Ipod crashes after going through airport x ray security

Every time after my 3rd generation ipod classic goes through the airport security x ray unit, and then I subsequently connect it to my Mini, the ipod crashes and I have to reset my ipod. Does anyone know why?

You would have to turn the iPad On. Don't believe it would hurt the iPad. The only problem might be that you would be setting the exposure in the lighted area & the Xray machine is probably dark inside.
But I would ask one of the TSA persons first. They might not allow it. They might not like the blinking red light.
 Cheers, Tom

Similar Messages

  • My ipod flashes after going through the wash

    My 3rd gen nano  went through the wash last week and i let it sit in a bowl of rice for about 5 days till the water was gone in the screen. This morning i plugged it into my computer and it turned on and synced but the screen was white. About two mintues later it started to flash the screen would go from black to white and still does this when i turn it on. I tried factory resetting by holiding the menu and center button that did not fix it.
    Any ideas what to do?

    Hello hairywombat,
    I think you are on the right track with the rice absorbing the H2o. After you drain the battery try the steps here:
    Putting iPod into Disk Mode
    Then restore your ipod in itunes if possible. This is what I would do.
    Hope this helps.
    ~Julian

  • Can I take a video on my iPad 2 while the device is going through the X ray at the airport?

    I want to take a video with my ipad while it goes through the X ray at the airport. Is that going to damage my iPad? Do I have to turn it on? I'm working on a video and I though that it could be a nice idea for an scene to have that shot.

    You would have to turn the iPad On. Don't believe it would hurt the iPad. The only problem might be that you would be setting the exposure in the lighted area & the Xray machine is probably dark inside.
    But I would ask one of the TSA persons first. They might not allow it. They might not like the blinking red light.
     Cheers, Tom

  • Unable to Download Apps after going through all the troubleshooting. What do I do next?

    Unable to Download Apps after going through all the troubleshooting. What do I do next?

    Also, see here
    http://decipher-media.blogspot.co.uk/2011/05/itunes-sync-vs-backup-how-to-ensure -you.html
    http://support.apple.com/kb/HT4946

  • In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

    In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

    After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold!  I can change the media kind to Audiobook!  So, it looks like iTunes Match locked the files up somehow and for some reason.
    I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

  • So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

    So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
    Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
    Can anyone suggest a solution to this vexing problem?
    Thanks in advance.

    Jeremy.Laurin,
    have you tried agb76’s approach here?

  • Trying to update iphone to 5.0 and after going through the entire download, I get the message that "the Network Connection timed out".  Check my network settings.  Help!

    Trying to update iphone to 5.0 and after going through the entire download, I get the message that "the Network Connection timed out".  Check my network settings.  Help!

    I have been having this problem for many many months. I switched off my firewall and windows firewall and i am still having the same problems.
    Apple store were not helpful in anyway and im at my wits end :-(
    Any help welcome

  • HT1925 I am trying to update Itunes in Windows XP but after going through the installation process I am getting a message saying "The Older Version Update cannot be removed. Contact your technical support". What do I do???

    I am trying to update Itunes in Windows XP but after going through the the installation process I am getting a message saying "The Older Version Update cannot be removed. Contact your technical support". What do I do???

    "The Older Version Update cannot be removed. Contact your technical support".
    Doublechecking before proceeding. Is it saying the older version of Apple Software Update cannot be removed, or some other program? (Several different program names can be mentioned in this context.)

  • IPhone's iPod crashes after 1 song and goes back to start page

    After the 3.0 OS upgrade I have had several occurances of the iPhone's iPod crashes/stopping/resetting itself after playing 1 track. The first time I resolved it by re-syncing it with iTunes, however, it's not repairing the problem now.
    Anyone any suggestions?

    I am experiencing this same problem. I had trouble loading an audio book on last night, which i cancelled mid way through
    Today i get through one maybe two songs and the audio stops. I restart and the ipod bombs out part way through the first track
    Rebooting didn't fix

  • IPod crashes after attempting to play a video or song!

