IPod connection error with iTunes.

I have windows 7 64bit and I installed iTunes 64bit and when I connect my iPod I get the error message: Unable to use this iPod please uninstall this version of iTunes and download the 64bit version. Well I did that and still no succses. I have an iPod 4 32GB
I dont know what to do...

Could you have a look in your Uninstall a Program control panel, please, Jimmi, and check to see if Apple Mobile Device Support is listed as an installed program?

Similar Messages

  • IPhone 3G 2.1 connection error with iTunes 8 on Windows Vista Enterprise

    I was previously able to connect my iphone with my work computer (Windows Vista Enterprise) and it would recognize my phone. However, since I updated my iphone to version 2.1, it will not recognize the phone and gives me the following error message:
    "iTunes could not connect to the iphone because an unknown error occured (0xE8000024)."
    I am able to connect my phone with version 2.1 to my home computer running Windows XP SP2.
    Any idea what may be causing the connection error in Windows Vista?

    Hey TranceCadet,
    This could be caused by a USB connection issue.
    Make sure the iPhone is directly connected to a high speed USB port on the PC and not plugged into a hub, monitor, or keyboard. Disconnect any other USB devices, other than the keyboard and mouse.
    This article has some general USB troubleshooting tips: http://support.apple.com/kb/TS1286
    You may also want to disable or reconfigure any security software. This article will walk you through putting the PC in a selective startup mode, which will bypass most application conflicts.
    http://support.apple.com/kb/HT2292
    Jason

  • IPod connection trouble with itunes

    Hey, My IPod connects to itunes without any problems, but when i want to change any settings such as, enabling disk use, i get an error message saying my IPod cannot be found :S!

    Steven: Follow this link....it will guide you through the 5R's. I would recommend that you RESTORE your iPod to factory defaults. NB this will wipe the iPod of everything so that you can start a fresh.
    http://docs.info.apple.com/article.html?artnum=61711
    Post back how you get on please and we'll take it from there.
    David

  • Updating to iOS beta5 + Connecting errors with iTunes

    Hi guys,
    I have a really bad problem:
    I didn't want to update the software of my iPod touch (5. gen) to the 5th beta version, but when I turned my iPod on a few hours ago, it shows me a screen like when you have to set up a new one. It was a little bit confusing... I linked the Pod with my MacBook and wanted to restore the iPod in the Xcode Organizer. He extracted the software image and opened it, everything was fine. But suddenly, during he was going to finish the process, he showed me a warning window and told me that he cannot open the software image. I can't remember the exact warning but he sayed something like that.
    After this, I tried to restore the iPod through iTunes. He loaded the iOS 6.0.1 image and tried to put it on my iPod a couple of times but finished the process always by poping up a warning which told me that the process failed or that the image has a damage. After propably 5 or 6 times, the process successeded, but then I tried to restore the iPod again through the Xcode Organizer to put on the iOS 6.1 Beta5 again. Same procedure as before restoring through iTunes. It failed and I tried to put back on iOS 6.0.1 but since the process failed a second time in Xcode, he's telling my in iTunes when I try to put the 6.0.1 image on that such a file is already existing.
    What can I do or what should I do that it will working fine? I'm not so happy with beta versions on my new iPod so please tell me how iOS 6.0.1 will work on my Pod.
    thanks
    PS:
    I've also an other problem with iTunes... every time I connect a device to iTunes it pops up and says that "Datenklasseninformationen konnten nicht erstellt werden. etc" ("Data class information (??) couldn't be made"). That's a problem I've got since.... yeah I think I have those problems since I've updated to the 2nd Beta Version of iOS and/or Xcode46-DP2.

    Use the private developer forums. These are public forums where we cannot discuss beta software.

  • Network connection error with itunes

    My husband and I have tried for two days now to login to the itunes store to buy more music. It says "itunes could not connect to the itunes store. The network connection was refused. Make sure your network settings are correct and your network connection is active, then try again." Is anyone else getting this message? We already updated itunes and we are able to connect to the internet. Any help would be appreciated.

    I have been having the same issues for several days. I feel like I have tried eveything and can't get it resolved. Here are my diagnositcs. Any help would be greatly appreciated!!!!
    Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
    Dell Inc. Inspiron 1520
    iTunes 8.2.1.6
    QuickTime 7.6.2
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.5.2.2
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 4B6A6B0637288700
    Current user is not an administrator.
    The current local date and time is 2009-09-08 18:35:47.
    iTunes is not running in safe mode.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {7ADEB39E-42B9-43E4-A094-08D219FBDAEB}
    Description: Bluetooth Device (Personal Area Network)
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name: {326D42F8-2AC9-444F-A3E0-ADC3EC583612}
    Description: Intel(R) PRO/Wireless 3945ABG Network Connection
    IP Address: 192.168.1.100
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Tue Sep 08 17:53:41 2009
    Lease Expires: Wed Sep 09 17:53:41 2009
    DNS Servers: 68.87.64.150
    68.87.64.150
    68.87.75.198
    Adapter Name: {D6A1165E-A41E-47BD-A267-83C77380D3C3}
    Description: Broadcom 440x 10/100 Integrated Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2009-09-08 18:29:50.

