Ipod Crashes in Vista but Fine on XP??

I have upgraded to a 5th gen ipod. I connected it to my Vista pc, installed latest itunes(7)and all seemed well, until I recieved the ipod cannot be synced error.
I then couldn't disconnect the ipod properly and after having loaded about 1gb of music gave up! I reconnected ipod and box came up telling me that the ipod drive may be corrupt click to repair etc.
I decided then to try ipod on an xp based system and the ipod connected fine, disconnected no problem and I was able to load plenty of songs. Confused, I decided to try Vista system again and alas, same errors etc.
I desperate to know wether the disk corrupt error is just a vista problem or if the disk could be corrupted and need a restore?

It could be a drive collision problem: http://docs.info.apple.com/article.html?artnum=93499

Similar Messages

IPod recognized by Vista but not iTunes

Hi, I have a perplexing problem. iTunes is suddenly not recognizing my
iPod. Vista does (though has renamed it Apple iPod), but it does not
open (when I try, Explorer hangs)
Nothing happened b4 to provoke this behavior. I uploaded some podcasts
on Friday, went out of town (w/out the iPod), and came back Monday
night. Tuesday, I try to update the iPod and it doesn't show up in
iTunes, but Vista wants to reformat it!
I try the following (suggested in the Apple support pages):
* I restart the iPod service
* I completely uninstall iTunes
* I reset the iPod
Each time I connect the iPod to Vista, it asks if I want to reformat it. I grudgingly restored to see if that would help. I even reformatted it (Quick Format) even though I had heard that was bad. Still doesn't show up in iTunes, but the iPod is happy as a clam, albeit empty of any songs/podcasts.
Any ideas? Oh, and I have an ancient 3G iPod w/ doc connector. After 5
years, (and 3 batteries) it still works like a champ.

You need to install iTunes in order to install the necessary drivers.

Samsung LCD not working in Vista, but fine with OSX. Help!

Ok guys. I have read some of the posts on this topic, but they really haven't been helpful, so I am hoping someone can point me in the right direction. I have a Samsung 4671 TV, that when connected through DVI to HDMI on my MBP on OSX it works fine, on Vista my TV says mode not supported. Since, it works fine with OSX, I kind of doubt it is the TV. Has anyone had this problem with a similar setup and gotten it to work? Thanks.

I suspect it's the Vista DVI driver that is at fault. A Google search with 'Vista DVI driver apple' shows that others are having your same problem.

Ipod recognised on vista but wants to format it...

Basically i've recently re-installed vista64 after it went faulty, went to setup itunes/ipod on this install and it's not being picke dup properly.
If i plug in the ipod, itunes says its corrupted and wants to run a restore, vista wants to format it.. can't explore the drive in my computer etc
if i plug the ipod into my other pcs or one in work it works fine, can explore the drive etcetc.
anyone any ideas what the problem is, tried 3 different versions of itunes, different usb ports etc

oh aye and it's a 5th gen 80gb ipod

Macbook crashes after login, but fine in safe mode... please help!!

So, out of nowhere my trusty macbook a few seconds after my desktop appears the computer needs to restart screen scrolls down, and that's pretty much it, as far as i'm aware I haven't changed any permissions and as far as i can see there isn't a programme to blame, as mentioned safe mode is fine, this is how i'm able to write this, is there anything I can do from here to try and fix the problem with the regular login?
Thanks.
Will.

If it works in safe mode then that usually means there is something related to system files causing the problem or the installation of incompatible software or malfunctioning software. The simplest solution is to reinstall OS X as follows:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

I still have my iPod Nano 3rd generation, but my old computer crashed and I did not have itunes backed up, so I lost my library. Is there a way to get the songs from my old ipod to new computer library and then on to the new ipod?

I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?

Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window.

My computer crashed so i had to reformat, but the only problem is i lost my old itunes account, had to download new version. Now i have an ipod full of music but how can i place all my music I have on the ipod into my new itunes account??

my computer crashed so i had to reformat, but the only problem is i lost my old itunes account, had to download new version. Now i have an ipod full of music but how can i place all my music I have on the ipod into my new itunes account??

Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.

My iPod 4th-gen charges just fine in any wall outlet, but when connected to my brand new ASUS Windows-8 laptop's USB 3.0 port the charging process just keeps "blinking" on both the iPod and the laptop and will not connect to Itunes...

Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem! My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar. When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over! I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good. I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work! The iPod, the laptop and iTunes ARE all fully updated! I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing! I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol. I hope somebody knows a fix or solution! Thank You!

Try on another computer to help determine if iPod or computer problem.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Ipod will sync on windows vista but not xp

Hi, my ipod classic will sync to a pc running windows vista but wont sync to a pc running windows xp, has anyone got any ideas as to why this would be or how it can be overcome please.

Yes its all up to date, it used to connect to my laptop running vista but my laptop died so i moved my libary across to an old pc bunning xp but it just wont sync and doesnt show up when i run the diagnostics, but when i tried it on a friends laptop running vista it synced her entire libary (over 2500 songs) straight away.

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock

TS1398 my ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wif

My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.

- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto the shuffle. My laptop crashed whish had all my new music

Alright, so my ipod touch stopped working, but I can still connect it to itunes, but my friend gave me his old nano. I was wondering how I could get my more updated songs from my ipod touch onto th nano. My laptop crashed whitch had all my new music, and im afraid if I sync my Ipod touch to the desktop with all my old songs, ill lose all my newer ones which I dont want to happen because I want them on my nano. Im sorry for the confusing topic im just so lost.

All you have to do is connect your new iPod to the computer that has the library for your old iPod.
When iTunes comes up, click on your new iPod under Devices.
At the top of the Summary Page click Music.
Click Synch Music.
Do the same thing for Photos, Apps, Movies and so on...
Now just synch the iPod.

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated i think it has somthing to do with the battery but im not sure because it still turns on. Im for sure that its the ipod and not the cord or outlet and charger. somone please help!!!!!! I tried everything besides opening it up.
I dont know what to do???????

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Ipod touch 2nd generation (works fine), but will not shut off

my ipod touch 2nd gneration works fine, but it will not shut off. This use to work: I would hold down both top and face button for about 10 seconds and it would shut down. Now nothing happens no matter how long I hold those 2 buttons down. Any suggestions?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Ipod Crashes in Vista but Fine on XP??

Similar Messages

Maybe you are looking for