Ipod didnt connect to itunes, ipod didnt connect to itunes

ipod did not connet to itunes.  Display as full charge, in a few minutes shows battery low.

See my response to your other post.

Similar Messages

  • I have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?

    i have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

    I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

    Place the iOS device in recovery mode using this program
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    http://jaxov.com/2010/05/recboot-iphone-recovery-mode/and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    Enter DFU mode without home button or Power Button | technoNix
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • So my ipod hasnt been updated in forever. when i finally decided to update it i plugged it in to the computer and it said some kind of error and also said itunes cannot connect to your ipod. i tried updating my itunes it didnt work any ideas?

    so ive dediced to update my ipod and my itunes said that they cannot connect my ipod i tried updating itunes and that didnt seem to be the problem. does anyone have any ideas?

    Oh and sometimes when restoring I get 'unknown error 2005'.
    HERE'S AN IDEA APPLE: SEND ME AN IPOD THAT DOESN'T BREAK ON THE SAME DAY I GET IT.
    Delivered On:
    Thursday,  06/07/2012 at 11:15 A.M.
    (from the UPS tracking site)
    DEAD AT: About 4pm

  • My itunes wont open at all, it starts to load then just goes back to as if i didnt try to open it. it wont even open when i connect my ipod

    I am unsure what happened to it, it started doing this yesterday but worked the day before. i tried to reinstall itunes and it didnt work doing it that way either. any help would be extremely helpful, i would like to add new music to my ipod.

    Refer to this article to delete SC files:
    iTunes for Windows in Windows XP or Windows 2000 doesn't open after upgrading
    http://support.apple.com/kb/TS1776
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime on Control Panel>Add n Remove Programs(XP) or Programs n Features(Win7/Vista)>highlight QuickTime, click CHANGE button, then REPAIR.

  • HT201413 im having problem with my ipod. it cannot be recognize with my laptop. how to fix these? i already tried ur suggestions here but still didnt work. and also it cannot connect to itunes. plese I really need a help.

    my ipod is not recognized by my latop and even not connecting to itunes. I also tried to connect to other laptop and it works. I think the problem is with the software, how to fix this? a big thanks.

    Update:  I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
    I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
    How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? Help!!

  • I updated my itunes before to a new version after this my ipod wont connect to itunes or my computer an wont charge now either, what do i do? i have reinstalled itunes that didnt work

    i have also tried restarting my laptop, resetting my ipod, an even messing with my anti virus spyware and that didnt work hellp!

    See:
    iOS: Device not recognized in iTunes for Windows

  • My ipod had a flat battery and turned off and i tried to charge it but it said to connect it to itunes, so i did that but it didnt work?

    Help. My ipod wont work. When it got a flat battery i tried to charge it but it wouldnt work and it said i have to connect to itunes so i tried that but something went wrong. Help.

    Hey Marlowejewel, you didn't state which iPod you have. Did you get anything be for your iPod quit working? Apple symbol with an arrow, error messages, or just the 20% low battery warning. If you try and turn it on now do you get anything? Have you tried a soft reset? Press and hold both the power and home buttons until the Apple logo appears, about 15 seconds+/-, then release both buttons. Anything?
    Here's a couple of general fixes, going with the idea that the battery is run down, in need of a charge. Inspect your iPod's charging port you're looking for damage, cracks, missing or bent pieces / pins. Is there signs of corrosion or foreign debris, like lint or dirt, (anything preventing an electrical connection). If so attempt to carefully remove the debris by blowing it out or carefully use a wooden toothpick to remove the debris. If port is clear and still will not charge, try a different cable. The lighting cables (iPod 5) have a history of failure, shorting out, but it doesn't mean the 30 pin type cables (iPod 4 and earlier) are immune from shorting out. If cable is not the problem, try a different charger and/or different cable. Or try the charger with a different outlet. Allow your iPod to charge for at least 30 minutes, then see if your iPod will function, if your iPod charges with a different cable or charger, there's your problem, then charge you iPod for at least 4 hours, (a full charge). If your iPod will not turn on even when plugged in and you know the charger is good as is the cable, then you may have a hardware issue or battery issue contact Apple and have your iPod evaluated.  Good luck, Cheers.

  • My ipod is telling me to connect to itunes, but itunes tells me that it can't connect to my ipod because it needs the passcode, but my ipod will not let me type it in..... i've restored it, but that didnt do anything. ? what can i do????

    PLEASE HELP.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I have an ipod touch 4,it said to update and restore,(didnt know it had to be turned off)now it just says connect to itunes on ipod,itunes said stuck in recovery mode and error2009,ipod wont do anything,help please

    I have ipod touch 4(8gb),iTunes said to update and restore(didn't know it had to be turned off),followed the steps and iTunes said it cant restore and error 2009.now ipod only shows connect to iTunes and wont do anything else,not even power off,please help.

    Try the troubleshooting for that error code on this page : Resolve iOS update and restore errors.

