Ipod continuously turns on then off and makes clicking sound

Just today, after plugging my ipod into my computer and transferring voice memos, I unplugged my ipod and as soon as I did that, it shut down and began its continuous loop of turning on and off. It never fully boots up. Can anyone help me out with what might be going wrong

give it a search, sometimes you have to look for a day or two, but you will find one. Also do a search on google. You can find them at parts houses like ifixipodsfast.com for 120 for a 30 and 165 for a 60 gig. But do some searches and go here for the tutorial on how to change it. It is really not that hard at all.http://www.ipodhowtovideo.com/video/
I have had my video apart twice and two of my friends for screen and battery replacement. I have had the hard drives out and can testify that it is really not that hard. Just be careful with the ribbon cables.

Similar Messages

  • Why does my iPod 4g turns on then off while on the charger?

    My iPod 4g will show the Apple Sign then shut off and repeat. Why?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I recently upgraded toSnow Leopard, after that I was given a continual message that I had to reinstall my Internet Cleanup. So I did. Then I turned my computer off and now it will not turn on at all. Help!

    I recently upgraded toSnow Leopard, after that I was given a continual message that I had to reinstall my Internet Cleanup. So I did. Then I turned my computer off and now it will not turn on at all. Help!

    See if your Mac will boot from the install DVD.
    Then uninstall Internet Cleanup.
    Allan

  • My new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks

    my new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks. Was not connected to the computer when ipod died.

    I have not heard of a good reason for this to happen or how to fix. 3 days later my screen lights up and says to connect to charger.... so its back "for now". Best music player on the market when it works.

  • I accidently  pressed the home button, sleep/wake up button and the up volume button on my ipod touch 4 gen and it turned on and then off and wont turn on. can someone please help?

    I accidently  pressed the home button, sleep/wake up button and the up volume button on my ipod touch 4 gen and it turned on and then off and wont turn on. can someone please help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done.

    why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done. it has been this way for the last 2/3 days now and i have uninstalled and reinstalled it but it doesnt work

    Hello there, bobbiefromIRL.
    The following Knowledge Base article goes over some great steps for troubleshooting your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

    I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
    What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
    From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
    Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

    sydababy wrote:
    and then deleting them off of my computer.
    BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
    Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
    The number of people who have experienced terror by having a single external HD backup is enormous.  One failure that WILL HAPPEN, and kaput,......all gone!
    Dont do it, its all about redundancy, redundancy, redundancy.
    follow here:
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    Deleting them off your computer is fine....having only ONE copy is extremely BAD.
    The Tragedy that will be, the tragedy that never should be
    Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
    Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
    Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
    Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

  • So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    So randomly my ipod crashed and when i turned the ipod on again it was all white and blurred. Part of the screen is up to speed but the other half is slow. Already tried turning it completely off and restoring it on the computer

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like resetting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?

    My dad gave me an iPhone 3G to use as an ipod touch but it's not picking up wifi. ive tried everything to like reseting the network settings turning wi fi off and on mutable times, turned the phone off on and on. What do i do?
    the iphone never really picked up wi fi when it was used as a phone and it didnt really matter because he had unlimited internet but it still wont go on wi fi. does any one know why it is doing this?
    The iphone works fine other wise i just really want it to go on wi fi. We just got new wi fi too and all of our other apple products go on the wi fi just fine. I dont know if its because its newer or what but my brothers 1st gen ipod goes on wi fi just fine.
    The iphone is updated to the latest ios too
    WHAT SHOULD I DO!!!!!!!!!!!???????

    This might help
    http://support.apple.com/kb/ht3406

  • I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.

    I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.
    Why is this?  My husband's 4s is still on IOS7 and it still connects automatically.

    I do not know if this will help.
    For a limited time Apple will allow you to downgrade to 7.1.2.  Hurry do not wait.
    See brownox second post here:
    Are there known problems with hdmi screen display and iOS 8?
    and
    http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/

  • Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty.

    Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty. It now has a blank bar under the launch pad and no matter how many times I try re-downloading it or restarting my computer it does not work. I use too play starcraft and other games on this computer although new patched/updates have made it that I can no longer do that now. Really frustrating having to deal with this especially after buying this computer upfront and now out of warranty.

    Go to your Applications folder and find a file called "Install OS X Mavericks".  Send it to the trash and delete it.  Then try the download again.

  • TS2771 i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO

    i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me

    it still blinking with the apple sign

  • My ipod touch 5 turn its self off and wont come back on please can someone help

    my ipod touch turned its self off Last night had half of battery left and I cant turn it back on please can someone help cant live with out it

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple, let go and let it reboot and see if it comes back

  • HT200150 I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

    I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.

    Connect your phone to itunes on the computer you use itunes on and open up itunes.

  • Since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says "Wi-Fi: Looking for networks- and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution?

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

    since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.

Maybe you are looking for

  • How do i send the username and password to yahoo web page through url

    how do i send the username and password to yahoo web page through url i.e as Query string so that my account in yahoo will open...

  • Report Taking long time in QA system

    Gurus, I have developed a report which works fine in dev.Though in QA system its performance is not okay.Please go through th ecode and help me through. TABLES: REGUH,BSAK,BSIS,LFA1,LFB1,BSAS. ****    Internal table declaration starts. ***    To Stor

  • Technical Upgrade from R/3 4.6 to ECC 6.0

    Hi all i have a query regaring system upgrade: Currently i have 2 systems R/3 4.6: Development(D1), Quality(Q1). Now this systems needs to be upgraded to ECC 6.0. First the D1 is going to be copied to a new development(D2). Then D2 will be upgraded t

  • SAP BO UNIVERSE AND REPORTS

    Dear all,      I am a beginner to the Business objects.  I want role and responsibilities of BO projects.  And I want common errors of webi reports and crystal reports and sap universe creation and non sap universe creation.  Thanks, Baskaran.

  • Populating values in dynamically generated internal table

    Hi, We can generate internal tables dynamically and also populate them with values from database.But is there any way to populate the dynamically generated internal table(has 2-3 selected fields) with values from another internal table(has all fields