"iPod could not be upgraded because the firmware file could not be found"
Can someone please help me?
I've been trying to update my iPod for a few days and I keep getting the same error message. I've even tried re-installing iTunes but that doesn't seem to help.
I really don't know what to do now, I don't even know if there is some software I should download to fix this, if it can be fixed. Does this have anything to do with the fact that I have Windows instead of a Mac?
Please help me out, I'd appreciate it.
Thanks
Zevoneer wrote:
Have you had a chance to look at this troubleshooting page? It may be of some help: What to do if iPod can't be updated because the firmware file was corrupt or not found
Darn it! I seriously need to improve the "search" skills.
Thanks.
Similar Messages
-
IPod could not be restored because the firmware file could not be found
Initial problem was no audio and skipping through songs at a rate of about 1 song per second.
Tried the 5 R's and that didn't help.
Installed iTunes 7 and then it wouldn't recognize the nano. Followed Apple's instructions when iPod not recognized, including uninstalling iTunes, uninstalling latent update installers, deleting the iTunes directory, clearing the recycle bin, deleting temp files, etc. Then reinstalled iTunes 7,
Plugged in my nano and Got the message, newer version of iPod software available, update software (version installed was 1.1.1 and newer version available was 1.2)? Clicked ok and that was the start of my troubles. That process failed and suggested that I restore to factory defaults (not exactly what I wanted to do, having to reload my songs, but went along).
Did a restore to factory settings and now get the message
The iPod could not be restored because the firmware file could not be found.
Anyone got any ideas how to update the firmware? I'm hopeful that a file can be downloaded to do this rather than sending in the nano to have it updated.
<opinion on>
After an hour of updating software and a couple of hours of reading the forums looking for the answer, my eyes hurt, it's 2:30am, and I'm frustrated to the point of throwing this in the trash.
My kids have a shuffle and a mini and I've updated software on both with no problems before. If I realized I would have to become a system admin for iPods, I would never have invested.
<opinion off>Welcome to Apple Discussions!
Take a look at these two articles. The error messages are not the same, but they may help...
http://docs.info.apple.com/article.html?artnum=304309
http://docs.info.apple.com/article.html?artnum=301267
If not, post back.
btabz -
iPod version shown in iTunes as "4.3.4" (not listed in the OS drop-down associated with setting up this post. Appeared to download the update OK but as soon as it went to install it came up with "The iPod "xxxxx" could not be updated because the firmware file is not compatible" Why and what do I do now? I'm pretty sure it was trying to install 5.1.1
- Are you updating clicking on the update button in iTunes?
Try a reset. Nothing is lost.
- Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try deleting file and try again. It is located:
IPSW file location for Mac and Windows -
My iphone 5s and model A1457 and even after i downloaded the IOS 7.1,2 itunes get me error "the iphone could not be updated because the firmware file is not compatible"
some people saying that u cant get back and other saying yes u can
i wonder if i still can and how to avoid that error
IOS 8 Drain battery like **** -.-" & wireless not working well -.-", that's so annoying ...
(if someone got a solution, i would appreciate it, Thx in advance)You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing! -
Problem: could not be updated because the firmware file could not be found
Hello, this is the same topic i have write in French. I have a problem with my ipod nano silver 4go, when i try to update my firmware, this message apears: "the ipod could not be updated because the firmware file could not be found" does someone know about this problem? Please excuse my english
Hey, i tried this, twicebut after iTunes downloaded the update, it still says "firmware file is corrupt" even after i have deleted the folder. Im on a windows operating system (my friends - GO MACS!!) and it wont work. Im trying to fix this for my friend, i was considering just formatting itto FAT32 with the explorer thingy. but that might make iTunes not recognize it. Any advice would be benificial!!
-
HT201210 my ipad could not be restored because the firmware file is not compatible
my ipad could not be restored because the firmware file is not compatible
what can i do???iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
HT201210 could not be updated because the firmware file is not compatible
trying to update iPhone 4 so blue tooth may work in the car.
