IPod crashed during updater - Won't start, weird icon

Hi!
I attached my iPod to my computer this morning to put more tunes on it. The computer recognized my unit, but told me I needed to update the software, so I did. After I clicked on Update, I was told to plug it in to an outlet to complete the update. Once I did that, the apple logo showed up and then I saw a new icon -briefly- that looked like it was directing me to connect to USB. I cannot find this icon in ANY troubleshooting or technical materials.
Now, my iPod won't start. I did the 5 "r" and tried to manually reset 8 times. It still won't start!!!
Help, please!!!!!!

If you have a FireWire cable, you can try starting up your Mac in FireWire Target Disk Mode. (Hold the "t" key down at startup.) Then plug your Mac into hers with a 6-pin to 6-pin FireWire cable. Your hard drive should appear on her Desktop. Then you can use her Disk Utility to verify/repair your hard drive. Note that it would be best if she was running the same version of Mac OS X that you have installed on your computer. For example, you don't want to try to repair a Mac OS X 10.4.x hard drive from a Mac with Mac OS X 10.3.x.
You can find out about FireWire Target Disk Mode here:
http://docs.info.apple.com/article.html?artnum=58583
-Doug

Similar Messages

  • Ibook won't start - weird icon

    My ibook froze and when I rebooted it, the screen was blank. In the center was a small icon of a folder and a ? mark was flashing on and off with the finder icon (inside of this folder icon) as if it can't find the hard drive? The fan (or hard drive?) spins and it sounds stuck for a few seconds before that icon appears and no other noises are made. I've never had problems before and I'm studying abroad for another month in Bulgaria so going into a store or re-putting in my cds or even calling apple wouldn't work for me for right now. Any other suggestions? If not, what can I do when I'm home in the States in a month?
    ibook g4    

    If you have a FireWire cable, you can try starting up your Mac in FireWire Target Disk Mode. (Hold the "t" key down at startup.) Then plug your Mac into hers with a 6-pin to 6-pin FireWire cable. Your hard drive should appear on her Desktop. Then you can use her Disk Utility to verify/repair your hard drive. Note that it would be best if she was running the same version of Mac OS X that you have installed on your computer. For example, you don't want to try to repair a Mac OS X 10.4.x hard drive from a Mac with Mac OS X 10.3.x.
    You can find out about FireWire Target Disk Mode here:
    http://docs.info.apple.com/article.html?artnum=58583
    -Doug

  • Ipod will not restore crashed during update

    ipod crashed on update and will not work. it said to do a restore but I have tryed 2 times and both times the restore didn't work

    I just did the install of 2.0.02 last and I had one dickens of a time restoring my library. Here is what happened to me. Right before doing the update it tells you that all of your music, videos etc.. will be removed from the Ipod Touch once the update is done installing. So I found a DVD and burned my library to it. Then I went ahead and did the install. It clean my Ipod Touch clean, but my iTunes library was still intact so I thought all will have to do is resync it but that didn't work. I tried and tried. I disconnected my external HD. Oh yeah by the way this is a new computer that I just bought and last night was the first time I used iTunes on it so I had to populate my library using iGadget.
    Anyway, I realized that I didn't have manually manage my iTunes library unchecked I unchecked it and it began to sync the back up copy I had of my library. Did either of you back up your library before installing 2.02? Do you have a place where most of your music is stored outside of iTunes? You cannot have Manually manage library checked it won't restore if you do. Be aware though 96% of my cover art was gone with this restore. How annoying. I don't know if this is the information you were looking for but I hope I have been able to shed some light on the issue.

  • TS3694 my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    worth looking at for the future to understand backing up etc

  • Refurbished iPod touch 3rd gen won't start.  Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help,

    Refurbished iPod touch 3rd gen won't start.  Just got it today to replace my broken one. It freezes at the screen with the apple logo, then flashes off and tries to restart again. Help!

    I have tried holding the power home button but all that does is turn it off. When I try to start it again it goes into the same loop.

