Ipod dock connected to my usb time capsule port?

Is it possible to sync my ipod connecting it to the usb port of my time capsule?
Will itunes see my ipod this way? or just and external HD?
I'm actually out of usb ports, so it would be great if i can do this.
Thanks!

I would recommend a USB hub instead. I don't know if it works but if it does it will be painfully slow for what you are doing.

Similar Messages

I can't connect my WD to time capsule

hello, i've a problem, my WD "my book for Mac" don't connect to time capsule usb port.
When i try to connect to time capsule, airport app tell me the following: Must repair the disk.
How i can connect my WD to time capsule??
Best regards.
Pedro Pino

What TC model and firmware is it?
WD mybook are generally ok.. but the unpowered type will have problems.. you need a powered hub.
And some of the older TC will not handle all versions of some products.. WD keep changing them around.
It is often hard to figure out what works and what doesn't.
I am trying to assemble a database here.
USB drive compatibility with Airport Routers. Help make database.

Connected my printer to time capsule how do i get it to work on my computer

i am trying to connect my printer so that everyone can print to it. i connected it to the time capsule, hoew do i get my mac to recongize it

We don't know.....and you do not indicate.....whether your printer connects to the Time Capsule......
Using wireless?
Using Ethernet?
Using USB?
Would be helpful as well if you could provide the make and model number of the printer.

How to connect Brother HL2270DW to Time Capsule wi-fi

How to connect Brother HL2270DW to Time Capsule wi-fi?

Well,
1. tried (vide setup manual for the printer) letting the printer find the wi-fi:
http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/00200 0/000037/faq002037_011.html?reg=us&c=us_ot&lang=en&prod=hl2270dw_all#ForMac
Didn't work.
2. Then discovered, by clicking around, under Airport utility > Base station > Add WPS Printer that
"There are two ways you can allow a WPS printer to join your password-protected network without entering a password. You can either enter a PIN for the printer, or allow access to the first printer that attempts to join you network.
Before trying either, brought the printer physically close with the Time Capsule (within 2 meters)
Tried the "First attempt" option first. Failed.
Then, miraculously, out of the printer came a sheet with a 8 digit PIN code on it. Which enabled trying the 2nd option "Allow WPS printer by: PIN".
Entered PIN and Continue, but to no awail.
Final attempt was made by connecting the printer to the USB port of the T.C. That generated a fresh printout with another 8-digit PIN. Which was duly entered, again with no result.
Am at my wits end. Anything else that could make the twain meet and restore normalcy in this all too Apple-dependent house?

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

Connect apple tv to time capsule with ethernet?

How do you connect apple tv to time capsule with ethernet?

Oh, that's so sad. . Im sorry, but this problem requires professional help. At least I can't help you. Here is a link to Apple - Support - Contact Support.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

I can Connect my iPhone to Time Capsule network, but I Cant get internett on it??

Download 5.6 utility for Lion.. inbuilt version is hopeless.
http://support.apple.com/kb/DL1482
Set TC and wireless names to short, no spaces, no special characters.. ie pure alphanumeric.
Lock the wireless to fixed channels.. only 2.4ghz matters.. as iphone cannot connect to 5ghz.
Try 6, 11 first then 1. I think bluetooth may be set to use lower channels.
That seems to have fixed it for most people.

OK to connect a Mac to Time Capsule simultaneously by wifi and cable?

I just added macbook to my airport network hosted by a time capsule. Next, I want to run an initial time machine backup of macbook onto the time capsule via an ethernet connection.
Should I shut off airport on the macbook before wiring it to the time capsule? Or can the software happily handle two simultaneous connections between newmac the time capsule, one wireless, the other wired? If so, is Time Machine smart enough to realize that it should use the faster wired connection?
Thanks!
Tom
Message was edited by: tttny

Shortly after posting this question I realized that it should have been posted in the Airport>Time Capsule forum. I've repeated the question in that forum and request that replies be posted there. http://discussions.apple.com/thread.jspa?threadID=2489542&tstart=0

2nd generation ipod shuffle not recognized by usb 3.0 port, 2nd generation ipod shuffle not recognized by usb 3.0 port

Hi,
My 2nd generation ipod shuffle will not connect to any usb 3.0 port. I've tried on to computers -- one Windows XP and the other Windows 7. Any ideas?

Hi
I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
I really hope this helps.

IPod dock connected to both firewire and usb at same time

I have 3 ipods, 3G 4G 60gb photo 5G 80gb vid. I have a 5G doc and a dual usb / firewire cable. I prefer to manage my 3G and 4G using firewire as it is oh so quicker. However 5G requires usb2 only. I have a Apple 'dual' usb/firewire port cable that at the moment to use I alternate which socket is plugged into the front port of my PowerMac G5 as they are the only spare ports I have.
I just bought an Iomega Ultra Max which comes with a built in firewire and usb hub that means i now have enough ports to dedicate one of each to the ipods but want to use only one dock and so I would like to plug both the firewire and usb iPod cable into the hub and leave them there connected to the iPod dock. I know it won't cause problems when the 5G is connected as there is no hardware for firewire connection. But the 4G has both.. will I encountering a usb and firewire conenction cause problems and possible damage to the ipod or my PowerMac G5, will the 4G ipod use firewire in prefeance to USB if it will work???

Hi iPodista;
I would recommend very strongly that you don't even attempt do this. Generally cross connecting in this fashion is a very good way to get yourself into serious troble.
Allan

How to eject a usb connected disk from a time capsule device

hello,
i am currently using Time Capsule to backup several mac computers on a network. i would like to use the Archive utility to clone a copy of the Time Machine backup to an external usb device. i plan to purchase two external usb disks for this purpose, and swap them on occasion. how do i safely eject the external usb disk when i want to swap these drives? i don't see a way to do this in the Time Capsule documentation, but perhaps i am missing it. thanks.

That is because you installed a later version.. without realising that later versions removed all the useful tools.. but look much prettier..
Don't you want pretty.. if you want useful.. try this.
How to load 5.6 into Lion or ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Install directly into Lion you are done.
For ML, click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

Ipod dock connected to my usb time capsule port?

Similar Messages

Maybe you are looking for