IPod continuously flashes "Do not Disconnect" even when set to automatic.

iPod continuously flashes "Do not Disconnect" even though iTunes says "Update is Complete" and even when set to automatic update. It mounts both in iTunes and on the Desktop.
Any suggestions on how to fix this?
I have alredy tried rebooting both the iPod and computer.
Thanks.

Patrick,
Welcome to the discussions.
Sounds like you've got Disk Use enabled. Try unchecking the Box "Enable Disk Use" under iTunes>Preferences>iPod Tab.
JC

Similar Messages

IPOD *ALWAYS* flashes DO NOT DISCONNECT

IPOD ALWAYS flashes DO NOT DISCONNECT when connected to my computer. How do I fix that??

Personally I would, from the information you have given, reset my iPod and/or restore it and then try it again. If this still happens repeat the process but re-install iTunes and QT.
I know this is not a quick resolve but, personally, these things must be done before doing much else since it could be a number of reasons this could be happening - try the more obvious approach first (if you haven't already). If this still does not work then I will not be able to help, there are others here that certainly know more than I do - failing that visit an Apple Store if possible since I would have a guess at stating its more an iPod problem than the software on your computer.

Ipod mini flashes Do Not Disconnect forever

It will work when disconnected, but when you attach to computer it just flashes do not disconnect. I've reset it, I've restored it so there's nothing even on it, but plug it is and that's what it will say until you just take it off anyway. The computer says it's updated - Please help!

If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked “enable disk use”, remove it and your iPod should automatically disconnect after it’s finished transferring music.

5th Gen iPod freezes on "Do Not Disconnect" screen when connected to Mac

My iPod freezes on the "Do Not Disconnect" screen (partially backlit) when I plug it into my computer. I have a G4 eMac with standard USB connections. The ipod firmware is up to date.
This freeze doesn't occur ALL the time....just occasionally. The iPod does not appear on my desktop or in iTunes when this happens. I have to wait until the iPod discharges its battery completely before I can use it again (this sometimes takes a couple of days!).
Does anyone have any ideas? Or is anyone else experiencing this?
Thanks....
G4 eMac 700mhz Mac OS X (10.4.9) 768 MB RAM
G4 eMac 700mhz Mac OS X (10.4.9) 768 MB RAM

Thanks for the replies.........I can't seem to find a solution to this....its annoying to say the least. Its just happened again this morning, though it's successfully sync'd on the last few occasions....it seems to be quite random.
One thing I've noticed is that it synced OK when iTunes wasn't open when I plugged it in. It appeared on the desktop, then I opened iTunes. This morning though it froze when iTunes was already open, so there may be an issue with iTunes (I updated this weekend to see if it was any different with the new version). I guess this will happen if you've got the ipod set to open iTunes automatically when connected too.
So, no solutions as yet.......I'm gonna get onto Apple to see if they have any answers. I'll get back to you all on this one.
PS: why no firewire capabilities on the new ipods?
G4 eMac 700mhz Mac OS X (10.4.9) 768 MB RAM

Adobe Flash does not work, even when enabled.

The Adobe Flash plugin doesn't seem to work. Well, it's there but doesn't show any Flash content. In other words, it just shows the background of the site (or blank). Sites are able to detect Flash if it's disabled. No other addons or plugins are interfering with it. I can't update Firefox or Flash.

Hi,
In summary
* check IE works with Flash content at present
* download and install Firefox 14+
* uninstall Flash 11.3 and install Flash 10.3
* post back with how you get on
* note these are temporary workarounds until developers fix the problems.<br> Whilst these problems exist upgrading FlashPlayer as advised by Adobe Flash, or by Firefox's pluginchecker may not be a good idea.
First of all I note you seem to be using the old Firefox 5. That is no longer supported and is not secure. I would suggest you update to Firefox 14 either by using the menu option
* Help -> About Firefox ->Upgrade
* or by visiting http://www.mozilla.org/en-US/firefox/all.html
Secondly note there may be some problems with use of the current Flash 11.3 versions. Some Firefox users are needing to uninstall tht and downgrade to Flash Player 10.3 (older but secure) or Flash Player 11.2
This problem has had developer attention for a few weeks but there is no sign of a proper solution yet. Note at least some of the problems relate to a new security feature ''protected mode'' used by FlashPlayer on windows systems above Windows XP.
As a Windows user you may wir=sh to check if FlashPlayer works ok on Internet Explorer ? It should do. (But you may have problems if you follow the official advice to use an Adobe uninstaller, you may need to review the IE installation of FlashPlayer afterwards.)
Note the fact that your problem relates to FlashPlayer 11.3 is at the moment no more than a guess, based on the number of known issues at present (and the sytsem information aside that indicates you are using flash 11.3).
The current standard official advice is :
Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
--------------------------

Ipod flashes "do not disconnect", not recognized in itunes source - Help!

My ipod (2nd generation) continues flashes do not disconnect when connected. Recently upgraded to itunes 8. Have tried 5Rs including restarting service, renaming drive, reinstalling itunes, etc.
Also ran diagnostic, all test pass except sync test. Please help, any thoughts?

hi, thanks for responding so quickly. here's what happened:
1. i connected the ipod to my laptop and the DND (do no disconnect) message flashed on the ipod screen.
2. as u suggested, i clicked on itunes and tried to change its setting to automatic..it was on automatic already.
*laptop showed update was completed but DND message still flashes on ipod. I decided to check if everything else was working.
3. downloaded a song and when it was done i checked my itune page and library...song wasn't there.
4. i clicked file, add file to the library, browsed and found the song in documents/music/itunes.
5. clicked open then updated the ipod.
*update completed, DND shows on ipod, clicked eject, took out the cable.
6. menu showed on screen, all other songs were there expect for the last one i tried to transfer.
i don't know what to do now...?? could it be broke?
ipod Windows XP

Continously flashing "Do Not Disconnect"

Many times that I try to connect my iPod, the computer will not recognize that it is connected but the "Do Not Disconnect" screen will keep flashing and never stops, I looked for help on this topic, and it told me to unplug it, and reboot it, I did what it said, and my iPod was fine. Again, I tried to transfer my new music onto my iPod and it did the same thing, is there any way that I can stop my iPod from flashing "Do Not Disconnect" continually and just transfer my music?