  • Ipod connection issues with itunes

    i know, i am the one-thousandth person to write in about a connection issue, but i just bought a 8gb nano. my pc is recognizing the ipod, but itunes does not automatically start.
    instead, if i manually try to start up itunes, it either doesn't start at all, or when it does, it immediately locks up. or it will try as hard as it can to sync and then locks up.
    once i disconnect the ipod from the usb port, itunes will come back to life. i have done EVERYTHING the support pages say, reinstalled itunes, dumped temp files, stopped conflicting software...everything short of sending in the new ipod to be serviced. please if you have run into this particular problem and/or you know how to fix this issue, please respond
    i don't really want to send a brand-freaking-new ipod off to be serviced b/c i think this is a software issue.

    Hello lalajamjam,
    It sounds like you've done a rather good job of troubleshooting already. Other than testing to see if the issue is user-specific per ( http://support.apple.com/kb/TS1717 ) and possibly testing the Nano on another computer, there are few additional steps to try prior to getting it serviced.
    Charles

  • My ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??

    my ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??

    I did the restore and it cleared and reset the iPod but after it finished the same error came up. I tried this 3 times. Also it no longer shows up as a drine in My Computer.
    if it's relentlessly doing that to you, it's plausible that the message is being caused by a Windows drive letter confusion. (that's consistent with the disappearance for My Computer, too.)
    see the following article for troubleshooting information on that possibility:
    "iTunes has detected an iPod in recovery mode - Use iTunes to restore"

  • Connection Error with iPod mini to Bose Home Theater System

    When connecting my iPod mini to my Bose Home Theater system, it recognizes that iPod has been connected, but after the "Acquiring Signal" process, it gives me an "iPod connection error. Please re-insert iPod into docking station." I tried several times, but the result is the same.
    My iPod mini has been updated with the latest software, and I did a system restore to return everything to factory defaults, but still no luck.
    Any suggestions.

    Hi. What you need to do is Launch DVD Player. Go to Preferences. Select Disc Setup tab. In Audio Output under Audio in the second part of the menu, select Digital Out-Built-in-Output. Then click OK. See if this works, 'cause mine does.

  • Here's the exact scenario with it: 1) Ipod connected successfully to iTunes. 2) Drag song from Library(in AAC format) to My Ipod. 3) Song plays successfully in iTunes. BTW: This is one of the songs from my cd. Not bought. 4) Eject Ipod. 5) Find song in

    Here's the exact scenario with it:
    1) Ipod connected successfully to iTunes.
    2) Drag song from Library(in AAC format) to My Ipod.
    3) Song plays successfully in iTunes.
    BTW: This is one of the songs from my cd. Not bought.
    4) Eject Ipod.
    5) Find song in Ipod and press play.
    6) Display for song and time appear.
    7) About 1/3 of a second of the song plays, then it cuts out and restarts itself. (boots me back to apple logo)

    Nope - and it was set to not look for them.
    The final clue came when I tried hooking the drive directly to the computer, instead of to the airdisk. iTunes still hung. Then I disconnected the drive and tried to run it, and iTunes came up right away - but with an ! next to each song. Clearly it was trying to find/touch every file in the library on first startup.
    I didn't try plugging in the drive and leaving the hanging iTunes running for more than a few minutes, so it's possible that it would have recovered and launched. But after removing the XML file, restoring the library to my pre-7.7 version, I could hear it accessing the directly attached drive (and see it in disk activity in the monitor) for a few minutes (less than I'd left the hanging one trying), before it came up.
    Conclusion:
    1) 7.7 is definitely trying to touch/see all the files in the library on first launch (proved by the ! when they are missing).
    2) Disconnecting/interrupting the touch/see MAY have corrupted something (can't prove it).
    3) Since touching 10,000 files takes a LONG time even at 802.11n speeds (let alone b or g), it's worth the hassle to plug the drive in directly for the first time.
    4) Patience is a virtue

  • 2nd Gen Ipod will sync with itunes but will not download new song

    My Ipod will sync with itunes but will not download newly purchased songs.  It is Ipod nano 2nd gen.

