IPod display blank!! What's the problem??
My iPod's display is suddenly blank. The ipod can still be recognized in iTunes. I charged it up ful night just to be sure that it is not the battery.
I am able to switch ON the iPod but nothing displays on the screens. Some random clicks of the scroll wheel and I am able to play songs too.
I have tried resetting it but still no use. No cracks or lines on the display. Just the backlight comes on but nothing displays.
What is wrong please help??
Windows Windows XP
Hello
Try resseting it
hold the middle and Menu bottom for about 10 seconds until the apple logo will appear (apple)
If not, try this: ipod Service
http://depot.info.apple.com/ipod/
Chris
Similar Messages
-
All CAPTURE AND PRINT files saved on my mac are blank -what is the problem
I installed the Capture & print Add-on on my Macbook Air and captured areas of several web pages and saved them to a folder on my desktop. All the add-on files are blank with zero data captured.
What must I do to remedy this.
Many thanks for assistance.
Ant JohnsonHow did you save them? Did you paste the captures into an image editor and save the image?
Support for that extension can be found here: http://forums.mozillazine.org/viewtopic.php?f=48&t=2318993 -
I am trying to restore an ipod to the factory settings. However I get a message that my username or password is incorrect. I am using my correct Apple id and password. What is the problem, please?
Was that Apple ID and password the original owner of the iPod? If not, try using the Apple ID and password of the original owner.
-
My Ipod touch is frozen. The screen shows only USB cable with arrow point to the word Itunes. What is the problem? This is the second touch I have had that has this same problem. HELP!
This time try restoring the iPod to factory defaults/new iPod instead of from backup. You may have some corruption that is causing the problem and it may now be in the backup. If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.
-
hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center
And the answer is:
williamfromlongueuil wrote:
we have the same itunes account in game center
You need to have your own account... DUH.... -
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
My iPod Classic will no longer allow me to create podcast playlists. It create music playlists. I've restored it twice. What is the problem?
Is the problem that you can create them in iTunes, but they are empty on the iPod itself? If so, I had that problem, and the issue appeared to be that playlists that used MediaType=Podcast didn't seem to transfer. If, on the other hand, I gave all podcasts a Genre of Podcast, it worked better. In general, with the older iPod classic, I found that playlists based on MediaType didn't work that well.
-
IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?
If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock -
I am trying to use pages. When I open a document and begin entering text, nothing shows up on the document. I cannot see what I am typing. What is the problem and what am I doing wrong.
Thanks Jerrold. But I am opening a word processing document. The same thing happens when I select a blank layout page. I try to put in shapes and nothing appears. When I click around on the blank word processing document the verbage will appear in a green color but when I type, I still cannot see what I am typing. I have tried to uninstall and reinstall and this did not help.
Thanks Again -
This mini is operating OSX 10.6.8 and trying to update to Mountain Lion but upgrade stops and a black overscreen displays saying to power off and power on. The upgrade fails. What's the problem?
Hi Fred,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks
my laptop is Windows 7 and ip is this
192.168.102.12
255.255.255.0
192.168.102.1
DNS
192.168.254.2
192.168.254.3
in ipod touch 4g is DHCP and its showing
ip address 169.254.192.139
subnet mask 255.255.0.0.
remaining all blank -
Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.
discoveriweb wrote:
This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
Which means that you are only considering half of the problem, but that's your choice.
I'm out. -
I have recently downloaded some songs to my 3rd generation ipod touch. I have home sharing. Normally when I turn my macbook pro on and click itunes the items I have purchased automatically download. But this time some songs did not. What is the problem? What should I do?
Hi there,
I would recommend taking a troubleshooting steps found in the article below.
Troubleshooting Automatic Downloads for purchased Apps, Music, and Books
http://support.apple.com/kb/ts3688
-Griff W. -
My iPod shuffle says that there are 9 songs on it, but it will only play two of them. What is the problem and how can this be fixed?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have downloaded the Creative Cloud and when it finished, it opened up and was completely blank. Nowhere for me to sign in and no apps for me to click to download. I need this to be fixed ASAP. What is the problem here?
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html -
Hi, i just bought a ATV2. The ATV2 works find but does'nt display my Itune account. I have everything shared. What is the problem ?
Whar do you mean by "show up on my display "?
Go to Finder>General, is External disks checked?
Maybe you are looking for
-
JSF webapp works with Java 1.4, but not Java EE 5
Hello I am having a really weird problem with internationalizing my JavaServer Faces web application. I am using Netbeans 6.0, Tomcat 6.0.10, JSF 1.2, and JTSL 1.1.... If I use Java 1.4 to run the webapp, everything works fine! If I use Java EE 5 the
-
Thunderbolt to AV receiver and on to HDTV
I am trying to play movies through my new Yamaha RX A-2010 AV receiver from my Macbook Pro via the thunderbolt connection converted to HDMI. The receiver recognises the sound, but the laptop does not see the HDTV through receiver. As a consequence, n
-
Storing XML data in CLOB and relational tables
I would like to ask whether there is a possibility to store XML data using normal relational tables and CLOBs in the same time. For example I have some XML data (structured data) which I would like update very often and some which are only a kind of
-
Cisco 3850 Switch Management Port - ACL on VTY
Hi, I got these switches. Switch Ports Model SW Version SW Image Mode * 1 32 WS-C3850-24T 03.03.02SE cat3k_caa-universalk9 INSTALL 2 32 WS-C3850-24T 03.03.02SE cat3k_caa-univ
-
Is there any limitation for PXI 5670 to generate QPSK signal?
Hi, I would like to select PXI 5670 to generate the QPSK signal in my system. How does is it make the QPSK modulation?As I understand, QPSK modulation would need to have two AWG to generate the I and Q signal. See below: But PXI 5670 only integrated