IPod contines to restart during upload

i just bought a 5th generation ipod video i installed all the software before i pugged in my ipod then i plugged in my ipod updated it to version 1.1 then tried to upload songs from my itunes library to my ipod but when it uploads around 1 gb of music the ipod restarts by itself and all the songs that were uploaded onto the ipod so far are deleted and it does this process over and over ive tried many things to fix it such as uninstalling itunes quicktime and ipod software updater and reinstalled all three, ive tried to restore my ipod to factory settings numerous times i have ran the chkdsk program on my windows xp pro sp2 i have tried to upload only certain songs and i have tried to manually upload songs if anyone has had these problems or knows how to fix them please help me!
--Casey
Windows XP Pro
Windows XP Pro

Hi all, received my replacement ipod from apple yesterday and was feeling very wary of even attempting to use it. Got home last night and followed their instructions to the letter. Guess what.. this ipod is doing exactly the same thing, constantly disconnecting when uploading songs from itunes to the ipod. I eventually got the exclamation mark of death and tried to restore th eipod but got the firmware failure message so went back through the deinstall of itunes / quicktime / updater and installed the back level versions from my CD... exactly the same problem, firmware failure. I have an old thinkpad running win 2000 with USB 1 and was able to use this to restore the ipod (albeit slowly) but it would only allow me to restore to the latest updater. I loaded about a gig of songs onto the laptop and these downloaded to the ipod ok, albeit VERY slowly.
I think I have come to the end of the road now and will this weekend take the covers of my PC and see who makes my USB 2 ports (but I'm sure thy are all onboard to the motherboard). If thats the case then I'm off to PC world to purchase the belkin USB 2 PCI card to see if that works.... let you all know.

Similar Messages

IPad Mini keeps restarting during recovery mode!?

I bought an iPad Mini a couple of months ago,as a joke my aunt put a password for my iPad, i kept trying to open it, until i hit the disabled screen connect to itunes, i searched the web and found a waay out of it, so when i start recovery mode on my laptop, it does the iPad Software Update first. The iPad restartes during the restore and i have to do the restore one more time but it just happens again, PLZ HELP!!

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IOS 6 upload just crashed 2 ipods on 2 different computers with 1602 error - anyone know how to recover. Ipods are both locked in upload screen.

I have 2 ipods which are individually synced to 2 different computers using 2 different apple account id's. Both crashed during the IOS 6 update with the same indication and message. error code 1602 and message that there was an unknown error during the update. In both cases, the ipods are stuck in the upload screen even if I power cycle them and niether computer will recognize them any more.

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Also try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Computer restarts during downloads, previews, etc..

I'm having a problem when I try to preview a song or try to download or even when I try to listen to a song on my ipod via the computer. This does not happen all the time, but frequently enough to make it very very annoying. What happens is my computer decides it needs to restart during one of these events. This does not happen with any other programs, only iTunes. Any ideas? Thank you.
home made Windows XP Pro

Thanks for your reply. To answer your questions. I have been messing around with this pc for a couple of months. The battery charging connector is fixed (the battery is charging) and I am using AC power when installing the OS.
I do believe the HD is good; but, really don't know for sure. Using the media disks, I have wiped it clean by running that option. It takes 22 hours to run that option. The recovery process runs completely and finishes. It is after that when things go bad.
The PC starts and gives you the starting for the first time screen. It then goes into the “Configuring System” mode and runs for about 15 plus minutes. It shuts down and restarts a number of times.
It finally restarts, the “Configuring System” page comes up with a configuring drivers label and freezes. No mouse, no nothing. It will set there for ever it seems. That is the part I don't get. No errror message, no nothing.
When you force a restart, it doesn't give you the normal windows "bad shut down" screen. Just goes to the password request. Which is wrong because there are no assigned users to have passwords.
Wish I did have another HD to try, maybe I will put this HD in an other pc and see what happens.
Ed

My ipod touch accidentally disconnected during sync, after that it wont sync at all. although it appears to be syncing on botht he computer and ipod, it rushed through "determining which tracks to sync' step and no changes are actually made.

