Ipod connects now only as USB 1.1

Hi,
I have my ipod for years and I never had this problem. Since few days an information message appears when I connect the ipod to my mac mini, telling me that the connection is only USB 1.1 (directly to the Mac Mini, this can not be the case).
I remember that the last thing I changed in the ipod was to allow (erroneously) the "import photos" option, then I deselected it again.
May be I should reset the ipod to the factory settings?
thanks a lot
Alex

I have the identical problem on my eMac (not Intel). No problems connected at 2.o USB until 3 weeks ago. Everything on the video iPod and Mac are up to date. Mac OS 10.4.8. I disconnected all other USB devices except an external hard drive that has been fine. I have tried two cables AND my daughter's iPod Mini. All report USB 1.1. Yes, it is slower.
Oh! I did upgrade to iTunes 7.1. At the same time as the problem appeared? I dunno.
Hi,
I have my ipod for years and I never had this
problem. Since few days an information message
appears when I connect the ipod to my mac mini,
telling me that the connection is only USB 1.1
(directly to the Mac Mini, this can not be the
case).
I remember that the last thing I changed in the ipod
was to allow (erroneously) the "import photos"
option, then I deselected it again.
May be I should reset the ipod to the factory
settings?
thanks a lot
Alex

Similar Messages

  • TS1538 I was attempting to update iphone 4s today, laptop went flat during the last stages. The iphone now only displays USB cord, with an arrow pointing towards iTunes emblem. iTunes will not accept/read the iphone. HELP??

    I was attempting to update iphone 4s today, laptop went flat during the last stages. The iphone now only displays USB cord, with an arrow pointing towards iTunes emblem. iTunes will not accept/read the iphone. HELP??                   

    If you have the latest version of iTunes you should not have to download the ipsw file separately as jalp suggests. iTunes will download it automatically.
    This error (9) most often means that your antivirus or firewall (or router) is blocking access to Apple's servers. In rare instances it can also mean that the phone was hacked (or "jailbroken") to unlock it. If this is the case you must do a DFU restore, not Recovery Mode, as follows:
    Reboot your computer
    Disable your antivirus and firewall. If you has Kaspersky you may actually have to uninstall it, as it can never be turned completely off.
    Connect the USB cable to a USB port directly on your computer, not to a hub. DO NOT connect the other end to the phone
    Disconnect all USB devices except for mouse, keyboard and iPhone cable.
    Launch iTunes
    On the phone hold the HOME and SLEEP buttons at the same time for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button. The screen should be black. If it has an Apple logo this means you held both buttons too long. Release the HOME button and do it again.
    While holding the HOME button connect the free end of the cable to the phone.
    After a short while iTunes should recognize a phone in "recovery mode" (iTunes doesn't know the difference between DFU and Recovery modes, but the phone does)
    Release the HOME button and don't touch the phone or the computer until the process completes or you get an error message. Ignore any displays on the phone.
    If the error recurs the phone was probably messed up when it was hacked. This is not a hardware problem, or if it is, it isn't one you can fix.
    You can try repeating these steps with a different computer and a different cable. If that fails also the phone is probably not repairable.

  • I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod.

    I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod. I have already resynced it, any suggestions on how to fix the problem without having to restore my iPod to factory settings.

    Becaise the digitizer is broken in that area
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • HT1476 Can i use wall power charger 5v 1A to charge Ipod touch5 or only via usb?

    Can i use wall power charger 5v 1A to charge Ipod touch5 or only via usb?

    5volt 1amp charger is standard for charging the iPod (5watts). Using a USB port can take longer because the charging current can be somewhat less than 1amp. So you are better off using the wall charger.

  • My 160gb iPod classic now only holds 4 songs.

    It syncs up to 521 songs then iTunes freezes. When my iPod disconnects it only has 4 songs!
    It worked fine for around 2 years...
    Help! Please and thank you!

    I have over 1000 songs in my iTunes by the way.

  • IPod videos now only show audio

    I have an IPod 80 gig video (Black) and for some strange reason my videos are now audio. If I were to play them via ITunes they'll show as video, but on the IPod it only plays audio.
    Even more odd, if I were to do a search on XP for .mp4 files it no longer shows as available, yet I can manually open the folders and play them. Is there anyway to restore it back? Thanks for any help.

    To update I still have the files, but now they're on my audio playlists. Earlier I had accidentally unhidden the files and think this may be the cause.
    On the IPod Summary it's showing as "Other" (And missing from Movies/TV) but if I go into the playlists the files are there

  • While updateing iphone 3gs, lost internet connection. now only option is to restore in itunes. I just want to finish update!

    I was updating my iphone 3gs. I lost internet connection when my went to restart (I forgot I was using hotspot). Now when I connect my phone to finish, the only option it gives me is to restore. I don't want to do this. I have disconnected and restarted phone and macbook pro. Software is up to date. What can I do?