Version 4.3.5 ( 8L1 ) displayed under about.
Moden Firmware is 04.10.01
Any help would be appreciated.
could not be updated because the firmware file is not compatible appears after waiting 70 min for my computer to down load OS 5.1?Do you have iTunes 10.6.3?
If not, update iTunes first then try again. -
Just registered iphone 4s and attempted to run the first update to 5.0.1...message "could not be updated because the firmware file is not compatible." What needs to be done?
Check out this article, especially #4: Security Settings: http://support.apple.com/kb/TS1275
-
what to do when a error message says could not be restored because the firmware file is not compatible
Were you updating/restrore via the Restore/update button in iTunes?
Try deleting the existing ufirware file and try again
It is located here:
IPSW file location for Mac and Windows -
The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do? I just bought my iPhone yesterday and i can't update my software from 5.0 version 9A334) to 5.0.1 because the firmware(1.0.11) is not compatible.
dear friends
im experiencing the same problem rite now. i just bought a 4s for my wife yesterday. when i tried updating the ios to 1.0.5 directly from the phone, it showed - 'Unable to Check for Update. An error occured while checking for a software update. and when i tried updating it via itunes, i got this msg - The iPhone "xxx iphone" could not be updated because the firmware file is not compatible.
my internet connection is perfectly ok here. can anybody help me on this?
Thank you -
IPad could not be restored because the firmware file is not compatible.
Hi, i have the latest 3rd gen iPad 32GB and iTunes 10.6. I have the IOS 6 beta downloaded on my windows laptop. I had someone add my UDID to there apple developers acount. However when i press Shift+Restore and select the beta file a i get an error sayng 'iPad could not be restored because the firmware file is not compatible.' Has anybody got any idea on how to restore my iPad to the IOS 6 beta file i have downloaded?
Thanks in advanced
Joseph.You should ask this question in the Apple Developer Forums
Since iOS 6 is not officially released nobody else can help. -
The iphone counld not be restored because the firmware file is not compatible, How to fix?
whar i doing plz help me
-
I was syncing my iPod and got the message that an update was available. I downloaded the update and just as it was almost finished, I got an error message. It couldnt' update my iPod because the "firmware file is not compatible." What's up with this? I've never had any problems before with this iPod or with my iPhone 4S before this.
Update your iTunes to latest version.
Try restoring your phone in DFU Mode, if that doesn’t work then try downgrading your iTunes back to iTunes 8 and try again. -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
Iphone can not be updated because the firware file is mot compatible...
This is the message i have received when I wantted to update my Phone 4...any clues?
Thank you!Try a manual install, as outlined in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
HBO in perpetual buffering after silverlight update
Hi all. I suddenly find myself unable to watch videos on HBO Go when I have watched 8 episodes in the past week with no problem. There are only two things that have changed from my last viewing to the one I am attempting: 1) I updated to the latest
-
Mac Mini Not Detecting Ethernet NIC
I have a weird one which I hope you can help me with. I have a Mac Mini SL server which operates as a DCHP and netboot server. Yesterday it stopped detecting its ethernet card which was resolved by a reinstall but when I started it today the problem
-
S10e -- Can I install Windows XP onto my Linux-Netbook and same way Linux on Windows Netbook?
Hello all, I wanna buy a S10e and I still have one question: Can I install Windows XP onto my Linux-Netbook and same way Linux on my Windows Netbook? I wanna use Suse for all my net applications and still wanna Windows for just old games running on
-
Hi Guys, I have raise a doubt about null values in the 0requid. Currently, i have a cube that have been load, rollup and collapsed till a specif date and afterward only rollup have been done. In adition, the loads are deltas from an ods to this cube
-
My account seems to not exsist today
I bought a new I Touch- uploaded it and used it for 2 days. Now after getting a Itunes card my account will not come up. It keeps taking me to the download screen. So I have downloaded a newer version but still no library or even aknowledgement of my