my ipod touch accidentally disconnected during sync, after that it wont sync at all. although it appears to be syncing on both the computer and ipod, it rushes through "determining which tracks to sync' step and no changes are actually made.i restarted both and reset the ipod. i checked to see that the computer recognizes the ipod (yes) and tried to sync over wifi with the same result...(i am afraid to retore to factory original beacuse the problem is about transferring from th computer itunes to the ipod)

There is no good way for yur problem since iTunes sees the iPOd. Yu can ry removing and reinstalling all the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
However, I suspect a restor, first try from backup, is required.

IPod and iTunes freezes while uploading music

So a couple of weeks ago, I was using my 40Gb iPod when suddenly it froze. I reset it but when I tried to play another song, it skipped all of them as if they weren't there. I had lost my entire library in an instant. Once I got back to my computer (Powerbook) I managed to restore it. During this the folder with the exclamation mark and the run-click-run-click problems showed up. Now after successfully restoring it, I can't get my music back on it. For some reason at various points in uploading songs (whether it be after 20 songs or 2000) both my iTunes and iPod freezes. I normally reset it which causes the "improper device removal" sign to come up. Then when I plug it back into my computer I get the message that iTunes can't recognize the information on my iPod and that I need to restore it again. However sometimes it takes 3 or 4 times of it freezing during uploading to get that message. Either way, I can't get my library of music back onto my iPod without it freezing. I never see the folder with exclamation mark and the music that I do managed to get on there works perfectly fine.
Does anyone have a clue what is wrong with my iPod and is there anyway to fix it?

I tried the update with no success. Here's another update after actually trying to use my iPod:
When I have it just plugged into headphones or speakers half of the songs cut off in the middle, just a little bit off near the end. Some don't work at all. Plus my iPod is very slow while moving through the menus.
When I have it plugged into the Monster FM transmitter, I really can't get anything to work. It freezes on almost every song. The most I can get a song to play is about 16 seconds before it skips over to the next.
This seems just seems really messed up but it seems to be a software problem. Any ideas?

Upgrade - SAP will not restart during MAIN_NEWBAS/STARTSAP_NBAS phase

We are upgrading from 4.7 to NW 7.0 (SP#5)
SAP will not restart during the phase MAIN_NEWBAS/STARTSAP_NBAS
We had to manually apply the kernel (NW 7.2 -#63 - NON UC). This looks OK when we calll DW -version. The T03 system will not start either through the upgrade tool or manually. There is no useful log in
\usr\sap\T03\DVEBMGS15\work
The upgrade tool reports this error.
Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
Last error code set: RFC call to subst_get_uvers failed with key
RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=CSIAS9, GWSERV=sapgw15, SYSNR=15
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'CSIAS9:3315' not reached
TIME Wed Aug 31 15:09:36 2011
RELEASE 720 COMPONENT NI (network interface)
VERSION 40 RC -10
MODULE nixxi.cpp
LINE 2898
DETAIL NiPConnect: 165.156.101.209:3315
SYSTEM CALL connect
ERRNO 79 ERRNO TEXT Connection refused
COUNTER 550
Thanks
Matt

Thanks Rene, I have updated the ticket with the required information. In the mean time I am interested if anyone else had had a similar problem during an upgrade. We did have an initial error with the crtsidusr command ( setting CLASSICUSERCONCEPT + removing some of the SPCAUT) seemed to fix that. At this point the upgrade failed and we had to manually APYSAPKRN, the log shoewed it wanted the NON UC which was odd as we are including the UC in the upgrade.
Thanks

HT4623 Please help ! My Iphone 5 is restarting during a call or internet browsing, o just simply browsing the meniu. I can not us it any more !

Please help ! My Iphone 5 is restarting during a call or internet browsing, o just simply browsing the meniu. I can not us it any more !
It is functioning max 5 minutes. I have tried to restore it via Itunes but it sitais to less opened.

