IPod cyclical redundancy check/Parameter Incorrect error on large files
I’ve started getting errors on some large files (seemingly random) that I copy to my 5.5G 40GB iPod. (They’re .tivo files from my Tivo so I can watch shows on another computer, and my iPod is FAT32 used only with Windows.)
The files will copy without error, but then when I try to copy them off the iPod, on one system I’ll get a “cyclical redundancy check” error, and on another in the same spot with the same file I’ll get “Cannot copy <name of file>: The parameter is incorrect.
It seems to be happening just recently, and randomly. Maybe I’ll copy 8 shows over, and only one will give me that error.
When I get the error, the iPod’s disk activity indicator will have stopped spinning. It’s like it’s quit trying to transfer anything. I’ll get errors for a short while after that if I try to access anything on disc, but then it’s like the iPod wakes up again, the disc spins back up, and my computer can access files again.
I’ve restored my iPod recently, and run a basic check on the disk using Windows’ built-in disk utility.
Any other ideas what’s going wrong? Nothing’s changed about my systems since this started yesterday.
I’ve started getting errors on some large files (seemingly random) that I copy to my 5.5G 40GB iPod. (They’re .tivo files from my Tivo so I can watch shows on another computer, and my iPod is FAT32 used only with Windows.)
The files will copy without error, but then when I try to copy them off the iPod, on one system I’ll get a “cyclical redundancy check” error, and on another in the same spot with the same file I’ll get “Cannot copy <name of file>: The parameter is incorrect.
It seems to be happening just recently, and randomly. Maybe I’ll copy 8 shows over, and only one will give me that error.
When I get the error, the iPod’s disk activity indicator will have stopped spinning. It’s like it’s quit trying to transfer anything. I’ll get errors for a short while after that if I try to access anything on disc, but then it’s like the iPod wakes up again, the disc spins back up, and my computer can access files again.
I’ve restored my iPod recently, and run a basic check on the disk using Windows’ built-in disk utility.
Any other ideas what’s going wrong? Nothing’s changed about my systems since this started yesterday.
Similar Messages
-
Help - "Cannot copy file: Data error (Cyclic Redundancy Check)"
Hey there,
I'm having problems with my Zen Mosaic EZ00. Up until a few weeks ago it has been working fine however, since then, has begun to show the error message? "Cannot copy file: Data error (Cyclic Redundancy Check)" whenever I try to copy files on to it. I have tried the recovery software available and it only updated the firmware. Some files do occasionally (and very occasionally) copy but usually it shows the error message and cancels the copy.
I would really appreciate if anyone could help me with this?
Many thanks :smileytongue:sorry for the double post!
ive just realised that my ipod isnt actually charging, its just got the orange light blinking!
not too sure what is going on now!
lol -
HT203175 error message "cyclic redundancy check"
Hello I'm experiencing an issue with my old computer. I'm trying to copy and paste my songs into a flash drive, so I can place it on my new Mac and an error pops up on certain songs "cyclic redundancy check." This only started happening when I updated my Itunes. Please help!!!
"cyclic redundancy check."
That one suggests disk/file damage.
Are those songs currently playing normally in your iTunes player? -
Ipod nano giving "cyclic redundancy check error"
Hi
I have an ipod nano 4gb. recently when i connect it to my windows laptop it is not showing up in iTunes. I have gone thru the support site and tried all the options, none of them worked though. It is getting recognized by windows os and when i try to copy something to the removable disk(ipod) it pops up a message saying "cyclic redundancy check error".
can someone help me in this.
Thanks
Kousik
nano 4gb Windows XP
Windows XP
ipod nano 4gb Windows XPThe cyclic redundancy check error (CRC) means that there is either a problem with the file you are trying to transfer to your iPod, or with the files already on the iPod. The fact that it happens when you try to copy something to the nano would indicate a problem with the nano itslef. If you have any data already on the nano, see if you can open it without getting that error, or successfully copy other data to it.
You've probably been through this, but read this article: iPod shows up in Windows but not in iTunes.
If you keep getting the CRC error, and the iPod isn't recognized in iTunes or the iPod updater, you probably need to format the drive. Back up the data on your iPod if you can, and right click on the disk in My Computer and select format. Format it in FAT32, and don't do a quick format. Then, restore the iPod with the iPod updater.
