IPod does not display music in the Cloud

I'm at my wits end to get my iPod to see the 5500 selections in the Cloud. I've reinstalled iTunes, I've restored the iPod software backing up first, and restored the iPod software with no backup and resynced. Nothing worked. If I manually sync to iTunes with Match turned off, I get the full library on the iPod. When I turn Match back on in the iPod, Match wipes the library off the iPod, as advertised, but then displays the iCloud icon for a few seconds, then an empty library and "No Music. You can download music from iTunes." Nothing I have done has produced an iPod that sees the Cloud. I haven't seen this problem on any discussions or help sites so far, and have not called Apple Tech Support directly, hoping to avoid a fee. HELP! I've wasted two days trying to make this thing work.

Hello All, and especially to Michael Allbritton,
Well, for what it is worth, I finally got the Cloud music appear on my iPod. It took a lot of tweaking and fixing of three different iTunes accounts I had, including ensuring I was using the right account on both the iPod and the MacBook. I had mismatches between the two devices, PLUS I had differing account passwords on the two devices. It took a while for me to track all this down, partly because of my own confusing naming conventions,, and partly because it takes time to redo the whole Cloud process or restore an iPod, which I did several times. Patience paid off.
So it is working now. Whether it is all working absolutely correctly or not, I don't know because I haven't delved into the details. But at least I have my music stuff working on the iPod without 30+ Gigs of storage used up.
One other thing; I noticed on some of the posts that members were flaming others for explaining what worked for them which caused others to use the technique to have to go back to square one. We are all in the same boat on this new technology, and personally I have run through the installation, sync, and reformatting the iPod a number of times, using various suggestions form the community. Don't shoot people for trying things out and reporting what happened to them. Don't expect to be an early adapter and not have glitches. Don't expect every solution offered to match your specific problem. And for gods sake read the f*cking instructions Apple has already posted on what does what to whom. It isn't rocket science, and asking basic questions in this forum seems to be a waste of time when the answer is already on web.
Just my opinion. I could be wrong.

Similar Messages

IPod does not play music from the beginning

Hi there!
The music is properly good on the hard disk of the PC.
The music is imported into iTunes, where it played well from the beginning.
On the iPod, the music is also available.
When playing the music now as follows:
The title starts 6-10 seconds from the start, just after this time the song is played from the beginning, for about 6-10 seconds, then the title is a play on. Then from 12-20 sec from the beginning.
I hope the wording is somewhat understandable.
Thx for help!
PS: "Remember Position" is not enabled; Start time on each track is 0:00

Good evening everyone!
The problem is solved.
It was because of the ZoneAlarm firewall software!
Somehow, the music is cut up by plan no why ...
Firewall uninstalled, delete music from iTunes and the iPod, newly imported gesyncht = works
Thank you very much for your attention!

IPod does not display album cover art

I recently updated to iTunes 9 and also bought a new MacBook Pro. Then I synced my old iPod color with my new Mac. Since then my iPod does not display the album art work anymore. I was looking through iTunes 9 for the option to display the artwork on the iPod because I remembered that setting from older versions but could not find it. Does iTunes 9 just asume my iPod can't display covers because it is a 4th gen even though it is the color version?

hi mduran, no i could not find any solution. My iPod (60gb, probably the same as yours) is filled to the top and has been before the iTunes update and then it worked fine. I think this is a bug in iTunes. It's interesting to see that this happens in the Mac and Windows version of iTunes. Is there any way of telling Apple about that so it will be in the next update?