Hello neegie
Try putting your iPhone into recovery mode and then use iTunes to restore it. After that then test it out. If during the restore you get and error code, check it against the second article for further assistance.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Regards,
-Norm G.

Auto selection of file from folder during uploading??

Hi all friends,
Iam facing with one problem I am developing one uploading software for that i have used swing and servlet.Now my problem is i want to give auto selection of file from one folder means user just copy the files from any computer on network and paste it in predefind folder.And when they click on upload button it should start uploading of file one by one and after completion of uploading it move that file into another folder one by one.Now my software doing it perfectly but if user copy and paste any file in that predifined folder from network computer during uploading then they have to click upload button again after completion of first queue of files(for example if user first copy 10 files and start uploading and inbetween uploading of that 10 files if user copy another 10 files from network computer then they have to click on upload button again after completion of uploading of first 10 files).But my user requirement is they want to click on upload button once only at the time of starting my application and my application automatically select the file one by one from folder and send it to destination.Means if they copy the file from network machine inbetween uploading or any other user from network send file in that folder then my application should select those file automatically and start uploading means they don't want to click on upload button again.Can any one plz guide how I can slove this problem.Below r my codes:-
Upload.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
suspendflag=true;
Resume.setEnabled(false);
Suspend.setEnabled(false);
dest=frame.m_txtURL.getText();
File ff=new File("d:\\DTMS\\Upload");
File[] files = ff.listFiles();
fileList = new Vector();
if(files == null)
textArea.append("There is no file");
return;
else
for (int j = 0 ; j< files.length ; j++)
fileList.add(files[j]);
java.util.Collections.sort(fileList, new FileComp());//sorting by size
new Thread(new Runnable() {
public void run(){
for (int k = 0; k < fileList.size(); k++)//loop for queue {
File fname = (File)fileList.get(k);
String str=fname.getName();
log("Destination:" +" "+ dest);
log("Uploading Progress\nPlease Wait....");
result=doPost(fname,dest);//method for read file & send to servlet
String str2="Transfer apparently failed.";
String str3=result;
if(str2.equals(str3)){
Error(result);
else if(suspendflag==true){
File newfile =new File("d:\\DTMS\\Archives\\"+str);
fname.renameTo(newfile);
log("File" +" "+ str+" "+"Upload Completed !");
else if(suspendflag==false){
Error("** Transfer Suspended**");
}).start();
}catch(Exception exp)
Error("Error : " + exp.toString());
Regards
Bikash

Hi Chandan,
                    All the multiselection files are stored in it_tab( i:e file_table in method). you need to loop the every record to upload the data for selected files. please check the code Below...
DATA: file_str1 type string.
data: it_tab TYPE STANDARD TABLE OF file_table,
     wa_tab TYPE file_table,
       lw_file LIKE LINE OF it_tab,
       gd_subrc TYPE i.
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
window_title = 'Select only Text File'
default_filename = '.azt'
multiselection = 'X'
CHANGING
file_table = it_tab
rc = gd_subrc.
*READ TABLE it_tab INTO lw_file INDEX 1.
*p_file = lw_file-FILENAME.
Start-of-Selection.
loop at it_tab INTO wa_tab.
   file_str1 = wa_tab-FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     filename                      = file_str1
*    filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
   tables
     data_tab                      = it_string
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.

How can i fix my mac book pro. My safari crashes all the time, my screen will turn black for no reason, My iPhoto crashes during upload from my iPhone, I can't highlight anything and I can't drag anything.

Someone PLEASE help me! I cant figure out what is going on with my computer. I don't install anything weird, but my brother does. He's very good at computer tech stuff and is in I.T, but I cant help but blame him for all the problems my Mac is having. Nothing works like it should. My safari will randomally crash, my screen will randomally turn back, my iphoto will crash during uploading from my iPhone, I cant highlight anything, I can't drag anything. When I want to click on something, I have to click over and over again just for it to even register. I know everything is up to date and recently reset my PRAM. I'm running Lion and have a lot of room on my hardrive. I have an external harddrive and I'm wondering if I should just move all of my important files over to it and completly wipe out my computer's hardrive and start from scratch.