Tom -
Windows Data Error (cyclic redundancy check) on USBSTOR - Exclamation Point
Hi, folks, hooking my friends' video iPod to a Windows XP PC that has all of the latest patches, and when I go into the Device Manager, the iPod is listed with an exclamation point...says there is an error with the device driver (USBSTOR)...and when I try to update, it gives me a Data Error (cyclic redundancy check). Any ideas?
dell Windows XP ProI guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?
-
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Data error (cyclic redundancy check) when installing windows xp..
hi guys.. i'm new here.. just switched to macdom a few days ago but unfortunately, i have been having problems trying to install windows xp with sp 2 on my system using boot camp. everytime i install it, i get to the setup screen ("39 minutes till setup rah rah rah", "windows xp is awesome because it has this cool interface etc... rah rah rah") and then the error of doom comes out -_-
the error given is;
an eror has been encountered that prevents setup from continuing
one of the components that windows needs to continue setup could not be installed
data error (cyclic redundancy check)
if you are installing from a cd, there might be a problem with the disc; try cleaning the disc or using another disc
if you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. run the disk checking utility on your installation drive from the recovery console and start setup again
press ok to view the setup log file
i have tried numerous times without fail and it is getting to my head.. gah.. if someone could help me out, it would be massive and i would sell my soul to you! (kidding).. thanks for reading!
p/s: my setup is;
Macbook
2.1ghz
1gb ram
120gb hard disk
dvd/cd-rw combo drive
the basic setup pretty much.. again.. any help would be greatly appreciated. thank you so much guys!I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?
-
Error message: Cyclic Redundancy Check
I am trying to download Elements 11 to my Windows 8 computer. I keep getting the message "Data error (cyclic redundancy check)." What could be causing this?
See if the following posting helps:
Re: I'm trying to install Acrobat XI Standard and keep getting "data error: cyclic redundancy check". -
Boot Camp error when installing XP - cyclic redundancy check
I am trying to install Windows XP through boot camp and I have tried settting up using NTFS or FAT and when it go to the XP installation screen I kept getting an error: Data Error (cyclic redundancy check).
Does anyone know if there is anyway to solve this issue?Yeah, cray-z is right. Check that boot sector anti virus is turned off. If that is not the problem check your h/d jumper settings or try loading the default bios settings, and if still no luck write zeros to the first 50 (I think and I will probably be corrected) sectors in your hard drive. I had the same problem and when I called western digital these where the steps the customer service guy told me to follow.
-
Archiving Error - Cyclic Redundancy Check
Hey there,
My inbox is full again. I went to archive and I get the below message after the archive is finished:
Error while archiving folder "Inbox" in store "[email protected]". The file C:\Users\XXX\AppData\Local\Microsoft\Outlook\[email protected] cannot be accessed. Data error (cyclic redundancy check).
That file is in it's proper location, it's currently 6.5 gigabytes.Hi,
It might be that your data file (.ost) got corrupted while archiving. Please first check your hard disk for errors, then try to repair your data file by using Inbox Repair tool (scanpst.exe):
http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA010354964.aspx
For detailed steps, please refer to this KB article:
http://support.microsoft.com/kb/319128 (It refers to .pst in the article, should also apply to .ost file).
Hope this helps and feel free to post back.
Thanks,
Ethan Hua CHN
TechNet Community Support -
My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. MDBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M -
DPM (ID 30101 Détails : data error ( cyclic redundancy check) 0x80070017)
Dear all,
We are running DPM 2010 with a virtual tape library "firestreamer"
Sometime for no reason we get this error on DPM ( none on firestreamer ):
DPM a rencontré une erreur critique lors d'une opération d'E/S sur la bande Travail-LT-1Jours-Copier0-00000060 (J1K38E14N1H_TR3000000023W) (code-barres - J1K38E14N1H_TR3000000023W) dans Drive Firestreamer Tape Drive (L2TD0386E7E0C13805E1118F3E806E6).
(ID 30101 Détails : data error ( cyclic redundancy check) 0x80070017).
Sorry for the frenchy touch, I have just translated the famous cyclic redundancy check.
It is very anoying, We reload a new library and it works vell for a few day and suddenly ....
Cristalink says that Microsoft knows the bug and are not responsible for this matter as firestreamer have no error in log.Hi Wilson
I am having this issue on my DPM 2010 server. I use HP Ultrium LTO 5 tape library. I get this error
DPM encountered a critical error while performing an I/O operation on the tape AB1234L5 (ID 30101 Details: Data error (cyclic redundancy check) (0x80070017). The error remains the same for this one particular tape. Should I remove thattape? I logged in to
the library UI which does not report any error.
