Ipod connected but not recognized

When I connect my ipod it charges but is not recognized by itunes. Usually when I have something connected to the usb port it has a little icon on my toolbar on the bottom of my screen...that doesn't happen with this. For some reason I think I selected something that made it not be recognized by itunes or my computer.
ipod color screen   Windows XP  

hi bunchofbums! (how many of you are there?)
if the ipod isn't being recognised by Windows, let's check on this issue first:
Strange iPod behavior when Windows confuses iPod with network drive
... but if no joy with that, let's steadily work through this document:
Your Windows PC doesn't recognize iPod
keep us posted.
love, b

Similar Messages

  • My ipod touch is connected but not recognized by my computer or by itunes

    my ipod touch is connected to my computer but is not recognized by either my computer or by itunes (but my old ipod is recognized by itunes) - why can i not get it to be read? (it charges, so i know the usb cable works)

    Did you try placing it in recovery mode:
    iPhone and iPod touch: Unable to update or restore
    In DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Ipod connected, but not recognised on computer?

    My ipod is connected to my computer, but my computer does not recognise it nor will it sync and updated the music i've bought on my ipod to itunes. i've updated everything, and done everything i think possible. my ipod's sync automatically is greyed out because it is waiting for "hp" then it gives a ton of numbers then it says till it is available. help..?

    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • 3G iPod charges but not recognized over Firewire

    My 3G iPod is not recognized at all by Windows when I connect it by Firewire. I have tried 3 Firewire ports on my PC (2 nForce 4 onboard, one on a PCI Audigy 2ZS). I have the latest drivers, updates, etc. I have no known spyware, viruses etc. I have tried it on my old iBook G4 with OS X 10.3 too (not all software is current on there because I can't get it on the Internet right now, but for the same reason it shouldn't have any spyware or viruses either!) and have the same problems.
    It does not show up as a hard drive or in device manager. iTunes says that no iPod is connected. iPod Updater says to connect an iPod. The iPod does not show the do not disconnect message.
    I have tried restarting the iPod many times, as well as putting it into disk mode, all to no avail. It charges and plays my music fine, but neither the iPod nor the computer recognize that they are connected.
    I don't think there is a problem with the Firewire cable but I don't have another one to try. I haven't seen solutions online for problems like this except one person who was told that Firewire doesn't work any more but USB is fine. I am going to see if I can get a USB cable to try it with and if that works I suppose I'm happy - I was planning on selling it soon and most people would want USB anyway.
    I did find one site describing this problem and offering to fix it with a new logic board for just(!) £70 but I doubt I can sell it for much more that so it hardly seems worth it. Apple's service fee will definitely be more than the resale value!
      Windows XP Pro  

    I tried everything I could find that sounded relevant already. I think I had that 2006-01-10 firmware on there but the problem didn't happen straight after updating so I didn't think that was the problem at first. I couldn't downgrade the firmware because the computer couldn't see the iPod!
    I've now bought a third party USB cable and it works perfectly. Therefore the problem seems to be either with the Firewire lead (which works only for charging) or something in the iPod hardware. I'll leave this open in case anyone actually knows why Firewire won't work.
    Can you suggest the best firmware to restore it with before I sell it if 2006-01-10 is so problematic? It seems to work fine for me but it would be better to play it safe I suppose.

  • Ipod Connected but not detected !!please help!!!

    Hello! so ive come to my last resort in order to figure this problem out. The basic problem is that itunes does not recognize my 5th generation ipod. Ok here are the details:
    -running windows XP professional with all security updates(i.e service pack 3)
    -tried the 5 R's
    -If another ipod is connected to my computer it works perfectly
    -everything is up to date
    -Cord is in working conditions
    -when my ipod is connected to other computers it works
    -I just recently re-installed Windows XP completley(new partition and everything)
    -USB hubs work fine due to other ipods working fine on my computer when connected
    -I have formatted my ipod, uninstalled everything that has to do with Apple and quicktime, from temporary files to program files etc.. then i re installed everything and nothing works
    -Ipod shows up in my computer and i am able to go into it but it will not pop up in itunes.
    -when the ipod is plugged in and itunes is up it is frozen for a while until the ipod is unplugged then everything returns to normal.
    i think thats all the details i can think of at the momment.
    please help!, ive tried almost everything i can think of and read, but maybe i missed something.

    Still sounds like a USB problem to me. Have you tried the usb ports on the BACK of the computer?

  • Ipod charges but not recognized by computer or itunes

    When I plug my 5th gen ipod into my computer it charges up but it isn't recognized in the computer or itunes. The ipod has worked in the past and I just updated itunes to the latest version but it still doesn't work.Can anyone help?

    You might check out this document:
    http://docs.info.apple.com/article.html?artnum=61711
    Diane Wordsmith

  • Webcam connected but not recognized by eMac

    I realized that this is probably not an eMac specific problem,
    so hope that re-posting my question in the general Tiger forum will help finding solution:
    This is a tricky one, since I am helping mom from across the globe
    to set up a Logitech webcam on an older eMac (OS X Tiger)...
    Here's what she did so far:
    downloaded and installed Logitech Control Center software,
    connected QuickCam E1000 & headset via USB port.
    Logitech software show in System Preferences,
    headset sound works via Skype,
    but Logitech and Skype softwares cannot see the camera.
    Logitech's support site is not of much help,
    maybe someone here has an idea?

    Do other USB devices work in the same USB port?
    I assume you are plugged into a USB 1.1 port on the eMac. Does the webcam require USB 2.0?
    Look at these links.
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • My 5th gen nano will not sync win 7 .says connected but not show in itunes. driver is updated ,working properly ....help

    my 5th gen nano ,has updated driver ,working properly. ipod connected but not showing in itunes ?