Some folks can't leave well enough alone, and insist on downloading all sorts of additional "stuff" that ends up making their Mac unstable.
Standard Mac OS X on properly-operating Hardware does not crash, unless you start installing too many add-ons.
You can run "just the basics" by holding down the Shift key at Startup. This does one pass of Disk Repair, then loads a minimal set of extensions, and comes up in Safe Mode. If it works OK that way, but crashes in "regular", it's the add-ons.
There ia another layer of add-on junk that can be added to Safari. If the only remaining problem is Safari crashing, those add-ons can be disabled as well.

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

My ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

http://support.apple.com/kb/HT1808

How To... Update Master Data during upload of transaction data

Can anybody let me know how this can be achieved.
I have datasource (Legacy not R3) where I am getting both master data and text for number of infoobjects.
I dont want separate datasources.
The datasource is actually transactional datasource.
I dont need text in the cubes or DSO I need the text tables of the infoobjects to be updated.
I could find this on SDN but do anyone have document based on the below link.I was not able to find it.
How To... Update Master Data during upload of transaction data
Thanks.

Dear Praveen
I guess yr req is demanding the knowledge of Data Unification and Synchronization whose scope is a bit outer the area of BW.( its MDM actually )
In BW we could very well fetch data out of different data sources (even across the different system) with no issues so why not u trying that. if there is any issue implementing that then please specify what kind of trouble you are interfacing...
I got the below link which may be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bd6389-0a01-0010-eb95-d45835d446a8