    Alright, I was watching a video on my iPod, when suddenly is freezes and starts making a screeching noise. I reset it, and tried to play it again. All I get is a black screen. I reset it again, and tried to play a different video. Same result. Then after resetting it again, I tried to play a song, and the same thing happens. I tried to play some games, and the default games work fine, but the games downloaded from iTunes don't work. So I restore the iPod in iTunes, and that worked out fine, but when I tried to sync my iPod, Windows says that it can't save it to E:iPod and try saving it somewhere else. I had never had this problem until the iPod stuffed up. Can someone please tell me what is going on, and how it can be fixed?!?

    therecordinggenius wrote:
    I am quite new at Logic and have two questions:
    1
    When I bounce a Logic project to iTunes, I have no problem listening to the song on my computer - in iTunes. But when i sync my iPod and then click on the song there, the iPod 'crashes' (needs rebooting) - and when it's ready again, nearly all the battery power has gone.
    I have tried most of the options when bouncing ... aiff, wave, mp3, m4p etc ... all of which give the same result.
    Sounds like a F^&*ed up iPod. IMO.
    2
    How come the 2,000 page Logic manuals - as far as I know - never touches upon the subject of mastering?
    Because Logic is mainly used to create music / post production. Not so much for mastering. The guys who created Logic are not mastering engineers..but musicians.
    If you want to master with Logic, you CAN. Go get a good book on mastering... there's a few out there.
    Cheers

  • Shocks when going through airport security

    I have noticed time after time that when I put my aluminum unibody McBP through the airport x-ray machine I get a whopping static shock when I touch the case on the other side. Is this damaging to the machine, and how can I prevent it? I have little enough hair as it is.

    Do you have the computer resting on a case or sleeve or something? I googled "what comes out of x-rays?" and this page came up: http://www.ehow.com/about4678475what-radiation-comes-out-xrays.html
    I looked at Wikipedia's page on electromagnetic radiation. Here is the link: http://en.wikipedia.org/wiki/Electromagnetic_radiation
    Could this possibly be the reason for the shocks? It sounds justifiable to me. I dunno though. I hope this helps.

  • Ipod bricked after playing through speaker dock

    Hello,
    Both mine and a friend's ipod nanos (latest model) have stopped working completely after being put into a little speaker dock. Its strange because we have used those speakers succesfully loads before.
    Both are just black screens, don't respond to the menu and centre reset or being plugged into a mac.
    Any suggestions?
    Thanks,
    Leo

    There is something wrong with the new ipods. They don't charge in certain docking stations like the Bose System. Mine wouldn't at least, and I have read other threads here regarding the same thing. I also had used a friends wall charger, it wasn't an apple product, but it had worked on his 80gig ipod classic and still does. It charged my ipod 4th gen, but very weakly, and it wouldn't hold a charge for very long. By the time I got home it was dead, completely. Hooked it up to the macbook and it was still dead. It wouldn't even show up on the mac.
    After reading about the apparent problems with this product, and going through apple's phone menu bullsh*t, I said f*ck it. I took it back to Costco. They have a 90 day return policy, no problem. Got a full refund.

  • Battery flattens when going through Airport Securi...

    On a recent trip abroad whilst taking my Nokia 5230 for the first time I noticed once it passed through the security scanner, with the phone switched on, when I went to use it the battery was completely flat.  I had only charged it the night before.  Exactly the same happened on my return journey.   Obviously the phone was not on my person but in my hand luggage in the tray provided.
    Fortunately I had my N78 with me and this was unaffected.  Next time I go abroad I'll switch on my 5230 before it goes through the security scanner.  Just wonder if that will make any difference.  Has this happened to anyone else?

    You would perhaps expect an increase in power consumption of device trying to maintain signal within airport confines but not to this degree.
    Happy to have helped forum with a Support Ratio = 42.5