Please help.
Regards
Pavit -
Java.io.IOException: Data error (cyclic redundancy check)
Dear everyone,
I have a utility that copys a file, using streams.
It has always worked fine, but I ran into an
exception this morning:
java.io.IOException: Data error (cyclic redundancy check)
from the call:
int bytes = fileInputStream.read(byteBuffer);
Would you know what this exception is about? I
haven't seen that exception after that, though.
So it's a bit puzzling. Any help, or clue towards
solving this problem is appreciated.
Thanks a lot!
GeorgeIt's like the data stream is getting messed up...so I would think of a few things:
1) Bad memory?
2) Bad connections?
3) Bad disk?
4) Viruses
Anything that can screw up the data steam.
Other than that....maybe as simple as reinstall the JVM and put new compiled code out there and see if it behaves. -
Hi,
Can anyone please help with this? Our Tape Drive died and we got a new one from our Maintenance Company. Since then large backups to tape are failing. When the jobs are small they seem to go through OK but when the job is greater than around
200GB then it fails with the error below.
I tried updating the tape drive driver but Windows said that the drive wasn't functioning properly any more.
The only difference between the old faulty drive and the new drive is the firmware. We used to have A422 in the old drive. The new drive has D8D5. Can someone please help as it's driving me crazy.
"Affected area:
IBM TotalStorage 3573 Tape Library
Occurred since: 03/03/2015 10:19:37
Description: Library drive IBM ULTRIUM 5 HH 3580 TAPE DRIVE (1068006186) in IBM TotalStorage 3573 Tape Library is not functioning and library jobs may fail until the drive is repaired.
The drive is not functioning for the following reason:
(ID 3303)
DPM encountered a critical error while performing an I/O operation on the tape Physical Servers-LT-MonthlyBackup-00000235 (000086L4) (Barcode - 000086L4) in Drive IBM ULTRIUM 5 HH 3580 TAPE DRIVE (1068006186).
(ID 30101 Details: Data error (cyclic redundancy check) (0x80070017))
More information
Recommended action:
Retry the operation. If the problem persists, contact your hardware vendor.
No action required
Resolution: To dismiss the alert, click below
Inactivate"
Regards
WillieHi,
It sounds like another faulty drive - You can try to reproduce the problem outside of DPM using some external utilities. If you get an error before the tape fills you can use net helpmsg errorcode to see what the error was.
Download the DPMerasetape.zip file from the following link and extract to c:\temp folder.
https://onedrive.live.com/?cid=b03306b628ab886f&id=B03306B628AB886F%21524&sc=documents
The utilities are not that user friendly, but here are the basics.
Always Stop DPMLA Service prior to running MCT.EXE Commands.
NET STOP DPMLA
C:\> mct-x64.exe -p
Opening changer \\.\Changer0
********** Changer Parameters **********
Number of Transport Elements : 1
Number of Storage Elements : 50
Number of Cleaner Slots : 0
Number of of IE Elements : 0
Number of NumberDataTransferElements : 6
Number of Doors : 0
First Slot Number : 0
First Drive Number : 0
First Transport Number : 0
First IEPort number : 0
First Cleaner Slot Address : 0
Magazine Size : 0
Drive Clean Timeout : 600
Flags set for the changer :
CHANGER_BAR_CODE_SCANNER_INSTALLED
CHANGER_POSITION_TO_ELEMENT
CHANGER_STORAGE_DRIVE
CHANGER_STORAGE_SLOT
CHANGER_DRIVE_CLEANING_REQUIRED
CHANGER_VOLUME_IDENTIFICATION
CHANGER_VOLUME_SEARCH
CHANGER_SERIAL_NUMBER_VALID
Changer can move from Slot to :
Slot
Drive
Changer can move from Drive to :
Slot
Drive
Changer is Capable of positioning transport to Slot.
Changer is Capable of positioning transport to Drive.
C:\> mct-x64.exe -d
Opening changer \\.\Changer0
Product Data for Medium Changer device :
Vendor Id : STK
Product Id : L180
Revision : 030
SerialNumber : 3077520000
For MCT utility we have the -m [MOVE] command to move media around inside the library.
-m [ElemType-T] Transport# [ElemType-Source] S_lot#/D_rive# [ElemType-Destination] S_lot#/D_rive#
Get / view command syntax for –m (move) command for changer 0
C:\>mct-x64 0 -m
Opening changer \\.\Changer0
MoveMedium : mct -m t N s\d N s\d N [Where s/d means Slot or Drive and N is ZERO based].