    If the only option is giving is to restore or has a connect to itunes logo - then that is the only option you have. You may need to put it in forced recovery mode in order to restore. http://support.apple.com/kb/HT1808?viewlocale=en_US
    Once restored you can restore from a backup or sign into icloud in order to recover any contacts, etc that you had on the phone previously. If you are still missing contacts, which is usually one of the most important things on a phone than make sure you have added any and all email accounts you previously had on the phone.

  • IPod connected & now constant Do not disconnect on Display

    I recently connected my iPod with Color Display to my Mac, iTunes did not immediately boot up nor did the iPod icon appear on the desktop. I manually started iTunes and ITunes began its synching routine and the "Do not Disconnect" message appeared on the iPod Display. When iTunes said the Sync was complete, the Do not disconnect message never reverted to the Main Menu. I ejected the iPod and the Do Not Disconnect message is still on the Display. I can not turn my iPod off, Disconnecting and reconnecting my iPod to the computer does not change the display status. I would just like to get it back to normal working status.
    Can anyone offer recommendations as to what I can do?

    iPod ran ow on battery power. iPod automatically shut down. When plugged in, iTunes performed a Synchronization and iPod started to re-vharge its battery

  • Sound dropping when iPod connected to stereo - iOS 4.1

    Why is the sound dropping when watching videos from the iPod when connected to a TV?
    I have a Pioneer VSX-1019AH-K AV receiver with this nice setup (cable and functionality) that lets me watch videos on my TV with the iPod connected to the AVR (USB + composite video cable). The result is not bad, with better video than audio.
    HOWEVER after upgrading to iOS 4.1 the sound (not picture) is dropping after various intervals of time (1 - 20 minutes) while plugged into the AVR. When I unplug the connection the video stops and the iPod goes back to the menu. The audio plays normally when restarting the video without the cable and continues to play normally when I plug the AVR cable back into the iPod. On occassions when plugging the AVR's cable into the iPod the sound does not come back, though unpluggin and plugging in again usually does it.
    Anyone else have similar issues? I see some issues with apps and battery life under iOS4.1 and a few issues with audio / picture playback:
    http://discussions.apple.com/thread.jspa?threadID=2579535&tstart=15
    http://discussions.apple.com/thread.jspa?threadID=2577571&tstart=15
    http://discussions.apple.com/thread.jspa?threadID=2582339&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=2582478&tstart=30
    http://discussions.apple.com/thread.jspa?threadID=2578926&tstart=0
    Have people had similar problems when iPods are connected to AVRs or TVs through composite or component cables? I realize the quality of sound / pictures from the iPod is not superb though it is as good as my sattelite dish. I could just have a computer connected to the AVR via HDMI or similar but well that would mean having a computer just for iTunes.

    Thanks for posting this because I too have the Pioneer VSX-1019AH and have just noticed this problem. I rarely listen to my iphone (ipod) through my receiver and this problem never occured before until yesterday.
    I am experiencing a sound loss at random times, and it takes restarting the receiver, or disconnecting then reconnecting the iphone cable to get the sound back again, only for it to go off again in a few moments time.
    Whilst the sound is off, both the iphone and receiver are continuing to play music because you can see the title of the tracks change on both devices. So where the fault lies is hard to tell but I'd say it's with the ios4.
    I don't know whether Apple will provide any support regarding this problem but I do notice the receiver has been endorsed "made for ipod" which means it meets Apple performance standards.

  • My old movies now only play the audio

    My old movies that used to work just fine on my 60 GB Ipod are now only playing as audio files.
    The problem started about a month ago, not sure why. Probably windows, lol. When i went to the video list all of a sudden EVERY song and video was being displayed as a video. However, the tracks that were truly videos were playing as audio only. So i went to video settings and made sure that it wasn't on tv out. The problem persists. So then i connected my ipod to my computer and under the ipod summary screen it says i have audio, photos, but no video. So i went to "get info" on the videos to see if they had changed into audio files but it still says under "summary" and then "kind" that it is a MPEG-4 video file. So then i tried playing it in itunes and IT WORKS FINE! I will mention again that all these videos were playing just fine before. What is going on!?!?
    HEEEELP!!!!
    -   Windows XP   Windows suks.

    Go to edit-->preferences with the iPod showing up in iTunes and hit the iPod tab. Then hit the podcasts tab under the iPod. Make sure transfer all podcasts is bubbled. Now go to the videos tab and make sure transfer all videos is selected. Click okay.
    See if they now appear
    btabz

  • Ipods connect then disconect

    ok ive 4 ipods 2 classics a touch and now nano
    my first 80g classic worked sometimes in 9.02 ,worked before 9.02and when not plugged in is fine ,
    2nd 80g classic not showing in itunes or windows xp in 9.02 ,again as above all fine when not plugged in .
    touch 16g not showing up at all
    nano 5th gen not showing up
    But on 3 other computers all running 9.02 xp and vista all pods work fine no problems .my main computer the one with music on has the problem all was fine before i updated,and when ipod classic conects its still fine.
    i;ve tried all steps
    1 re-installed xp sp3
    2 reinstalled itunes 9.03
    3 5 r's
    *4 reistalled itunes 8.0.2 still nothing,after uninstalling*this made my other ipod connect but still other 3 ipods nothing
    many posts nothing back
    Apple have said nothing atleast comment !!