Facing problem during uploadation of Routing data using CA01-BDC - URGENT

Dear All,
When I am trying to upload Routing data using CA01 in the Table Control scenario, then I am facing problem as my last 2 records are not getting uploaded from my Test file.
For example, I am having 47 records in my Test File and after setting Default size parameters (to avoid screen resolution problem)
I have 15 table control line items data per page. The Page down logic ('=P+') is working fine, but my below BDC code failed to take
the remainder last 2 records from the Test File.
Analysis: When I am running my Call Transaction bdc in foreground, then the 1st page down occurs after 15th record, 2nd page down occurs after 29th record( as in Table Control 1st pages 15th record is coming on the Top of 2nd page). 3rd page down occurs after 43rd record
(as 2nd pages 29th record is coming on the top of 3rd page). In the 4th Table Control Page 43rd record of previous page is coming on top, and then its taking 44th & 45th records from the Test File and then it is triggering SAVE (=BU). Thus, our last 2 records
(i.e. 46th, 47th record) are not getting uploaded in the routing screen from our Test File.
If anybody has encountered this scenario previously, please help me URGENTLY in fixing the bugs here. Its VERY, VERY URGENT
FYI. For others 45 successful records already uploaded, all the screen fields values are coming properly in the routing screen, and here there is no issue.
Thanks very much
Thanks & Regards
Sudipta Project Lead
Volvo Client Location
I am pasting my BDC source code below:
REPORT ZRT1_UPLOAD_CA01_F
                       NO STANDARD PAGE HEADING
                       LINE-SIZE 255.
                        I N C L U D E S                              *
Include for Data Declarations
INCLUDE zrout_top.
Include for Forms
INCLUDE zrout_form.
INCLUDE zrout_include_f_ca01.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR <field>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Attaching F4 help with filename
PERFORM F1001_GET_F4.
           S T A R T   -   O F - S E L E C T I O N                 *
START-OF-SELECTION.
Perform to read the input file
PERFORM f_read_file.
Perform to fill the BDC data
PERFORM f_fill_bdctab.
               E N D   -   O F - S E L E C T I O N                 *
END-OF-SELECTION.
FREE: i_bdcdata,
        i_messtab,
        i_record.
x----
*& Include           ZROUT_TOP                                        *
                  D A T A B A S E    T A B L E S                     *
TABLES: t100.          "Messages
                D A T A    D E C L A R A T I O N S                   *
T A B L E    T Y P E S *****************************
For input data
TYPES: BEGIN OF ty_record,
        matnr(18), "Material Number
        werks(4),   "Plant
        verwe(3),   "Usage
        statu(3),   "Status
        arbpl(8),   "Work Center
        steus(4),   "Control Key
        ltxa1(40), "Description of Operation
        bmsch(13), "Base Quantity
        meinh(3),   "Unit of Measure
        vgw01(11), "Machine
        vge01(3),   "Unit of measure of activity
      END OF ty_record.
I N T E R N A L    T A B L E S ***********************
Internal Table for input file name
DATA: i_file_tab TYPE STANDARD TABLE OF sdokpath   INITIAL SIZE 0.
Internal Table for BDC Data
DATA: i_bdcdata   TYPE STANDARD TABLE OF bdcdata    INITIAL SIZE 0.
Internal Table for BDC Messages
DATA: i_messtab   TYPE STANDARD TABLE OF bdcmsgcoll INITIAL SIZE 0.
Internal Table for Input file
DATA: i_record TYPE STANDARD TABLE OF ty_record INITIAL SIZE 0.
W O R K      A R E A S *************************
Work Area for input file name
DATA: wa_file_tab LIKE sdokpath.
Work Area for BDC Data
DATA: wa_bdcdata LIKE bdcdata.
Work Area for BDC Messages
DATA: wa_messtab LIKE bdcmsgcoll.
Work Area for Input file
DATA: wa_record TYPE ty_record.
V A R I A B L E S ****************************
DATA: v_filename TYPE string,
      v_fnam(40) TYPE c.
DATA: wa_opt TYPE ctu_params.
C O N S T A N T S ***************************
CONSTANTS: c_werks TYPE rc27m-werks VALUE 'tp',
           c_steus TYPE plpod-steus VALUE 'PP01'.
*Selection Screen.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
          Input file name
            P_FILE TYPE rlgrap-filename OBLIGATORY. " DEFAULT 'C:\'.
SELECTION-SCREEN END OF BLOCK B1.
x----
*& Include           ZROUT_FORM                                       *
*&      Form f_fill_bdctab