    If you want to use automatic syncing, you may need to set up or update the iPod's Music sync settings in iTunes.  If the new songs are not included in what gets synced to the iPod, they will not sync.
    If the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.  The iPod appears in the sidebar, under DEVICES.  Select it there, to show its Summary screen to the right.  Toward the top, there is a bar of buttons, starting with Summary.  Click on Music next to Summary.  This Music screen is where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music, if not already checked. This is the "switch" to enable automatic syncing for songs.
    NOTE:  If Sync Music is not already checked, that means the iPod is currently set to Manually manage music.  Setting up automatic syncing will replace the iPod existing content.  If you want to add the new songs manually to the iPod (instead of using automatic syncing), please post back.
    If your iTunes library fits on the iPod, you can choose the option to sync Entire music library.  Otherwise, choose the option to sync Selected playlists, artists, albums, and genres.  Below that, select (checkmark) what you want to sync to the iPod from the lists.
    One convenient way to set this up is to first create one or more playlists in your iTunes library, with ALL of the songs you want on the iPod.  Or you can use existing playlists.  Back on the iPod's Music screen in iTunes, select those playlists under Playlists.
    When you click Apply, iTunes syncs the songs in your selection(s) to the iPod (replacing its existing content).  Going forward, to update the iPod, you can just update those playlists in your iTunes library (add/remove songs).  If you have new songs, add them to a playlist that is synced to the iPod.  The iPod does not need to be connected.  The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates your iPod with the same changes.

  • My Ipod wont Sync with ITunes! Please Help!

    My Ipod wont Sync with ITunes! Please Help! I have the latest version of Itunes, but my ipod will not sync with my laptop. The diagnostic test has no answers and says everything is normal. When i try to sync, it says "an unknown error occurred (-39)". Any suggestions?

    check for any viruses

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • What generation iPod is compatible with iTunes 7?

    My itunes library is stuck on a computer that is unable to connect to the internet. Meaning I can't upgrade.
    To be safe, I'd like to buy an older ipod that is able to sync with itunes 7 so i have it.
    My ipod was stolen.
    What generation/ version ipod is compatible with itunes 7?
    Thanks.

    All models released prior to or on the release date of that specific version of iTunes.
    (92465)

  • How do you disable iPod Auto Update with iTunes?

    How do you disable iPod Auto Update with iTunes? I know there is a key press combo that will do it but I forget which keys. Anyone?
    Intel Piii   Windows XP Pro  

    Keep iTunes from automatically updating your iPod
    Another Easier Alternative:
    While connecting the iPod to the computer, hold down the Shift + Ctrl keys in Windows (CMD + Option keys on a Mac). This will stop the iPod from auto-syncing with iTunes. The iPod will then appear in the iTunes source list. Wait until you are sure the iPod has mounted, and that it will not auto-sync and then you can release the keys. This action may take between 3 and 25 seconds depending on your computer.
    You can then ‘right-click‘ on the iPod icon in iTunes’ source column and select iPod Options, then check the box that says “Manually manage songs and playlists”. You can now manage your library without losing any songs on the iPod.
    Note: If connecting to a different computer than the ‘iPod’s Home Computer’, iTunes will ask you if you want to update your iPod and give you an opportunity to opt out. This will not happen if you connect to the ‘Home’ computer – iTunes will auto-sync without warning!. Best to know the difference.

  • My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. Solutions?

    My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7.  There's just a thing that pops up and says that in order to activate banners and push notifications I have to connect the app with iTunes. The thing won't go away no matter how many times I push ok, and it doesn't give me another option. Solutions?

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

Maybe you are looking for

  • How to set runtime parameter for the entire system

    Hi, I have a problem with setting runtime parameters in jre v1.6.0_07. I have an XP computer with multiple users and to use the application eavery user must set the runtime parameter once by going to java control panel -> Java -> Java applet runtime

  • How to do invoice in other company code for a PO raised from one C.Code ?

    Hi A company has 2 company codes say A and B. Company code A raises a PO to a vendor and states to send the Invoice on the name of Company B, though the GoodsReceipt is done in C.Code A. How this scenario can be mapped into SAP-MM ? Cheers Maruthi.

  • Copied webtemplate doesnt work

    Hi I have copied default webtemplate 0ANALYSIS_PATTERN  to ZANALYSIS_PATTERN. I have made ZANALYSIS_PATTERN as my default web template in the RSCUSTV27 and restarted J2EE sever from SMICM . but still  I can't see the changes being reflected in the we

  • 2.7ghz Dual Core verses Single Core

    Hi, I have a Pro Tools system with PCI audio cards that I sunk quite a bit of money into. Needless to say, I'm stuck in PowerMac purgatory until I come up with the cash to make a total PCIe conversion. With that being said, I am now trying to determi

  • Have error in calling pll

    i made a procedure and put it in a pll library and save, compile library and define the path in default.env file in dev suit home , then i attach the library to the form and click (remove path option) and compile the form and run the error :- when i