    Still no fix on itunes 9.2 ,ipod connects now for about 3 mins then Disconnects ,other ipods still not showing up on computer or in itunes.all ipods work fine on my laptop running 9.2 .

  • Ios 4 3gs Now will not play through my usb/ipod connection on car stereo

    With new ios4 I cannot get my 3gs to play through my car stereo's ipod connection (usb)anymore. os3.1 or whatever the old os was worked fine. The car stereo controlled the tracks, artists, etc.. Now I plug the phone in and get a message saying it is not optimized to work with the stereo and may be subject to noise and interference, then the only option to click is "dismiss" and will not work. Any ideas? I tried the re sync and still will not work.

    The method used to recognize the USB device has a clever bit of code in the firmware to improve the connect time once the initial handshake with the device has been established. So after the update to iOS4, the host device (Car Stereo) still thinks that it is connecting to the un-updated client device (iPhone prior to updating to iOS4) The updated client device (Your iPhone with iOS4), must fool the host device (Your car stereo), into believing that it is an entirely new device. This is done by connecting your iPhone to the stereo head USB port with the iPhone switched off completely. This is achieved by holding down the top power button on the iPhone until the red slide bar comes up and prompts you to shut the iPhone down. Do this and then with the car stereo switched on, plug the iPhone into the USB socket and wait till the iPhone starts of it's own accord. If it does not start, press the top power button on the phone until it starts. This will force the host device (Your car stereo) and the client device (Your iPhone) to re-negotiate the handshake between the devices and get you back to where you will once again be happy.
    Now we can all stop beating up both the Car Stereo manufacturers and Apple and focus on being civil gentle folk that enjoy discussions about how clever we all are to be able to use amazing technology to get ourselves over-stressed and irritable.

  • I dropped my ipod touch 3 generation into some water.  Now it shows me the itunes logo and the usb cord picture.  I restored my ipod, and now it won't connect to itunes or my computer. What should I do?

    I dropped my ipod touch 3 generation into some water.  I let it dry off completely befor turning it back on.  Now it shows me the itunes logo and the usb cord picture.  I restored my ipod, and now it won't connect to itunes or my computer. What should I do?

    Hey
    Does it charge when connected, if not you may have broken it..
    You can always try an apple Genius at an Apple Store,
    Jason

  • IPod screen showing only USB cable to be connect to iTunes after Update and Restore.

    My 4G iPod model no is A1367 and the software version is 4.2.1, so as it’s a very old version i wanted to update the software to iOS 6.1.6, so I have taken backup, then Update my device with iOS 6.1.6 after that I tried to restore my device, it started to downloaded (847.8 mb)  iOS 6.1.6  again and again and iPod screen showing only USB cable to be connect to iTunes. please tell me how should i resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device... Re-Sync your Content

  • Upgraded ipod touch to ios 6 now only have blue screen and wont connect to computer

    I upgraded my Ipod touch to the ios 6 now only have blue screen and wont connect but will charge. Have reset Ipod but just goes to blue screen on start up. is there any fix? 4th gen ipod.

    Try a manual install (if iTunes will detect unit in DFU mode), as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

Maybe you are looking for

  • Authorization problem when displaying icons in BW Report

    Hi All I have the following problem when display BW Report as iView: The report data itself is displayed perfectly but to display the icons (like DrillDown arrows, Hierarhy level open arrows) the Windows login message "Connect to <my BW server.com>:8

  • Subfolder Dates Incorrect When Importing Photos from Nikon D3000

    Bit of a weird problem: When I use the Get Photos dialog to import the RAW files from my camera, and ask it to create subfolders based on the shot date, the subfolder dates wind up all over the place.  I did a set last night that had folder years tha

  • Can a client be refreshed with client copy?

    I created a new client by doing client copy from client 200 creating client 202 Now I want to refresh client 202 from client 200 (ALL ON SAME SERVER) , can I just re-run the client copy with source client being client 200 to client 202? If so what am

  • Regarding Radio Button Tab Traversal

    Hi All, Iam Using the JGoodies , I have the RadioButtons in my application . Here my problem is when I traverse through the Tab , focus is moving to the Deselected RadioButton label , which should not happen . Is there any way to avoid this ? Can any

  • How can I install SL 10.6.3 on my brand new !00GB SSD HD?

    How can I install MAC OS X Snow Leopard version 10.6.3 in to my brandnew Samsung 100GB SSD ?. I have a MacBook Pro model A1150 , 2GB memory and just bought the Mac OS X Snow Leopard version 10.6.3. alexandervuong