Ipod doen't work anymore

This morning when i woke up my ipod touch didn't work anymore.
nothing work restore,home and sleep button itunes doen't reconize it anymore
please help....
sorry for my bad english

If your iPod is still under warranty Apple will replace it.
If you've got an Apple store near you make an appointment at the genius bar and bring it in.
If you don't you'll have to google for the support address for your part of the world and email them.
They'll email you back with instructions.

Similar Messages

  • TS1702 My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

    My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

    What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.

  • Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore.

    Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)

    What do you mnean that the screen does not work?
    When you touch the screen the iPod does not respond?
    Nothing shows on the screen?
    Or what?

  • HT201210 My Ipod will not work anymore its just the apple showing could you please help me restart

    My Ipod will not work anymore its just the apple showing could you please help me restart?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1212 what if the computer i synced the ipod on doesnt work anymore

    what if the computer i synced the ipod on doesnt work anymore?

    To not lose anything:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My lock button on my ipod touch doesnt work anymore

    My lock button on my ipod touch doesnt work anymore please help it works fine otherwise well and the battery is all the sudden dying really fast and these 2 problems started at the same time.

    - When you depress the button does it feel like it is working?  Could something gotten in the space and jammed the button?
    - Can you reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Have you tried restoring the iPod from backup via iTunes on your computer.
    - Next would be to restore the iPod to factory defaults/new iPod
    - Last, make an appointment at the Genius Bar of an Apple store.

  • One more to the list of people that suddenly the Ipod is not working anymore. It does not turn on, I read some of the ideas, I can see that is something that comes from apple somebody could solve it or should we unitforces to demand a solution from apple?

    My Ipod is not working, It was working find and suddenly it does not turn on anymore. It does not responde when it is plugged in. I can see it is not the first case, somebody has received an answer that works? Some similarities in the ipods? thanks for your help.

    Have you tried a reset?
    iPod touch User Guide (For iOS 4.3 Software)

  • Radio in IPod doesn't work anymore?

    I bought a radio remote which I have been always using in my IPod until one day it doesn't work with my ipod anymore.
    The radio option is not visible in the menu. What's weird however, is that the remote still works - I can navigate through my songs list, turn up/down the volume and when I connect the earphones on the jack, I can still hear music. I've tried connecting the remote to other ipods and it works.
    Is there anyway I could have this fixed without changing the whole board?

    You have to use the ipod Software Updater to restore your ipod. if you're using itunes 7 (or 7.0.1) then you can simply restore the ipod from the iPod Summary Screen. if your ipod is not showing up in itunes or you're using an older version of itunes then you should download the iPod Software Updater from: http://www.apple.com/support/downloads/ipodupdater20060628forwindows.html
    Then connect your ipod to your computer and open the Software Updater and click Restore. Hope this helps.

  • Right click doen't work anymore

    I installed Essbase 11.1.1.3 with the Excel Addin and Smart View. I have Office 2007 but I tried also Office 2003.
    The problem is that now the right click on a Excel page doesn't work anymore. It doesn't show the menu.
    Is this a normal behaviour?
    What I have to do? What is a possible solution?
    Thanks in advance.

    Essbase add ins - Options - global tab - enable secondary button (checked)

  • Ipod is not working anymore i closed it and it does'nt want to open anymore.I am not able to recharge it neither.What is that problem?

    I closed my ipod and it is stuck i cannot open it anymore and not even able to recharge it.Even when i connect it in the computer it does not work.What is the problem with this?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • What do I do my Ipod is not working anymore?

    okay so about less than a year ago my iPods screen broke and I paid $100 to get a refurbished one, so now it's been a while and it's not working properly anymore. I need to touch things several times before it can open the app, also the music app is not working I already tried everything possible even changed it back to factory settings but it's still the same. So now the problem is I want to change my ipod, yes I bought the 2 year warranty AppleCare but I have not transferred the warranty to the refurbished ipod so I need to figure that out. thanks any help is appreciated.

