Ipod Dies overnight EVEN WHEN TURNED OFF

Background info:
The Ipod after fully charging can last around 8-9 hours of USE (straight music playing) so the battery seems to me like it is fine as it holds a nice long charge of use.
BUT when I turn it off fully charged as I go to sleep, it will be dead in the morning. Its like it uses the same amount of battery whether its playing music or turned off. Now I know its supposed to be using some battery because the pod is not fully 'off' but clearly it should not be dying at the same rate it is playing.
I have done the 5 Rs to no avail. I thought I had found the problem from an alarm I had set because on a different forum people said that can drain battery along with calender alarms. Made sure I had none of these turned on even tried the 5 Rs again and after all of this still no go.
Is the only explanation that my battery is dead? Then why does it hold such a long charge? And I would hate to buy a battery replacement only to find out that it is something else. It ***** because my warranty is long expired and I cant even post at the apple forums (unless I am just dumb and cant find the 'New Thread' button.
But does anyone have any solutions? It is REALLY bugging me.

Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
and http://www.apple.com/support/ipod/service/battery/

Similar Messages

  • After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping

    After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP

    Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
    Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
    and http://www.apple.com/support/ipod/service/battery/

  • Satellite P855-10G runs out of battery even when turned off

    Hi everyone,
    I have bought the Toshiba Satellite P855-10G, but im terrified because he runs out of battery even when turned off..
    Anyone knows how can i solve the issue?
    Best regards,
    Igor Tarelho

    Hi
    Access the BIOS and turn OFF the options like: Waking up on LAN and Keyboard.
    In Toshiba HW Setup I recommend disabling the USB Sleep and Charge function as well
    Both enabled options might allow discharging the battery even if the unit is OFF

  • IPhone battery discharges even when turned off since iOS 5.1.1

    Since updating to iOS 5.1.1 I have had battery problems, discharging at around 4% per hour even when not used. Turning off every concieveable service and reloaded iOS as a new device unfortunately has not solved the problem. I have resorted to leaving the phone plugged in all of the time and recently started to turn it off overnight. To my surprise, the phone continues to discharge when turned off! I couldn't find this problem when I searched (apologies if I didn't search hard enougth!)

    I have been waiting for months for the next iOS to see if it would rectify my battery drain problem but I continued to have the battery discharge problem after installing iOS6 .
    My Home button has been playing up with random no responses and random double clicks, so I replaced the home button hoping that may also address the battery drain issue - no joy.
    Then I had a look to see if I had added any Apps when the problem first appeared at the time of upgrading to iOS5.1.1. (You can view Apps by date in iTunes on the iPhone Apps tab.)
    It turns out that on about the same day as the iOS 5.1.1 update I also added the Lifesize ClearSea video conferencing App. Today I disabled the App in iTunes (unchecked it) and resynced the iPhone. I believe this removes the App from the phone whilst leaving it in my iTunes so I can add it back easily. For the first time in months my phone is now cold rather than luke warm.
    Superficially at least it seems that ClearSea has been running in the background, even when manually quitted and even when the iPhone was powered OFF! I will report back in a few days to confirm this was the culprit.
    Five months with a phone that barely lasts a day has been a real pain...

  • Ken Burns effect remains even when turned off

    I'm having huge problems viewing slideshows with iPhoto 5. I cannot get the Ken Burns effect off, even when it is not selected, and when I select a small number of photos to show, and click view slideshow, the music starts, but only the first photo appears. Has anyone else seen these problems? I've tried replacing the iPhoto preferences, but that did not help. Thanks.

    Thank you for responding. I guess I did not pay strict attention to turning off the Ken Burns effict in both places. One other thing that made it peculiar was that the first slide would display and then it would wait for several seconds before showing the next slide even though I had set it to display each slide for only 2 seconds. I'm wondering why that was? Could Spotlight have been indexing the drive and slowing things down? It seems OK now. Also, strangely still, when I click on the red X to close the window of iPhoto, then entire application quits. The whole thing is acting quirky. Comments most welcome. Thanks again.

  • Mini fan runs even when turned off

    Yesterday the fan started running loudly (seemingly top speed) and it won't stop even when the computer is turned off (only way to kill it is to pull the power cord). The vents on the bottom have a bit of fuzz on them, but nothing outrageous. Other than working on the motherboard (which I'm not capable of doing), what can I try? I did reset PRAM...nothing changed.
    Thanks!