      Form to fill the BDC Data
FORM f_fill_bdctab.
TABLES mapl.          "Assignment of Task Lists to Materials
DATA: l_cnt_item(3) TYPE n VALUE 1.    "Line item counter
DATA: first(3) TYPE n VALUE 16.    "Line item counter
DATA: next(3) TYPE n .    "Line item counter
DATA: lin(3) TYPE n .    "Line item counter
DATA: l_v_bmsch(13),   "Base qty
        l_v_meinh(3),    "Unit of Measure
        l_v_vgw01(11),   "Machine
        l_v_vgw02(11),   "Labour
        l_v_vge01(3).    "Unit of measure of activity
DATA l_v_nextline TYPE sy-tabix.
DATA wa_temp TYPE ty_record.
    Initialize Counter
      l_cnt_item = 1.
SORT i_record BY matnr.
LOOP AT i_record INTO wa_record.
AT NEW matnr.
    REFRESH: i_bdcdata,
             i_messtab.
    SET PARAMETER ID 'PLN' FIELD space.
    SET PARAMETER ID 'PAL' FIELD space.
    PERFORM f_bdc_dynpro      USING 'SAPLCPDI' '1010'.
    PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
Material Number
    PERFORM f_bdc_field       USING 'RC27M-MATNR'
                                    wa_record-matnr.
   Plant
    PERFORM f_bdc_field       USING 'RC27M-WERKS'
                                    c_werks.
    PERFORM f_bdc_field       USING 'RC271-PLNNR'
Check if routing already exits for the material
    SELECT * FROM mapl
                  INTO mapl
                            WHERE matnr EQ wa_record-matnr
                              AND werks EQ c_werks
                              AND plnty EQ 'N'.
      IF sy-subrc EQ 0.
        PERFORM f_bdc_dynpro      USING 'SAPLCPDI' '1200'.
        PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                        '=ANLG '.
      ENDIF.
    ENDSELECT.
    perform f_bdc_dynpro      USING 'SAPLCPDA' '1200'.
    perform f_bdc_field       USING 'BDC_OKCODE'
                              '=VOUE'.
Group Counter
    perform f_bdc_field       USING 'PLKOD-PLNAL'
Usage
    PERFORM f_bdc_field       USING 'PLKOD-VERWE'
                                    '1'.
Status
    PERFORM f_bdc_field       USING 'PLKOD-STATU'
                                    '4'.
ENDAT.
    PERFORM f_bdc_dynpro      USING 'SAPLCPDI' '1400'.
Check if page is full
    IF l_cnt_item EQ '16'.
    Page down
      PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                           '=P+'.
      l_cnt_item = 1.
ELSE.
PERFORM f_bdc_field       USING 'BDC_OKCODE'
                              '/00'.
ENDIF.
   CLEAR v_fnam.
Populate item level details
Work Center
    CONCATENATE 'PLPOD-ARBPL(' l_cnt_item ')' INTO v_fnam.
    PERFORM f_bdc_field       USING v_fnam
                                    wa_record-arbpl.
Control Key
    CONCATENATE 'PLPOD-STEUS(' l_cnt_item ')' INTO v_fnam.
    PERFORM f_bdc_field       USING v_fnam
                                    c_steus.
Description of Operation
    CONCATENATE 'PLPOD-LTXA1(' l_cnt_item ')' INTO v_fnam.
    PERFORM f_bdc_field       USING v_fnam
                                    wa_record-ltxa1.
Base Quantity
    CONCATENATE 'PLPOD-BMSCH(' l_cnt_item ')' INTO v_fnam.
    PERFORM f_bdc_field       USING v_fnam
                                    wa_record-bmsch.
Unit of Measure
    CONCATENATE 'PLPOD-MEINH(' l_cnt_item ')' INTO v_fnam.
    PERFORM f_bdc_field       USING v_fnam
                                    wa_record-meinh.
Machine
    CONCATENATE 'PLPOD-VGW01(' l_cnt_item ')' INTO v_fnam.
    PERFORM f_bdc_field       USING v_fnam
                                    wa_record-vgw01.
Labour
   CONCATENATE 'PLPOD-VGW02(' l_cnt_item ')' INTO v_fnam.
   PERFORM f_bdc_field       USING v_fnam
                                   wa_record-vgw02.
Unit of measure of activity
    CONCATENATE 'PLPOD-VGE01(' l_cnt_item ')' INTO v_fnam.
    PERFORM f_bdc_field       USING v_fnam
                                    wa_record-vge01.
      l_cnt_item = l_cnt_item + 1.
   CLEAR wa_record.
AT END OF matnr.
     PERFORM f_bdc_field       USING 'BDC_OKCODE'
                              '/00'.
      PERFORM f_bdc_field         USING 'BDC_OKCODE'
                              '=BU'.
     wa_opt-DISMODE = 'A'.
     wa_opt-DEFSIZE = 'X'.
     wa_opt-UPDMODE = 'S'.
    PERFORM f_bdc_transaction USING 'CA01'.
   Initialize Counter
     l_cnt_item = 1.
ENDAT.
ENDLOOP.
ENDFORM.                    " f_fill_bdctab
x----
*& Include           ZROUT_INCLUDE_F_CA01                             *
*&      Form f_read_file
      Form to read the file from presentation server
