IPod DIED when hooked up to Casio keyboard

I hooked up the audio out (headphone jack) on my iPod Touch 5th Gen to my Casio WK 240 keyboard audio in port and my iPod DIED  --- completely, totally DEAD. Cannot turn on. Hooked up charger -- nothing happens.
HELP!

Try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable                     
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • TS2771 my ipod touch when hooked up thru my car stereo fm transmitter sound only comes out on certain speakers

    I went to my lexus dealership and they tested my car, replaced and bought 3 different type of fm transmitters. But when I plug up my iphone 4 & my 5 it plays perfect through my car speakers. Could help me with some troubleshooting steps to elevate the issue? Oh, and I have restore to the device to the factory settings w/ the same outcome.

    Go in to the iTouch menu settings and turn off the speaker , and it will work
    samething happend  when i work in a customer vehicle we install the auxiliary input because the vehicle didn't have one, and after it was done i test the aux port with my nano and it works just fine,
    customer try his itouch and it didn't work  we try his mp3 in our display room radios and it didn't work
    until we found the problem in the settings
    good luck

  • My ipod died, when i connected it to charge it, it asked for a passcode, i tried everything, what do i do now?

    i have a lock password, but this isn't it...

    You should probably start with this article that has troubleshooting steps to try to help you resolve your issue.
    http://support.apple.com/kb/TS3221

  • When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and I get

    When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and I get the Mac OS X can't repair the disk error message. Then the spinning colored pinwheel pops up and I can't use iTunes. Please HELP!!!!!!

    Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

  • My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    Likely this:
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • HT4972 I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other?

    I was downloading $15 worth of iTunes songs from a gift card when my iPod died. Now, no credit & no songs on my iPod. Where did either my $$ go or my songs that I paid for disappear? How do I get one or the other? I have 2 of the same iPod's and logged onto both with the same as well as different apple ID's and passwords to each respective iPod and the completion of my downloaded songs has disappeared into thin air. Where did it go? How do I get the credit too re-download those songs to the correct iPod? Please help me!! [email protected]

    What happens when you try to redownload them?
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    On a computer go to iTunes>Store>View Account>Sign in and go to purchased history and see if you actually purchased them.
    Try redeeming the card again
    Contact iTunes
    Apple - Support - iTunes - Contact Us

  • I have an ipod 5 (IOS8) and two days ago my ipod died and when I tried to on it after charging it would turn on to the apple symbol and after about 5 minutes it would shut off. Another problem is that i also have a jammed home button.

    I have an ipod 5 (IOS8) and two days ago my ipod died and when I tried to on it after charging it would turn on to the apple symbol and after about 5 minutes it would shut off. Another problem is that i also have a jammed home button. Is there anyway i can fix my ipod?

    Try:
    Turn on without Home/Power Button

  • HT1353 I have the 2nd generation IPOD touch.  I have always been able to use apps such as Facebook and Pinterest.  However now it says I must have IOS 4.3 update requirement bit when I check for updates on ITunes when hooked up to computer says updates co

    My IPod touch 2nd generation always was fine with apps such as Facebook and Pinterest but now they say it needs updates IOS 4.3 but when hooked up says updates are complete and now I can't use some apps like Facebook.

    To my knowledge the second gen iPod touch cannot update past 4.2.1.  App developers are probably requiring newer versions of iOS for their newest apps.  Sorry, but your device is becoming incompatible.

  • Ipod only shows charging when hooked to computer

    When connecting to my computer via firewire port itunes does not recognize my ipod. I have ran latest updater software, reset settings on ipod. When i hook up ipod all it shows is the charging screen

    Welcome to Apple Discussions, Bruce.
    Are you using an Apple tested firewire card? Cheap firewire cards (including most onboard firewire) use the VIA chipset which does not work with the 'Pod. Best bet, as always, is to use the gold standard of iPod connectivity, the Adaptec 4300.

  • Why does my Ipod touch 4g battery die when i'm not using it?

    I've had it since December(Christmas) and it as already seen the screen of death.I dont know whats wrong with it the battery died when i wasn't even using it. How can i fix this, and is this covered in my 1 year warranty from apple.

    If the iPod is only sleeping and not powered off, the battery can significantly drain overnight.
    Yes, the battery is covered by the 1-year warranty.