  • Email becomes unreadible after going through Cisco email gateway

    Hi all,
    I have an issue with one sender who is trying to email password protected attachments to other staff in our organization.
    The issue seems to only occur when the email goes through our C370, if he sends to an externally hosted email account the email and attachment can be opened, and when that email is then sent as an attachment back into our organization it is also openable, which seems to rule out our clients.
    Sanitized header from the C370 below is part of the message header which I think might contain the problem, I have removed the first part with to & from as I didn't know if it was relevant..
    Subject: Daily Subject
    Thread-Topic: Subject
    thread-index: Ac+JToaXaax6VYP2Qlaj21mbCsrr5w==
    Date: Mon, 16 Jun 2014 10:36:28 +0000
    Message-ID: <Message ID>
    Accept-Language: en-GB, en-US
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator:
    X-Originating-IP: [192.168.30.71]
    Content-Type: multipart/mixed;
            boundary="_005_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_"
    MIME-Version: 1.0
    Return-Path: <[email protected]>
    X-OriginalArrivalTime: 16 Jun 2014 10:36:31.0542 (UTC) FILETIME=[D6741560:01CF894E]
    This is a multi-part message in MIME format.
    --_005_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_
    Content-Type: multipart/alternative;
            boundary="_000_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_"
    --_000_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_
    Content-Type: text/plain;
            charset="utf-8"
    Content-Transfer-Encoding: base64
    UGxlYXNlIHNlZSBhdGFjaGVkDQoNClJlZ2FyZHMNCg0KQWtlZW0gTGluc2V5DQoNCkFrZWVtIExp
    bnNleQ0KV0hBQ1QgQ2FwYWNpdHkgVGVhbSBBZG1pbmlzdHJhdG9yDQpBY29uYnVyeSBFYXN0DQpX
    b3JjZXN0ZXIgUm95YWwgSG9zcGl0YWwNClRlbDogMDE5MDUgNzYwMDY3DQpFbWFpbDogYWtlZW0u
    bGluc2V5QGhhY3cubmhzLnVrPG1haWx0bzpha2VlbS5saW5zZXlAaGFjdy5uaHMudWs+DQoNClRo
    ZSBpbmZvcm1hdGlvbiBjb250YWluZWQgaW4gdGhpcyBlbWFpbCBtYXkgYmUgc3ViamVjdCB0byBw
    This string continues for 10's of lines
    --_000_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_
    Content-Type: text/html;
            charset="utf-8"
    Content-Transfer-Encoding: base64
    PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i
    dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjxzdHlsZT4NCjwhLS0NCkBmb250LWZhY2UNCgl7
    Zm9udC1mYW1pbHk6Q2FsaWJyaX0NCnAuTXNvTm9ybWFsLCBsaS5Nc29Ob3JtYWwsIGRpdi5Nc29O
    b3JtYWwNCgl7bWFyZ2luOjBjbTsNCgltYXJnaW4tYm90dG9tOi4wMDAxcHQ7DQoJZm9udC1zaXpl
    OjExLjBwdDsNCglmb250LWZhbWlseToiQ2FsaWJyaSIsInNhbnMtc2VyaWYifQ0KYTpsaW5rLCBz
    cGFuLk1zb0h5cGVybGluaw0KCXtjb2xvcjpibHVlOw0KCXRleHQtZGVjb3JhdGlvbjp1bmRlcmxp
    bmV9DQphOnZpc2l0ZWQsIHNwYW4uTXNvSHlwZXJsaW5rRm9sbG93ZWQNCgl7Y29sb3I6cHVycGxl
    This string continues for 10's of lines
    --_000_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_--
    --_005_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_
    Content-Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet;
            name="16.06.14 test data.xlsx"
    Content-Description: 16.06.14 test data.xlsx
    Content-Disposition: attachment;
            size=21504;
            creation-date=Mon, 16 Jun 2014 10:35:56 GMT;
            modification-date=Mon, 16 Jun 2014 10:34:01 GMT;
            filename="16.06.14 test data.xlsx"
    Content-Transfer-Encoding: base64
    0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAADAAAAAQAAAAAAAAAA
    EAAAAgAAAAEAAAD+////AAAAAAAAAAAHAAAACAAAAP//////////////////////////////////
    YhaetsvzHMi3ipkrNJSzrFVRN7+bX4l0BumhMZTII2xrE6oeB8hEqY8k2VbXv8U3HBd8J9RGVWDJ
    SqZakOR/sQpgHLGkP6PAdRCn1DnGilooj9RrP4T0NjAipUVFMh82LbWeSHkYeF2odZvS9FDy4hCP
    jz0oU3IWExxK67VOvELynIIGDs4OywbgzO1/umDQ5rzKg134XJcOCjZogzLN0aRirTBioH9/1JCq
    CDi7xvoEUpPFjuNQt0xfVUV8fqr3fCzrKhhIAh7fo4FYVKHzS2lZkCXP+qLINNsBWDkb2WexmN6U
    UrwbjQBNCKLKf2n46v1C
    This string continues for 100's of lines
    --_005_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_
    Content-Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document;
            name="16.06.14 test document.docx"
    Content-Description: 16.06.14 test document.docx