FORM f_read_file .
To get the file name
DATA l_v_file TYPE string.
l_v_file = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                = l_v_file
        filetype                = 'ASC'
        has_field_separator     = 'X'
      TABLES
        data_tab                = i_record
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        OTHERS                  = 17.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
ENDFORM.                    " f_read_file
*&      Form f_bdc_dynpro
      Form to populate BDC Tab for new screen
     -->fp_program   Screen program name
     -->fp_dynpro    Screen Number
       Start new screen                                              *
FORM f_bdc_dynpro USING fp_program fp_dynpro.
CLEAR wa_bdcdata.
wa_bdcdata-program = fp_program.
wa_bdcdata-dynpro   = fp_dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM.                    "f_bdc_dynpro
*&      Form f_bdc_field
       Insert field                                                  *
FORM f_bdc_field USING fp_fnam fp_fval.
IF NOT fp_fval IS INITIAL.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = fp_fnam.
    wa_bdcdata-fval = fp_fval.
    APPEND wa_bdcdata TO i_bdcdata.
ENDIF.
ENDFORM.                    "f_bdc_field
*&      Form f_bdc_transaction
      Call transaction and error handling
     -->fp_tcode   Transaction code
FORM f_bdc_transaction USING fp_tcode.
DATA: l_mstring(480),
        l_color         TYPE i,
        l_mode          TYPE c.
REFRESH i_messtab.
CALL TRANSACTION fp_tcode USING i_bdcdata
                   OPTIONS FROM wa_opt
                   MESSAGES INTO i_messtab.
Messages during upload
LOOP AT i_messtab INTO wa_messtab.
    CASE wa_messtab-msgtyp.
      WHEN 'S'.
        l_color = 5.
      WHEN 'E'.
        l_color = 6.
      WHEN 'W'.
        l_color = 3.
    ENDCASE.
    FORMAT COLOR = l_color.
    SELECT SINGLE * FROM t100 WHERE sprsl = wa_messtab-msgspra
                              AND   arbgb = wa_messtab-msgid
                              AND   msgnr = wa_messtab-msgnr.
    IF sy-subrc = 0.
      l_mstring = t100-text.
      IF l_mstring CS '&1'.
        REPLACE '&1' WITH wa_messtab-msgv1 INTO l_mstring.
        REPLACE '&2' WITH wa_messtab-msgv2 INTO l_mstring.
        REPLACE '&3' WITH wa_messtab-msgv3 INTO l_mstring.
        REPLACE '&4' WITH wa_messtab-msgv4 INTO l_mstring.
      ELSE.
        REPLACE '&' WITH wa_messtab-msgv1 INTO l_mstring.
        REPLACE '&' WITH wa_messtab-msgv2 INTO l_mstring.
        REPLACE '&' WITH wa_messtab-msgv3 INTO l_mstring.
        REPLACE '&' WITH wa_messtab-msgv4 INTO l_mstring.
      ENDIF.
      CONDENSE l_mstring.
      WRITE: / wa_messtab-msgtyp, l_mstring(250).
    ELSE.
      WRITE: / wa_messtab.
    ENDIF.
    FORMAT COLOR OFF.
ENDLOOP.
SKIP.
ENDFORM.                    " f_bdc_transaction
FORM F1001_GET_F4.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            PROGRAM_NAME = SY-REPID
            DYNPRO_NUMBER = SY-DYNNR
            FIELD_NAME    = P_FILE
       CHANGING
            FILE_NAME     = P_FILE
       EXCEPTIONS
            MASK_TOO_LONG = 1
            OTHERS        = 2.
IF SY-SUBRC <> 0.
File is not selected
   MESSAGE I000 WITH TEXT-M01.
ENDIF.
ENDFORM.                    " F1001_GET_F4

Sudipta,
Would request you to post this to ABAP-Forum for Immediate response.
I had this problem, but the ABAP guy did something to correct this...it was more of screen resoultion difference between the recorded system and uploading system. Please try to use the same system which was used to record and try.
Regards,
Prasobh

When making a photo book, my iPhoto freezes during uploading the book to the store after assembly. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large images. How can I get past this?

When making a photo book, my iPhoto freezes during uploading the book to the storey. I have attempted this 4 times now and I don't know what to do! I know the file size is massive due quantity of large image files, but I don't want to reduce the image file size and compromise quality in the book. How can I get past this?
My macbook air is os x 10.9, using iPhoto 11 9.5 (902.7).

Try Old Toad's solution here: See Re: iphoto : upload impossible to print a book
Try to boot into Safe Mode and order this way, or sign into a different user account and try to order as a different user.
Léonie

IPod contines to restart during upload

Similar Messages

Maybe you are looking for