  • On my ipod touch, when i go on my game it pops up with a message saying "FlurryAppCircle: Attempting to pass blank hook name to getOffer. Please use a non-blank string for hook name" what does it mean?

    on my ipod touch, when i go on my game it pops up with a message saying "FlurryAppCircle: Attempting to pass blank hook name to getOffer. Please use a non-blank string for hook name" what does it mean?

    Try:
    iOS: Troubleshooting applications purchased from the App Store
    Contact developer/go to their support site.

  • Casio keyboard wakes up iMac whenever it is turned on

    we hooked my son's Casio keyboard to our new iMac, but whenever he turns the Casio keyboard on or off, it wakes up the iMac (even though we are not using the computer when this happens. it is a minor inconvenience to have to run over to the iMac to put it back to sleep when this happens. is this bad for the iMac?

    Your going to have to unplug the keyboard from the mac if you don't want it waking up when it's turned on and off. But it's not going to hurt your imac... well is seven or eight years it may make a small noticeable impact but don't worry about it.

  • Nano won't respond makes high pitched humming sound when hooked to cable

    I'm beginnign to feel jinked. lol This is the second Nano I've had since October. The first was returned because of a defective battery and promptly replaced. Now to the current issue.
    This Nano has acted erratic from day one. The hold button malfunctioned immediately, but functioned sporadically. It would not "hold" the Ipod when I turned it on and the hold icon wouldn't appear when this happened. Then it appeared to never actually turn off when I tried to turn it off, although it would have a blank screen. Instead it appears to go into pause. This is proven out by the fact that the battery power goes down quickly from use to use. Then it just faded out and died as if the battery was drained. BUT, the computer (all three of them) wouldn't recognize the Nano when hooked up to the charging cable it came with. Now it is emmitting a high pitched humming noise, has a blank screen and the computer still won't recongnize it.
    I sent this Nano back already for repairs. It was returned to me UNREPAIRED with a note saying no problems were found. There is ABSOLUTELY something wrong with it but unfortunately for me it decided to come on right before I shipped it to Apple. I assume that is why it appeared to be functioning.
    I have yet another repair request in for it but my confidence level about it's eventual repair or replacement is sinking. The most frustrating part of this is I LOVE this product. It was a greatly appreciated addition to my workout routine and other music needs. Any advice would be greatly appreciated.
    Gateway   Windows XP Pro  

    I forgot to say I tried the 5 r's, called tech support, have been ALL over this forum, and have even asked other nano users I know for tips.

  • How can I keep my ipod files when connecting to new pc?

    When connecting ipod to this new pc, (other one died), it says it wants to sync my files and that it will delete what is on the ipod.
    This is the only files I have left since the others were on the old pc.
    Is there a way to save this music before it gets 'resync'd'?
    Thanks for your help

    Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. There are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    If you have any iTunes Music Store purchases the transfer of purchased content only from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay:
    Back up your iTunes library by copying to an external hard drive

Maybe you are looking for

  • Windows 2008 R2, converting to dynamic disk questions

    Hello,    I have a Windows 2008 R2 server and I want to convert the drive into a dynamic disk for mirroring.  The disk currently is divided into two partitions.  The C: partition which is System,Boot, Page File, etc. and the D: partition which is dat

  • Mountain Lion 10.8.2 (Hosts File Locked)

    In OS X Lion 10.7, I had edited my Hosts File to prevent certain web-sites from loading and would like to access them again, however I have noticed that in the latest update of Mountain Lion 10.8.2 the "/private/etc/hosts" file is locked and cannot e

  • Lost ADF Projects when deploying BPM 11g project

    I've run this across a couple other people who are using Oracle BPM 11g. Both have run into the issue but aren't sure what they did to fix the issue. I've been able to successfully deploy the ADF projects in my project successfully until this afterno

  • Lost ability to use AEBS

    Wall Street running 9.2.2 and Lucent Silver PCMCIA card. AEBS was set up under 10.4. This setup worked fine during previous several months. Recently switched over to encripted operation of the AEBS and that worked fine with my MBP. Today tried this s

  • Related to pdf in WebDynpro

    Hi All, I have a header table in my application.On lead selection I am navigated to another view called Detail View.I want to see the details of the detail view in PDF format.How can I do the same,please reply Regards Pawan