    Content-Disposition: attachment;
            size=32566;
            creation-date=Mon, 16 Jun 2014 10:36:01 GMT;
            modification-date=Mon, 16 Jun 2014 10:33:24 GMT;
            filename="16.06.14 test document.docx"
    Content-Transfer-Encoding: base64
    UEsDBBQABgAIAAAAIQDwIex9jgEAABMGAAATAAgCW0NvbnRlbnRfVHlwZXNdLnhtbCCiBAIooAAC
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAC0
    lE1PwkAQhu8m/odmr6Zd8GCMoXBQPCqJGM/Ldgobux/ZWb7+vdMWGjRAUfDSpN193/fZ2c70Bitd
    RAvwqKxJWTfpsAiMtJky05S9j5/jexZhECYThTWQsjUgG/Svr3rjtQOMSG0wZbMQ3APnKGegBSbW
    gaGV3HotAr36KXdCfoop8NtO545LawKYEIfSg/V7T5CLeRGi4Yo+1yQeCmTRY72xzEqZcK5QUgQi
    5QuT/UiJNwkJKas9OFMObwiD8b0J5crhgI3ulUrjVQbRSPjwIjRh8KX1Gc+snGs6Q3LcZg+nzXMl
    This string continues for 100's of lines
    --_005_B078E7CA8779484CB2961CF42F9F12481EE3C285RALXMBX01WHITSL_--
    Below is the header when a copy is sent to Hotmail:
    x-store-info: J++/JTCzmObr++wNraA4Pa4f5Xd6uensydyekesGC2M=
    Authentication-Results: domain.com; spf=none (sender IP is IP Address) [email protected]; dkim=none header.d=domain.uk; x-hmca=none [email protected]
    X-SID-PRA: [email protected]
    X-AUTH-Result: NONE
    X-SID-Result: NONE
    X-Message-Status: n:n
    X-Message-Delivery: Vj0xLjE7dXM9MDtsPTE7YT0xO0Q9MTtHRD0xO1NDTD0w
    X-Message-Info: NhFq/7gR1vQRHV6jbdvQfj78RRbHIsgK1hLH/9kB6NkUdTKzM/S60sw6uhmZk31ye2Ut7SsNRG194mNbBlVxpVFTOFvWOorYIP5ew8iIWHabwOUS2au4siXFpV/hL6TnYc2aLcBqOdiwZaz+fO5BeYoeCs9RYcubk1Jzn4Ff1TWTeX5PBOwirh+7vaICe5u9/LltrbQ5ODA+UL1EVPECVAszVGdCkiJ5
    Received: from relayserver.uk ([62.208.144.128]) by SNT004-MC3F25.hotmail.com
     over TLS secured channel with Microsoft SMTPSVC(7.5.7601.22678); Tue, 17 Jun
     2014 02:22:01 -0700
    Received: from blah.net (blah.net
     [IP Address]) by IMSVA80 (Postfix) with ESMTP id D712D448A3A for
     <[email protected]>; Tue, 17 Jun 2014 10:21:59 +0100 (BST)
    Received: from Blah.local (smtp.server [IP Address]) by
     blah.net (Postfix) with ESMTP id 5F6B6448F33 for
     <[email protected]>; Tue, 17 Jun 2014 10:21:57 +0100 (BST)
    X-PMWin-Version: 3.0.2.0
    X-MimeOLE: Produced By Microsoft MimeOLE V16.4.3528.331
    Received: from blah.local ([192.168.46.221]) by
     Blah.blah.local with Microsoft SMTPSVC(IP address); Tue, 17 Jun 2014
     10:21:36 +0100
    Received: from Server name ([fe80:::::822d]) by
     Exchange server name ([192.168.46.221]) with mapi id 14.02.0342.003;
     Tue, 17 Jun 2014 10:21:36 +0100
    From: "Surname, Firstname" <[email protected]>
    To: <[email protected]>
    Subject: Subject
    Thread-Topic: Subject
    thread-index: Ac+JToaXaax6VYP2Qlaj21mbCsrr5wAvrAhgAAASClA=
    Date: Tue, 17 Jun 2014 09:21:35 +0000
    OLD-MSG-ID: <Old Message ID>
    Accept-Language: en-GB, en-US
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator:
    X-Originating-IP: [192.168.30.85]
    Content-Type: multipart/mixed;
     boundary="----=_NextPart_000_0002_01CF8FA3.87849CD0"
    MIME-Version: 1.0
    X-OriginalArrivalTime: 17 Jun 2014 09:21:36.0838 (UTC) FILETIME=[89D06E60:01CF8A0D]
    Message-ID: <Message ID>
    X-TM-AS-Product-Ver: IMSVA-8.0.0.1495-7.5.0.1017-20762.006
    X-TM-AS-Result: No--42.282-60-31-10
    X-imss-scan-details: No--42.282-60-31-10;No--42.282-3-31-10;No--42.282-4-31-10
    X-TMASE-MatchedRID: JcGkxUY+Fi9XTuUjTP3HupObxJgN/hOxOhJ9m53n4aDIGC/aFIx4/sEhNzkwL19YZrHSGmcb0tPNR6N8PNUm3hQ3/xoDO/IlaK+MsTwM+1nP60q/FX5hsL40mI6UpXzvoYk2ByBT6IRl+EcAbF0M2///m9pcIDdz1kpuPUtox1KS2fL5IypDsYEcpMn6x9cZ67hywNgiYt0GLHHeUCuj17PllCNDDbY+2BJ2fZa5f2xqeX9tIrexd/jQkA7rdCuFfMhjt3b5PP1K0WT/zXAgkpjaylIY/e3Y9hU4NdzeECk8LuP+bOkMWt3jF2fVcPdzDB+ErBr0bANar2Wff4KSIaUXswX/xrISOe5BYzkyOSWATHNX4n1dGGZBslDPcF5vyAzYZQWW+9rbH8WaUL9qjLTxnpbCjruIowtRP8whCK8PmNN74zkTtDMO4HIvV/eCHcN4x+ltYL371rCnW2Nmh+V1K1TQIEH5D+WFNKXSJkRkYpwdTJ43fZUdXE/WGn0FVmA9rBozNAcLEpo317bQY8H9mYPMZJ+SW8KeTXPQ6zqOhzOa6g8KrXacDQD1LjGG8gyxx3MD7IZOuMJDRGZYWM2dM+bCCs0tT+iWcZL4Ksw=
    X-Hotmail-VirusCheck: Clean
    Return-Path: <[email protected]>
    The sender has advised they are using Outlook 2010.
    Thanks in advance for any help working out why the email cant be read when coming in through our C370 gateway & sorry if posted in wrong community
    Katie

