    what do i do if my ipod screen blanks out and wont get off the apple logo screen what do i do i need help asap!!!!!!!!!!!!!!!!!!!!

    See Here...
    iOS: Not responding or does not turn on
    Try this First... You will not lose ant data...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    If that does not work... try letting the battery fully drain.
    Then Charge for an Hour and try the suggestions again.

  • Blank out Display?

    Hi there!
    When I am listening to music on my notebook, I do not really need the display. So I was currently thinking about turning it off. Is there an easy way to completely blank out the display? I am running a Zepot Znote 6214w with an nvidia7600 with the latest drivers installed.
    thx in advance
    armin

    This does the trick for me. Immediately turns screen back on mouse or key input.
    xset dpms force off

  • IPod Nano (2nd Generation) Screen Is Completely Blank

    Hi,
    When I tried turning on my iPod Nano, it didn't work. The screen was still black and it wouldn't turn on. So I tried toggling the hold button and pressing the center and menu buttons simulatneously but that wouldn't work either. A few nights ago I had accidentally dropped my iPod into the sink and everything but the forward button was working fine. I'm wondering if that has something to do with my iPod not working. It was working perfectly fine up until now..
    Please help.
    Thanks

    Hi, it seems as if you are having the same problem with yours that I am having with mine. My screen is completely blank and my ipod doesnt turn on or anything not even when I hook it to the computer. I have reinstalled everything ad still nothing. I have toggled with it and still nothing and I am getting very annoyed lol. It doesnt even come up on itunes either. I havent dropped in water or anything. Last I knew the battery went dead and something about a corrupted file, while i tried charging it came up. It has worked fine and just today it stopped wowrking and I dont know what to do and hoping someone can help me out.

  • My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low.

    My WiFi is not working on my ipod touch third gen. The wifi option in setting is blanked out so i am unabole to select it. I have tried restored it and resetting network connections. Also the battery life is very low. How do i fix this????????????

    If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • When turning the Ipod on the screen is completely blank with lines

    When I turn my Ipod on the ipod is completely blank with lines up and down the screen and when turning it on it should have the main menu with the songs and other information. How do I fix this? The ipod serial number is YM715WZCX9B. The ipod color is red. It is an ipod nano 2nd generation. Hope you email me back as soon as possible.

    Mine is doing someting like that but the screen is half black then there are lines and then it white. Any ideas? I've tried to restore that didn't help...
    Help me poor Ipod

  • I recently just dropped my iPhone 5c the screen is blank and will not turn on siri works but i cant see anything on my screen it is pitch black and the screen is completely popped out. what should i do?

    I recently just dropped my iPhone 5c, the screen is blank and it will not turn on (pitch black until i press lock button then it turns a little blue). siri works if i hold down the button but the screen is still pitch black. the screen is also completely popped out. What should i do? what do you think apple will do?

    take it to Apple and have the screen replaced.

  • The round button that allows me to get out of an app or to move or delete apps has stopped working.  Once I am in an app the only way to get out of the app is to power off my ipod completely.  Help!

    The round button that allows me to get out of an app or to move or delete an app has stopped working.  Once I am in an app, the only way to get out of it is to power off my ipod completely.  Help!

    Try this previous discussion:
            FIX for iPod Touch Home Button: Apple Support Communities

  • I have a bad idea I might of blown up mu iPod touch 5th generation battery by a mistake, please any suggestions on how i could try and turn it on? It is completely blank and it had full charge before it shut off. In need of desperate help :-(

    I have a bad idea I might of blown up my iPod touch 5th generation battery by a mistake, please any suggestions on how i could try and turn it on? It is completely blank and it had full charge before it shut off. In need of desperate help :-(
    Would be very grateful if someone could get back to me
    Thank you very much

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1476 I am in Greece and my iphone has completely blacked out. I have had it on charge in my room but nothing.  screen completely blank. any ideas?

    I am in Greece and my iphone has completely blacked out. I have had it on charge in my room but nothing.  screen completely blank. any ideas?

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062

  • My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.

    Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.
    Any tips are very much appreciated.

    Place the iPod Touch into DFU mode.  This will be similar to what the factory would do to install the iOS onto new iOS devices.
    Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
    To place your iOS device into DFU mode.
    First connect you iOS device to you computer.
    Open iTunes if not already open
    Now turn off your iOS device using the power swipe.
    Press the home and sleep button on your iOS device for 10 seconds.
    Release the sleep button but carry on holding down the home button.  For another 10 seconds.
    Your iOS device should now be on DFU.  Click on restore and iTunes will download the latest iOS for your device.
    Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it)  Or go into an Apple Store.

Maybe you are looking for

  • Write xmp sidecar files without need to export masters - script

    I've written a script to write xmp sidecar files for referenced and online images (the 2 conditions in the script) of the selected images. I looked for a while at system events and other stuff to be able to write the xmp file, but i'm not a programme

  • How to connect to AVID interface

    I am using Avid interface and would like to connect with Logic but I am lost, can any one help with this please? thanks

  • How to authenticate using Active directory!

    Hi all! at present im using a code given below, its working fine! currently we are using mixed mode active directory! we are going to migrate that to Native mode! import java.util.Properties; import javax.naming.*; import javax.naming.directory.*; im

  • Problem saving an image to disk - sometimes its black??

    Hi i'm trying to create a thumbnail of an image and save it to disk using Image and Graphics2D. The problem i'm having is that sometimes when i save the image its blank\black, it seems totally random in doing this i.e. it will work find one time and

  • JNDI lookup with DNS

    Hi all, we are using 2 weblogic 5.1 servers (not clustered) for our load balancing solution. In our client applications, we use a hostname against a DNS for the JNDI lookups for our RMI objects deployed on the 2 weblogic servers. Ideally, a round-rob