Some Examples:
mct-x64 -m t 0 s 0 d 0 (Using transport-0, move media from slot-0 to drive-0)
mct-x64 -m t 0 d 0 s 0 (Using transport-0, move media from drive-0 to slot-0)
mct-x64 -m t 0 s 0 s 100 (Using transport-0, move media from slot-0 to slot-100)
mct-x64 -m t 0 d 0 d 1 (Using transport-0, move media from drive-0 to drive-1)
mct-x64 -m t 0 s 0 ie 0 (Using transport-0, move media from slot-0 to IEPort 0)
Once you move a tape into a drive, use mytape commands Loadtape, taperewind, locktape, Disable hardware compression, Set block size to 65536 (64K), writeforspanning.
You need the symbolic name for the tape drive you loaded media into - look in the DPM console by clicking the tape drive and look at the details for
\\.\tape########. use that in the following command.
Mytape.exe \\.\Tape2147483638
Status: Getting the handle for \\.\Tape2147483638...Success
TapeConsole_1.0>taperewind">\\.\Tape2147483638>TapeConsole_1.0>taperewind
Status: Rewinding Tape ...Success
TapeConsole_1.0>setdriveinfo">\\.\Tape2147483638>TapeConsole_1.0>setdriveinfo
Hardware error correction [y]-Enable / [n] Disable : y
Hardware data compression [y]-Enable / [n] Disable : N (BE SURE TO DISABLE)
Data padding [y]-Enable / [n] Disable : n
Setmark reporting [y]-Enable / [n] Disable : n
Number of bytes between the end-of-tape warning and the physical end of the tape: 0
Status: Setting Drive Information...Success
TapeConsole_1.0>writeforspanning">\\.\Tape2147483638>TapeConsole_1.0>writeforspanning
Status: Writing onto tape...Failed !!!
Error_ID reported: 1100 (net helpmsg 1100
= The physical end of the tape has been reached.
Number of bytes written: 983040 (Ignore bytes written, we'll get physical tape position later)
Giving up
Time taken: 15788ms
TapeConsole_1.0>taperewind">\\.\Tape2147483638>TapeConsole_1.0>taperewind
Status: Rewinding Tape ...Success
REPEAT
TapeConsole_1.0>erasetape">\\.\Tape2147483638>TapeConsole_1.0>erasetape s
Short erase / Long Erase [s/l]:Status: Erasing the tape...Success
\\.\Tape2147483646...Success
c:\>mct-x64.exe -m t 0 d 0 s 0
Opening changer \\.\Changer0
Source is a Drive
Destination is a Slot
Move : Transport - 0, Src - 0, Dest - 0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
StorE steel 640GB - data error (cyclic redundancy check) message
Hi
I have had the StorE drive for a few months, so lots of data on it.
Today windows detects it as a local drive and when I attempt to access it I get a message telling me the disk needs to be formatted, when I select no, I get a message saying *data error (cyclic redundancy check*) message.
Help.
I have tried two other laptops, both give same response.
Thanks
GuyHi, thx for the reply.
I ran chkdsk see below.
C:\Users\DADDIO>chkdsk/f
The type of the file system is NTFS.
Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another
process. Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)
help!
Guy
Maybe you are looking for
-
i neeed help my ipad screen is non responsive
-
How can I check the version of my Airport Express and TimeCapsule machines ?
I want to look up the technical specifications of the routers in my wifi network (1 TimeCapsule and 3 Airport Expresses), such as maximum bandwidth etc. (my provider just increased maximum download speed but I am not seeing that difference on my mach
-
Sap authorizations in Webdynpro
I have a question regarding the use of authorizations from WebDynpro. We wants to use standard SAP authorizations when accessing the BAPIs through WebDynpro. For example: A sales person having a SAP logon should be allowed to see the data he would se
-
ERROR OGG-01163 Bad column length (8)
Hi , I am receiving the following error on the Target side( which have LONG data type. one of the tale name is IMAGE_TABLE) when replicating from 9i to 11g. Table structure is same but still following error persists on REPLICAT , Please help. 2012-02
-
9i, Linux RedHat and INSO filter not working
Hi, In October last year in this forum, How to position the applet information given was that one needed to download a path for bug N0 2037255 to get the filter to work. Talk was then about RedHat v7.1. The patch seems to be needed in our v7.3 as wel