    Hi,
    Could you please try to put another DNS server on the ESA? Like ISP's DNS or a public one.
    Luis Silva

  • Crash after going idle - MSI Afterburner / GTX 970 SLI

    Greetings,
    I love my new MSI GTX 970 Gaming Cards -- they work awesomely
    However, I have a problem where if I'm running MSI Afterburner at all (i.e. load it, but don't do any overclocking), I receive a black screen and reboot 5-45 seconds after exiting any 3D application.  The applications all run fine, the crash does not occur if Afterburner is not open.  I've received the crash after Furmark, Elite Dangerous, Heaven Benchmark, Star Citizen, etc..   The idle crash NEVER happens so long as Afterburner isn't running..
    I've used drivercleaner to clean out all old drivers,  I've uninstalled MSI afterburner and reinstalled (and cleaned directories/registry inbetween).
    Any suggestions/ideas? 
    Update - the crash does NOT occur if i'm running with SLI disabled. 
    John

    Sorry and thanks for the guide - I wont' be lazy next time
    Geforce 344.16 driver
    Afterburner 4.0.0 (is there a beta that 'officially' supports GTX 970? - I didn't see it in the changelog)
    MSI Gaming app installed or uninstalled (tried both) - latest version from MSI website
    Rest of stats -
    ASUS P8P67 Pro - 3602 (latest BIOS I could find)
    VGA: MSI Gaming GTX 970 in SLI
    PSU:  Corsair HX 950
    Intel Core i7-2600k S/B oc'd to 4.6 Ghz
    Mem:  2x8GB DDR3-1600 (stock speed/settings/voltage)
    Crucial MX100 512GB
    Cooler:  Original Koolance EXOS for the CPU
    Windows 7 64-bit
    Quote from: Nichrome on 04-October-14, 23:10:14
    Hello,
    We need a bit more info >>Posting Guide<<
    Also if you could state versions of Afterburner, MSI Gaming App (if you use it) and of Nvidia driver.

Maybe you are looking for