Welcome to Apple Discussions!
Along with that, is everything updated?
http://www.apple.com/ipod/download
http://www.apple.com/itunes/download
You may also want to try resetting while the iPod is plugged in...
http://docs.info.apple.com/article.html?artnum=61705
Finally, this article offers some more ideas...
http://docs.info.apple.com/article.html?artnum=61711
btabz

IPod flashing "Do Not Disconnect"

My 30GB ipod has been flashing "Do Not Disconnect", with a red crossed-out circle. I placed it in my dock at lunch today to recharge it, and I just retunred home to see it flashing. Itunes says the sync is complete and all software is up to date. I recharged my brother's ipod last night, and everything was normal. Can anyone please help me?
Thanks!
Michael

Hi Michael,
The "Do Not Disconnect" screen will continue to stay displayed on your iPod, simply because you have Disk Use enabled (when automatically syncing iPod with iTunes).
If you are automatically syncing songs to your iPod, then disable disk use.
For more info, see this:
Enabling Disk Use for iPod
For details on safely disconnecting an iPod, see this:
Safely Disconnect iPod
-Kylene

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS.

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?

iOS: Troubleshooting Messages

Flashing 'Do Not Disconnect' screen stays on indefinitely

Flashing 'Do Not Disconnect' screen stays on indefinitely when connected to computer. What should I do?

If you have your iPod set to transfer your music manually, then that “do not disconnect” message will continue to be displayed on your iPod until you manually eject it.
You can do this by clicking on the little eject icon next to the iPod listing in the source window of iTunes, or right click on it and select “eject”. There is also an iPod 'eject' icon in the lower right hand corner of iTunes. Another way would be to use the “safely remove hardware” icon in the system tray next to the clock (looks like a grey rectangle with a green arrow above it). Click on this then select your iPod. Or through Windows, select start/my computer, right click on the iPod, select eject.
If you have your iPod set to automatically sync with iTunes version 7 or later, connect the iPod and when you see the summary screen, uncheck the box marked "enable disk use".
If you are using an earlier version of iTunes, right click on the iPod in the source list, select options and uncheck the same box.
In future your iPod should automatically disconnect after it’s finished transferring music.

Ipod frozen on Do Not Disconnect

I have connected my ipod to my pc to update, which it has done, this is not the first time is has been connected to this computer. iTunes sayd that the update is complete but my ipod say do not disconnect. When i press eject iPod from iTunes it says that "the iPod cannot be ejected because it containts files that are in use by another application" as far as I can tell no over programs should be using it. I've even tried safely remove hardware but it says the device is in use.
Help please.

Thanks to you both - I seriously can't live without the thing - so you can imagine my relief that it worked!:-)
Incidently - even though my ipod shows as connected in my itunes and i can install music on it - I haven't registered it with ipod updater and such on my laptop - its just 'ipod' - for future problems it's probably a good idea for me to register it, or does it not make a difference? I have it registered on my Microsoft laptop (which i rarely use) - but that shouldn't make a difference to re-installing ipod should it?
Ash

My MacBook Pro will not powerup (even when connected to power supply).

My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy

Flashing do not disconnect symbol

i plugged my ipod into the usb (regular, not 2.0) and it just keeps flashing "do not disconnect" with the red symbol. it appears the ipod got charged. nothing happens when i hit menu, or any other button. when i go to the button on bottom of screen it just says "apple ipod usb device cannot be stopped right now. try stopping it later" ok hopefully someone can helpme (please?)

Hi coffeandtimbits,
Let's try resetting your iPod:
First, toggle your iPod's "Hold" switch back and forth a couple of times. (leave it on the white side of the switch, which is the Off position)
Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
After your iPod displays the Apple logo as it resets, it should display the normal main menu for a couple seconds, then flash back to "Do Not Disconnect".
Open up iTunes, and see if it syncs from there. If it does, then, when the sync is complete, click on the little arrow next to your iPod's name in the Source List (the left display panel) of iTunes.
Hopefully, at this point, your iPod will safely eject, and show the Main Menu screen. It is does this, then it should be fine to unplug it from your computer.
If your iPod isn't recognized in iTunes, or you can't successfully eject it from there, then this is probably the best thing you can do to safely disconnect your iPod (withOUT unplugging it when it says not to):
Close all applications that are running on this user account, and other user accounts on your computer, as well.
Then, turn off your computer (with your iPod still connected).
After the computer has fully shut down itself (the HD quits spinning, etc), unplug your iPod from your computer.
-Kylene

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

Graphics convert but not text even when ocr is disabled

graphics convert but not text even when ocr is disabled

Hmmm... I seem to have found the plist file that is doing it. I was looking at /Library/Application\ Support/Apple/Remote\ Desktop/ before... looks like /Library/Preferences/com.apple.ARDAgent.plist is the culprit.
This plist is a binary, so I had to use plutil to convert to xml in order to make it human readable. I wonder if I can just hack this file up a bit and re-deploy it to each machine. Or I wonder if it would re-build if I simply remove it from each client. I will need to test to find out, seeing as though the task servers are listed in it, probably not a good idea to remove it all the way.

IPod continuously flashes "Do not Disconnect" even when set to automatic.

Similar Messages

Maybe you are looking for