    The AppleCare should have transferred automatically. Check you coverage here:
    Apple - Support - Check Your Service and Support Coverage
    If not transfered then you have to contact Apple
    Contacting Apple for support and service
    Since you said yo restored to factory settings/new iPod and still have the problem that indicates a hardware problem.

  • The top power button on my iPod touch doesnt work anymore. What do I need to do to fix it or figure out why it all of a sudden stopped working??

    The power button on the top of my iPod touch no longer works. I cannot turn my iPod on or off. How do I fix this problem or figure out what caused this to happen?

    - When you depress the button does it feel like it is working?  Could something gotten in the space and jammed the button?
    - Can you reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Have you tried restoring the iPod from backup via iTunes on your computer.
    - Next would be to restore the iPod to factory defaults/new iPod
    - Last, make an appointment at the Genius Bar of an Apple store.

  • Ipod touch not working anymore.

    My ipod touch 3g has seize to work properly. This all started when i restore my ipod from the setting ipod we area. After i did this, my ipod stayed on the itunes logo with usb screen. I tried doing a restore through itunes, but keep getting error code 1604. I have tried various methods to try and fix this issue, like restoring it from a different computer, putting it in dfu mode, etc. Since none of this works, i decided to go to apple support and get online service so i can get a replacement or get it fixed. Turns out, when i go to the last step in the process, i recieve a message that states that the service is not currently available, and that i should try again later. Anyone able to help me out on this? I don't want to pay for phone support because apple is obligated to give me online support since i still have a year warranty. Dont want to go a apple store since the closest one is 2 hours away. Thank you.

    I have exactly the same problem.Tried same restore methods with same results.Got in touch with a local sevice specialist and they couldn't help me.The next problem i have is that my ipod is 1 month out of warranty and at £300 i'm not happy at all.If anyone could help it would be appreciated.Thank you

  • Ipod will not work anymore

    My ipod says: Use iTunes to restore
    I have plugged it in to the computer and nothing shows up on my computer. I have tried the suggested things it says to do and nothing works.

    I would try and get the iPod into Disk Mode. You can learn how to do that here: http://support.apple.com/kb/HT1363
    If you are able to get it into Disk Mode, you should be able to get it to show up in iTunes, and then you can restore it.
    Hope I helped! Good luck!

  • Ipod no longer works anymore

    I've had it for about a year, nullifying any warranty probably. I plug it in recently and nothing will pop up. It's like it isn't even there. No lights are flashing, nothing. It is charged all the way, but it isn't detected at all. I'm ****** cause 2 weeks ago I could put any song on to it, but now the **** thing won't even work. I think I may have misaligned something when it was bent by another usb 2.0 wire, and once i was able to bend it to the point of breaking and i barely saw an orange transfer light appear for a second before dying.

    i hope someone has an answer to this i have the same prob

Maybe you are looking for

  • Can I assign more than one Pricing procedures to the one vendor.

    Hi Gurus, Can I assign more than one Pricing procedures to the one vendor. If possible, where it can assign &give the procedure. My client requirement is : Vendor supply the goods from two different countries. So, pricing procedure is different becau

  • How to use 2 apple id's in iphone

    can i use 2 apple id's in my iphone ..................together

  • External Storage Drive problems

    I am new to iTunes so am slowly learning. I have a Seagate external HDD that I have put all my music on It is connected directly (via Firewire) to the PC that I use iTunes on but is also available as a drive on my home network. I have directed iTunes

  • Ios 7 wifi connected but not working

    my iphone 5s running ios 7 is connected to my home wifi but its not working, but my pc is doing fine on that wifi. and when i try connecting my iphone to other wifi it seems to work without any problem. i've reseted network settings many times and re

  • Multiple Upload not triggering properly for WorkFlows

    Hi All, I have set UploadEvent to some WorkFlow and am testing by uploading documents. When i am upoading single file using upload tab in content Services , WorkFlow process is getting triggered properly. But when i am uplaoding multiple Documents at