    Is the power/sleep light on or off when the Mini is "off" but the fan is running?
    If the light is "on" in some fashion, can you start the Mini by pressing the Menu button of your Apple Remote once?
    If you can't do this, I fear you have a logic board problem similar to the one first diagnosed by brisbanebazza:
    http://discussions.apple.com/message.jspa?messageID=9524465#9524465
    Unless you know someone who can do electronics soldering, generally the fix for this would be to replace the logic board, which is usually too expensive to be economical in my opinion.
    BTW, no harm in gently vacuuming the fuzz out of the vents, with the Mini closed up, not open.
    After you vacuum, you might also try something wacky: try running the mini upside down for a short period of time.

  • Mac Pro Power Supply making noise (even when turned off)

    Hi everyone,
    My Mac Pro Early 2008 (Dual quad core 2,8) began to make noise a while ago and it drives me mad.
    The sound is (100% sure) coming from the Power Supply. The sound is not mechanical, but electrical, like an oscillator crackle sort of.
    First I thought it was the PSU itself, so I had it replaced with a new one, but that did not change the situation.
    The (new) PSU makes excactly the same noise, even when my computer is turned off (but still connected to the power socket in the wall).
    I've eliminated all possible factors that could create an interference (other electrical devices).  I even completely switched off the power of my office, except for one power socket; the one I used to test the Mac.  As soon as I connected the Mac, as soon the noise came back. So, it's got to be inside the Mac.
    So my question is: if it's not the PSU, nor the power of my office, what could it be?
    PS: I've tried a UPS too... but that did not change a bit.
    Thanks for your suggestions!

    Hey
    I appreciate the attention and help from you guys. I installed hardware monitor and this is what tells me:
    Ambient Air 22
    CPU A Heatsink 28
    CPU B Heatsink 29
    CPU Core 1 27
    CPU Core 2 30
    CPU Core 3 29
    CPU Core 4 27
    Expansion Slots 32
    Hard Drive Bay 1 30
    Hard Drive Bay 2 25
    Hard Drive Bay 3 24
    Hard Drive Bay 4 24
    Memory Bank A Point 1 38
    Memory Bank A Point 2 44
    Memory Bank A Point 3 44
    Memory Bank B Point 1 37
    Memory Bank B Point 2 44
    Memory Bank B Point 3 48
    Memory Module A1 65
    Memory Module A2 65
    Memory Module A3 62
    Memory Module A4 54
    Memory Module B1 69
    Memory Module B2 65
    Memory Module B3 59
    Memory Module B4 57
    Northbridge Heat Sink 63
    SMART Disk Maxtor 6V300F0 (V60E4NQG) 41
    SMART Disk ST3500630AS P (9QG0H24P) 31
    Do you have any suggestions? is it safe to find a program to regulate the fan of the power supply down or can this damage the system?

  • Bug that allows match to use cellular data even when turned off in settings?

    Earlier today, I mysteriously incurred overage charges on my phone bill because 200MB of data was used while I was on my bicycle. My phone was in my bag. Before I left, I had tried to download an album to my phone from iTunes match cloud storage. It would not download, so I left. Cellular data was turned off in iTunes match settings. Has anyone encountered Match overriding that setting? All cellular data settings for the app store were off and I was not running any GPS function.

    I have the exact same problem!
    I'm using the iPhone 5 now under Carrier M1 Singapore 13.0 and I have noted that over a period of 2 weeks, my cellular data usage has been about 2.7GB on an average. Since I know my bill has been capped at 3GB, I have since switched off my cellular data.
    However, when I switched it on for a few days after using it for awhile, my cellular usage jumped by 1.2GB in just 1 day! And I used it as I would on an average day (like during an average day in the 2 weeks)!
    I understand that there have been reports of a bug that have caused this problem in the US.
    http://www.technobuffalo.com/companies/apple/iphone/verizon-iphone-5-cellular-fi x/
    http://www.iphonehacks.com/2012/10/iphone-5-cellular-data-usage-over-wifi-bug-on -other-carriers.html
    But I'm hoping that there's a solution for those living in Singapore? Do I seek the help from my carrier as well? But if it's a problem with the phone, then my carrier definitely would not help, right?