    By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

  • IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

    My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error.  My iPod is now having a connect to iTune screen.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1602

  • My ipod touch is not recognized on itunes and will not turn on or give me the battery sign. I have tried toubleshooting it by holding down the home button and the sleep/wake button, but it doesn't work. What do I do to fix it?

    My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?

    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591

  • My Ipod Classic is not recognized by my PC but is recognized on my laptop.

    Hardware: Ipod Classic 32
    Software: Windows XP Pro, Service Pack 3
    Issue:
    If I plug the ipod to any USB on the pc I get a notice that says "USB device not recognized"- If I go to the drivers and uninstall, and then reset, it will recognize the unit- briefly flashing the red "do not disconnect" sign and then do the same thing stateing that it's unrecognized.
    However, If I plug the ipod to one of the laptops, there is no issue at all. (I've done the disc mode as well)
    I went so far as to uninstall all the drivers and reset them all and then the ipod was recognized but my keyboard was disabled!  So, I reset again and everything works but the ipod is still not recognized.
    Additionally, I have a slot where I would plug a camera memory card and it also stopped working around the same time the ipod did. The odd part is that if I plug the camera via usb, I can upload pics with no issue- just can't use the slot for the memeory card.
    I was thinking that this is an issue with the driver but it seems intermittent as I have left the ipod plugged a for a while a few times and sometimes it will just start working out of the blue.
    I am not sure what else I can do. Anyone have any ideas?

    Did you completely remove all Apple related software from your system and re-installing it from scratch using the exact instructions in this Apple support document?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    B-rock

  • ITunes crashes on exit when iPod is connected, but not otherwise?

    I had this problem ever since I installed iTunes 7...
    It occoured as soon as I installed the new verison while still using my old 4gb first gen. iPod nano.
    Now I just recently bought a new second generation nano, and still have the same problem.
    And the issue is, Whenever I close iTunes while my iPod is connected (but not being updated), i get the message that "iTunes.exe has preformed an illegal operation and will be closed".
    Though I just noticed that if I disconnect the iPod before closing itunes, it closes fine and normally.
    I Have tried to solve it by following toturials for uninstalling both just iTunes, and iTunes + QuickTime at the same time, and preform separate installations after cleaning the temp. folder and restarting. None of it has helped me solve the problem
    -And I have lived with ifor a while, but it is getting really annoying if I am sititng on my computer and jsut close iTunes, without disonnecting my iPod, to run another program using sound or a lot of system resources. And thne each time get the error-message that "iTunes preformed an illegal operation and..."
    Anytihng that can be done? -I run NO plugins for the record, and the iPod is connected by USB cable (seeing it is a Nano)
    Anything anyne can suggest that I'd do, then please tell.
    -Or if anyone need to know more then please ask.
    Bigtower III Pentium 4   Windows XP Pro   [4gb Ipod nano. 2nd. gen.][Itunes 7.0.2.16]
    Bigtower III Pentium 4   Windows XP Pro  

    Hi, Im sorry just to add on to this discussion but I couldnt figure out how to start a new discussion and I am going mad! I have a new ipod because my last one was stolen and I have plugged it in and my PC wont recognise it. I think that is because my old ipod is the only one my computer will accept. Can that be right? It said the hardware device had been detected and then it said that it was troubled and it simply did not work. Now it is plugged in and not at all recognised in my computer anywhere. Can any one help this clueless girl who simply wants to listen to music again?
    Thank you.

  • Ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.

    ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.  help?

    Hi stitchinstar!
    I have an article for you that will help  you troubleshoot this issue with your iPod and iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • TS1538 Ipod is stuck in recovery mode, and not recognized by iTunes. Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized.  Genius said it may be a hardware error, but all of the buttons and cords work. Now

    iPod is stuck in recovery mode, and not recognized by iTunes.
    Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized.  Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?

    If it does not work on other computers then I agree with the Genius

  • How do i get  my video to play from my ipod to my pioneer AV2300DVD music, but no picture. Will play on the ipod itself but not connected.

    How do i get my video to play on my Pioneer AV2300DVD music, but no picture. Will play on the ipod itself, but not connected. Also some songs and album art randomly cannot be located..

    How are you connecting it?
    What video are yu trying to play?
    Some video have copy protection that prventplaying them ia VGA out from the iPod.
    You really ae not provideing us enough information to help you. I do not know what a Pioneer AV2300DVD even is.

Maybe you are looking for

  • From FCP timeline...send to soundtrack pro audio file project is greyed out

    The send to multi track is not greyed out but that's not what I need. The stereo audio file is 48KHz and I have 7 tracks of audio in the sequence all of which are stereo except the VO track. If I use "open in editor" to open a stereo file from the ti

  • How to deploy ear file in OATS

    hi gems..good afternoon... I need to deploy my application's EAR file in OATS to test it. I have installed OATS 12.0 version and also have started the demo setup i.e the medrec application from the documentation. Now, how can I setup my application i

  • REFRESH_ADMIN_DATA_FROM_SUPPORT + iBase generation

    Hi folks, I scheduled job REFRESH_ADMIN_DATA_FROM_SUPPORT (report AI_SC_REFRESH_READ_ONLY)  and maintained V_AIINSNRS // V_AISAPCUSTNOS. Also I have set "Generate Business Partners from OSS" to 'C' and "Generate Systems from OSS" to 'N'. Generation i

  • Assignment of Project while creating TP

    Hi All, We have activated ChaRMLite in our project and all the systems in landscape. I have a scenario. We want few transports to be created outside chramlite for one system landscape (BI landscape), but we want to restrict users creating TP request

  • How to recover the unused column

    According to the spec, 'set unused' does not actually remove the target columns and the column data remains in the table's rows. but if a column was marked as unused, there are no any access to the column. then why the clause is released?is it better