  • Internet Connect crash/Software Update won't open

    I have a 500mhz G3 slot loading iMac running 10.3.9
    About 2 weeks ago, after waking FrankenMac up from sleep mode, I noticed the Airport status symbol failed to appear in the menu bar (next to the volume/date&time etc).
    Looking into my Network settings revealed that I was indeed still connected to the internet, via my Airport, all systems go. However, I noticed that "show airport status in menu bar" was unchecked, so I checked the box. Which apparently did jack squat b/c there's still no icon.
    For the last couple weeks, as long as I've been connected to the internet, I could really give a flying flip about whether the airport status icon is there or not. I mean, seriously. I know this computer is a little old so why rock the boat on something trivial?
    Until today. Today I was determined to figure out where the icon is, why it went away and if there are any other underlying problems.
    I started first with Internet connect. Applications->Internet Connect, clicked on the purple IC button, only to have it launch in the dock, bounce once, then quit.
    _A crash log shows:_
    Host Name: Handlevandal's-Computer.local
    Date/Time: 2008-06-18 09:13:15 -0400
    OS Version: 10.3.9 (Build 7W98)
    Report Version: 2
    Command: Internet Connect
    Path: /Applications/Internet Connect.app/Contents/MacOS/Internet Connect
    Version: ??? (???)
    PID: 437
    Thread: Unknown
    Link (dyld) error:
    dyld: /Applications/Internet Connect.app/Contents/MacOS/Internet Connect truncated or malformed library: /System/Library/PrivateFrameworks/InternetConnect.framework/Versions/A/Internet Connect (file is empty)
    I attempted to open Software Update next to see if there was something critical (ha!) I might be missing. Apple menu->software update and it was a repeat performance of Internet Connect, except this time I wouldn't even get so much as the Software Update icon in the dock. The dock would move everything to the left, as if it was going to open, then....nothing.
    *Software update was working as of 6/14*, when I updated (perhaps foolishly) to Quicktime 7.5.
    _Crash log shows:_
    Mac OS X Version 10.3.9 (Build 7W98)
    2008-06-18 13:56:17 -0400
    2008-06-18 13:56:19.213 SystemUIServer[200] * -[NSBundle load]: Error loading code /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/Cli entController.bundle/Contents/MacOS/ClientController for bundle /System/Library/PrivateFrameworks/Apple80211.framework/Resources/ClientControll er.bundle, error code 1 (link edit error code 1, error number 88 (dyld: /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer truncated or malformed library: /System/Library/PrivateFrameworks/InternetConnect.framework/Versions/A/Internet Connect (file is empty)
    2008-06-18 13:56:19.214 SystemUIServer[200] Error loading AirPort Menu Extra: Couldn't initialize shared Controller
    2008-06-18 13:56:19.227 SystemUIServer[200] failed to load Menu Extra: NSBundle </System/Library/CoreServices/Menu Extras/AirPort.menu> (loaded)
    dyld: /Applications/Internet Connect.app/Contents/MacOS/Internet Connect truncated or malformed library: /System/Library/PrivateFrameworks/InternetConnect.framework/Versions/A/Internet Connect (file is empty)
    2008-06-18 13:58:33.684 System Preferences[338] Warning: TIFF image with unknown extra samples assumed to have unassociated alpha. RGB values have been premultiplied. Use tiffutil -cat to fix.
    This ridiculously long post boils down to 2 questions, really.
    • Any ideas why Internet Connect and Software Update won't open and how to fix?
    • Where in the world is my Airport status icon? (not that it matters since I'm connected to the internet, but doggone it!)
    I've run Disk Utility, repaired permissions and the HD checks out fine. I'm just at a loss (not surprising, given my limited amount of fix-it-yerself knowledge)
    Should I just put up, shut up and be grateful that these problems, while aggravating, aren't majorly disrupting my life?

    Okay no worries, can't find where to delete this post...

  • Crashed during update

    Aaarrrgghh
    2008 macbookpro, 4gb, lion OSX
    Just ran software update, found new iTunes and safari, will ned restart. Set it off uploading, downloaded software, and was in the middle of the upgrade screen when the screen went black. Hadn't noticed it, but probably after half an hour of inactivity, decided to power off the book.
    Now, it won't start up. HELP. Need help as am going to give ot daughter as present, but really need to get it open to care her accounts etc.
    When it starts up, I can hear the HD drive spinning, but screen remains black. No 'dong' on start up,  and sits there with black screen.
    Have looked in forums, can't see an similar hence ned help. Have reset SMC as found that somewhere, nothing.
    Please can anyone suggest what to do? Have even put the install disc in the pro, held C and restarted it, but nothing, now cannot get the DVD out!!
    Please, ay suggestion
    Matt

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • IPod crashes during Restore! Critic!

    Hi,
    Few months ago I used to transfer media to my iPod from a Mac till this week which I switched to PC. As you might know I was needed to restore my iPod in order to transfer from the windows... well I clicked on restore, my iPod started the process but suddenly *crashed during the restore*.
    From now on, my iPod crashes even when I launch games (like Vortex, Music Quiz...) and when I try to restore it.
    BTW, there is a delay when I connect the iPod till iTunes recognizes it.
    Please help me,
    Thanks,
    Maor

    Apps crashing
    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Apple tv crashed during update

    My apple tv has crashed during an update. I has got stuck on step 1 of 2 preparing to update.
    I may have caused this by trying to use during update.
    Should i unplug and start over
    Thanks

    You are not supposed to use while it is downloading and applying the update. It's very likely to have caused the issue. I don't think you can just unplug and start over, though you may try.
    I would suggest grabbing a micro USB cable and restoring in iTunes, which will also download the latest update
    http://support.apple.com/kb/HT4367

  • IPod Touch 1st generation won't start up after hard reset

    My iPod Touch 1st generation stopped working after I clicked "Erase all contents & settings". It won't start unless I hold the Sleep/Wake button & the Home button together. Then I get the Apple Logo but after a short time a wheel appears just below the logo which never disappears. I have pressed those 2 buttons while the iPod is plugged in to a power source & left it overnight but the wheel still doesn't disappear & nothing further happens. Any suggestions?