  • My ipod displaying , ipos is disabled connect ti itunes so i did and it didnt work

    need help

    Same answer as when you last asked the saem question:
    the ipod and the ipod sin creen remains saying need to connect to itunes. need help

  • I bought a used Ipod touch I deleted all settings and didnt have it connected to the computer now it wont respond

    I bought a used ipod touch I deleted everything on the ipod I didnt have it connected to my computer, and now all it does is shows an itunes logo with a plug, and I plug it into my computer and my computer doesnt recognize it.  How can I fix this?  Do i need a new cord?

    Try connecting the device to your iTunes library in Recovery Mode using the instructions in this Apple support document.
    http://support.apple.com/kb/ht1808
    B-rock

  • My wifi worked for over a year then my parents took my ipod away for a month when i got it back the wifi didnt work i tried resetting my network it didnt work (it also says im connected) any suggestions?

    my wifi worked for over a year then my parents took my ipod away for a month when i got it back the wifi didnt work i tried resetting my network it didnt work (it also says im connected) any suggestions?

    they might have changed the password for the netowrk ..

  • I cant turn on my ipod. i tried to Reset it by pressing the turn on button and home button but it didnt work. i connect to my computer and a prompt message said that my ipod is in recovery mode. what should i do?

    i think it all started when i dropped from 2meters high.
    When i connected it to my laptop, using itunes... my ipod's name turned into 'ipod'
    capacity : n/a
    software version: n/a
    serial number : n/a
    Help guys!

    Ouch! If it didn't break you are very lucky.
    Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the iPod in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • Just got a new IPOD Touch and it wont connect to our Wifi home network with a Belken N Router. Our router uses WEP 64 bit security, but had a "blank" password field, which the IPOD did not like. Changing to a 6 char numeric PW didnt help either.

    OS is whatever OS ships with current IPOD Touch
    I cannot understand why the APPLE engineers have designed this product so that it has SO MANY WIFI problems.  This is supposed to be an easy-to-use product.  We've had no problems connecting our new laptop, our ROKU box, etc, but it seems impossible to get the IPOD touch to work.  NOTHING LIKE SPENDING XMAS MORNING DOING APPLE TECH SUPPORT TROUBLESHOOTING TO LEAVE YOU IN THE CHRISTMAS SPIRIT!!!  Argh!
    In fact, the only way we have been able to get this expensive brand new IPOD to work on our home network is to DISABLE SECURITY in the router settings.  THIS IS ANYTHING BUT A GOOD IDEA.
    DON"T KNOW WHY BUT MANY OTHER USERS ARE REPORTING THE SAME KIND OF PROBLEM SO APPLE ENGINEERING NEEDS TO GET BUSY AND FIX THIS PROBLEM SO THAT NEW USERS CAN CONNECT TO THE INTERNET WITHOUT HAVING TO BE TRAINED ROUTER ENGINEERS TO DO IT!!!!
    Ok, sorry for the rant, but surely those of you who are experiencing this share my frustration.  This is not why I bought an APPLE product.
    IS THERE ANY POSSIBILITY THAT APPLE WILL NOT ALLOW A WIFI PASSWORD with more than one identical alphanumeric character?  Any ideas?  We also tried eliminating the 40 MHZ setting under Bandwidth settings in the router settings for our router, but it made no difference.  The router has the latest firmware, too.  Running out of ideas, and am ready to box this unit up and send it back!

    Thanks, Bob!  You are correct.  And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE).  One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
    1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind.  Only with the Security Mode set to DISABLED, could we gain access.
    2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
    Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers.  Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
    I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
    In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

Maybe you are looking for

  • Annoying separator page

    How to I stop the printer from printing the separator page?  HP4500 Officejet Wireless.  Windows 8.1 OS. In the properties, the device settings only allow for identification of the separator page, but not the option to omit. Thanks.

  • Cannot master to tape using Panasonic AJ-D95-dc DVCPRO 50 deck

    Hi, I started this discussion with Black Magic Design, whose DeckLink Extreme card I am using along with an AJ-D95-cd DVCPRO 50 deck using SDI in and out. The deck was on loan from a client. I could batch digitize from the deck - easy as pie. But I c

  • Camera roll did not download photos

    My camera roll did not download to my phone on icloud reset. Some pics from photo stream did but none on camera roll. ??

  • Upgrading 8.1.7.4 to Oracle 9i R2

    HI, I am asked to upgrade the above mentioned DB without using export/import . I am confused about one thing :- will I have to install Oracle 9i in a seperate home and then upgrade the existing DB or I will upgrade existing 8.1.7.4 S/W to 9i and henc

  • G4 powerbooks and Airport Express

    Apologies for rehashing what seems to be a common problem, but here goes anyway: Having managed to set up a good connection via (ethernet) ADSL to my ISP, checked on my 2 new powerbooks, I still cannot connect to the ISP through Airport Express. I've