  • Windows 8 Requires a Password on Wakeup even when turned off

    I have turned off "Require password after wakeup" everywhere I could find.
    I've disabled it in regular power settings (clickable link on the left) and for the current power scheme I'm using.
    Still whenever I open the lid on my laptop and my computer wakes up, it keeps asking me for a password.
    Is this a known bug?
    I thought it might be because I was using a Windows Live account, but it still occurs with my local account.
    Windows + Q doesn't open Power Options for me, it goes to the app screen.
    I have no "Troubleshooting" options available to me.
    Mind you that I'm running the RTM version because our company is a Microsoft partner and this version has been made available to us, so the options you mention may be missing or in other places.
    Okay, let's continue with what I've tried. I've disabled the "Require password on wakeup" setting in Group Policies, but the problem persists. When I go to the regular power options it shows "some settings can't be changed due to restrictions
    on the computer" so I know the GPOs are working.
    The comboboxes for battery and plugged in both show NO for the "require password" option. I've also used the User Account troubleshooting tool from the Release Preview and it shows no problems with my account.
    So it seems to me there has been an unfortunate change in the RTM if this problem doesn't occur in the Release Preview.
    Maybe it's time to submit a bug, but I don't know how, I would just like this to be fixed.

    Hi,
    I tested on my computer that is running Windows 8, but I havenot encountered the same issue.  Could you please test the following thing.
    1. Disable Require Password after wake up in Power Options.
    2. Manually make the computer into Sleep Mode by the Power options in Charm bar rahter than close the lid.
    3. Wake up the computer and check whether the issue persists.
    Juke Chou
    TechNet Community Support

  • New 8 Core MP passing power to firewire ports even when turned off???

    Is anyone else noticing this? Even after you have turned the power off to the MP 8 core, power continues to travel through the firewire ports?

    Some FireWire functions work with the computer off. See:
    <http://developer.apple.com/documentation/HardwareDrivers/Conceptual/HWTechFireWire/Articles/FireWimplementation.html>
    and
    <http://developer.apple.com/documentation/HardwareDrivers/Conceptual/MacPro_0801/Articles/ProductDeveloperNote.html#//appleref/doc/uid/TP90005242>
    "When in sleep, the Mac Pro has 25 W of power available to the USB and FireWire ports, and memory. If the combined USB and FireWire port power load exceeds the available power, power to those ports will be cut to preserve memory."

  • How do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    how do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    You didn't say which model of iPod Nano that you have, but generally there should be a lock setting, that can be turned on or off, to prevent accidental changes in settings. And, there is also a setting to turn on or off a feature called, "Shake to Shuffle." It allows you to change songs by just shaking the iPod.

  • Ipod nano 6 gen hangs when turning off the backlight. That is, it doesn't respond to button presses on the touch screen.

    ipod nano 6 gen hangs when turning off the backlight. That is, it does not respond to button presses on the touch screen. He also has just a white screen instead of the desktop display. Tried to rearrange the screen from another Ipod nano, but nothing came of it - all the same ... What should I do?

    Hi Rc_Drifter,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod nano. Restoring the device may resolve the backlight issue as well.  
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Display shows a white screen
    Try putting the iPod into disk mode:
    Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    I hope this information helps ....
    - Judy

  • My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

    my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Ipod looses power when turned off

    ipod looses power when turned off

    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Likely a bad battery
    Apple Retail Store - Genius Bar

  • My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off. I recharged and reset. What else should I do?

    My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off.
    It disappears when turned on. It must mean something. I recharged and reset. What else, if anything, should I do?

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

Maybe you are looking for

  • Domain Controller cannot access \\domain\netlogon causing Auth issues

    Hi everyone, I have been spent all day trying to figure out what is going on here, I have a Domain controller (only DC in the environment) that is acting funny I first noticed when I was attempting to RDP into a server in my domain I was getting "acc

  • Tomcat to J2EE .... how to convert?

    Hi Guys I have been using tomcat for a while to do my School's Java Servlets and Jsp projects. Now my school require us to use only J2EE for my final year project. Im quite lost... i have done the tutorial for J2EE but still unsure how to make an exi

  • Redundancy for startup class.

    Hi, I have a startup class in weblogic server. This class acts as a daemon inside weblogic server. What happens if this class goes down due to an exception after a while ? does the weblogic server brings it up again or can we configure it or is it ju

  • Can I have 2 roll over triggers in the same space.

    Is possible to have 2 roll overs in the same space.  I would like to have the user roll over a given space and have an image appear in one area and a text box display in another.  Currently it seems only the top trigger is recognized by the system.

  • Comma Separated File

    Hello Experts, I am working on Interface, where i have the data in Internal Table. Now I am required to transfer the internal table data into Comma separated file with extension  '.csv' . I used the FM 'SAP_CONVERT_TO_CSV_FORMAT' and provided the de-