    Try here:
    iOS: Not responding or does not turn on

  • HDD crash Photoshop CS6 won't start - scratch disk error

    The disk I used for the Photoshop scratch files crashed.  Now Photoshop CS6 won't start.

    Press and hold Ctrl+Alt or Cmd+Opt, start Photoshop and select a different disk.
    Benjamin

  • IPod crashes since update

    Since update my iPod crashes and when I open a app it take be back to main screen so I now can't go on any apps and sometimes it dosn't want to unlock has any one else had this problem since update as it was working fine since update 

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Iphone crashed during update...

    HELP!!! my iphone 3gs crashed during the software update. I finally managed to restore the iphone (a complete pain in the ***) and now it looks like all my old text messages were erased during the restore!
    Is there any was of restoring the messages that were on the phone before the update/crash
    Thanks a million.
    Message was edited by: mdpalmer

    Restore from Backup in iTunes would recover them.

  • Bios recovery for HP dv5-1235dx/Vista (64-bit) crashed during update

    My HP Pavillion dv5-1235dx which ran windows vista (64-bit) crashed while updating bios (after my old bios was deleted).  I have tried the start+b+power trick to recover but that option did not work.  HP Support suggests to create a usb key to install bios, however I have repeatedly failed in recovering/installing bios because the instructions are very limited. They mention a "create a usb key" option that I have yet to find that would make the key.  After using the HP UEFI BIOS Update SoftPAQ and extracting files from the bios .exe file, I found the following:
    1 folder (sp45138) with contents below
    3602F21.fd
    3603F21.fd
    ding (wave sound)
    InsydeFlash (application)
    InsydeFlash (text document)
    iscflash.dll
    iscflash.sys
    iscflashx64.sys
    platform (configuration settings)
    So, my questions are as follows:
    Where is the mystery "create a usb key" button?
    What files should I have installed on my usb drive?
    Does anything have to be renamed or formatted?
    Thanks for any help given!

    Hello Ceelion21.  I understand you're trying to recover your computer from a failed BIOS flash.
    I see this question get asked a lot so I have made sure to bookmark the instructions which I found on another website.  Here is a link.
    You should be able to download the BIOS file from HP Support.  I believe you'll need to use an application such as 7-Zip to extract the BIOS file and locate the *.FD file.
    If this doesn't work you'll likely need to have the notebook repaired.  If you'd like to inquire about a repair through HP Support and are in the US/Canada you can give them a call at 1-800-474-6836.  If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.
    Let me know the result of the BIOS recovery.  I hope you have an excellent night!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • I accidently unplugged my iPod touch during update I tried to restore but the 'iPod update server could not be contacted' PLEASE HELP!

    Hi, please help me
    When my iPod was 'preparing for update' my iPod USB accidently fell out. I turned it on and a usb sign and an arrow to iTunes came up, so I plugged it in. It comes up with a message saying iTunes has detected an iPod in recovery mode, You must restore this iPod before it can be used with iTunes. After that, I clicked restore and it said 'The iPod software server update could not be contacted' and that's it!
    I've tired,
    Resetting my iPod (the usb to iTunes sign still comes up)
    Holding down the Home and Power button at the same time for many seconds
    Restting my computer
    Going into LAN settings and changing that
    Please, I really want it too work as I just got it today for my birthday
    Any help would be much appriciated, thank you

    Yu can try here. However, other users been having the same problem so it may be due to a problem with the Apple servers.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Maybe you are looking for

  • XSLT Mapping - Getting current date in XSLT version 1.0

    Hi, I want to fetch the system date and compare it with another date, say 06.04.2010. How can I do this in XSLT 1.0? Thanks & Regards, Aditi Naik

  • Disk Utility won't run with Snow Leopard

    I updated to Snow Leopard 10.6.2 and now when I run Disk Utility.app it says that it is version 11.1 and will not run. I'm not sure why this app didn't update at the same time. Where can I download 11.5 Disk Utility? Thanks!

  • Anyone else have a little white box, top left of browser window???

    After the new big update, (that still wont allow changing the color of the arrange window...)  I notice I have a little white box top left of my browser window, in logic of course, that actually only shows up while cursor is moving.  Not a big deal,

  • Maintaining session time

    hi, in my web application, i have used session to handle user activities such as login status, few other cons, ..now my problem is when user logged in and left 15 mins IDLE the web application... now if i click any link it gives me an error, how to h

  • Movement Type 201 and VA90

    Hello, as we all know VA90 is a program used create a billing request for Service/Job Orders. In our company we use movement type 201 to create a goods issue for materials that have a warranty. When we enter a service order or job order number in VA9