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

User does not have access to the Cloud Service Type

Where do it edit the access the the user? How do i fix this problem?
"messages" :
"hint" : "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'" ,
"stack_trace" : "oracle.sysman.emInternalSDK.ssa.cloudapi.CloudSecurityException: User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.routeToServiceType(EMCloudServlet.java:180)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.perform(EMCloudServlet.java:235)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.performPost(EMCloudServlet.java:385)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.rest.AbstractRestServlet.doPost(AbstractRestServlet.java:137)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:727)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:820)\n\tat weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)\n\tat weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)" ,
"text" : "Could not route to the Cloud Service Type 'dbaas'. The exception stack trace should provide some information about the reason of the failure" ,
"date" : "2012-12-04T12:27:11+0000"
}

I'm trying to create a new DbPlatformInstance using the EM12c Cloud API but i keep getting an error "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance'
Below are the request and response.
REQUEST:
POST /em/cloud/dbzone/D7EEE339C1249F83FC4587C722EB20B5
Authorization: Basic xxxxxxxxxx
Content-Type: application/oracle.com.cloud.common.DbPlatformInstance+json
Accept: application/oracle.com.cloud.common.DbPlatformInstance +json
     "name" : "Database 11.2.0.3.0 Instance for SSA_USER_1",
     "description" : "Instance 2 of Oracle Database 11.2.0.1.0" ,
     "based_on" : "/em/cloud/dbplatformtemplate/B59EDC65951039E8E040E50A8F5B0435",
     "params" : { "username": "xxx", "password" : "yyy" }
RESPONSE:
Response Headers:
Status Code: 403 Forbidden
Connection: Keep-Alive
Content-Language: en,en-us
Content-Type: application/oracle.com.cloud.common.Messages+json; charset=ISO-8859-1
Date: Tue, 04 Dec 2012 14:38:08 GMT
Keep-Alive: timeout=5, max=100
Server: Oracle-Application-Server-11g
Set-Cookie: ORA_SMP_EM_AUTH_-4568676491231894381=52W7Q2KQ5w5FTn8MQYrZ3Hqp5QnqBLkNwVKvHSS728pMzyQpxJpd!352643837; path=/em; secure; H ttpOnly
Transfer-Encoding: chunked
X-ORCL-EMOA: true
X-Oracle-DMS-ECID: 004o0VGXIE08XrqpKK4Eye0001P_00009q
X-Powered-By: Servlet/2.5 JSP/2.1
x-specification-version
Response Body:
"messages" :
"hint" : "User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'" ,
"stack_trace" : "oracle.sysman.emInternalSDK.ssa.cloudapi.CloudSecurityException: User 'DBAAS' does not have access to the Cloud Service Type 'dbaas' resource interaction with method 'POST' on accept type 'application/oracle.com.cloud.common.DbPlatformInstance' and content type 'text/plain'\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.routeToServiceType(EMCloudServlet.java:180)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.perform(EMCloudServlet.java:235)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.EMCloudServlet.performPost(EMCloudServlet.java:385)\n\tat oracle.sysman.emInternalSDK.ssa.cloudapi.rest.AbstractRestServlet.doPost(AbstractRestServlet.java:137)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:727)\n\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:820)\n\tat weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)\n\tat weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)" ,
"text" : "Could not route to the Cloud Service Type 'dbaas'. The exception stack trace should provide some information about the reason of the failure" ,
"date" : "2012-12-04T14:38:09+0000"
}

Music app does not display some of the artists' names correctly

It's so annoying. I have a few artists, whose names are not displayed correctly by the music app. In the following, I'm gonna take the band "Annisokay" as an example.
I, first of all, had this artist named as "annisokay". Everything was alright. Today, I decided it would look better with a capital A, so I changed the name to "Annisokay". I synced my iPhone with iTunes and checked the music app afterwards: In the music app, the name is still displayed as "annisokay". I connected the iPhone to my MacBook again and checked the "On this iPhone" tab in iTunes. There, the name is correctly displayed as "Annisokay".
I've tried deleting all the music on the iPhone and syncing it again, restarting my iPhone, deleting the music from iTunes and importing it again, changing the names to some gibberish and changing it back again, but nothing worked!!
So, to sum up, whatever I'm trying, in the end the artist's name (Artist & Album Artist) is defined as "Annisokay" and is displayed like that in iTunes itself and in the "On this iPhone" tab, but in the music app on the iPhone it's "annisokay". That's very annoying. Has anybody else ever encountered this problem? Is there someone who can help me to solve it?

Hi Phani
Attached please find the ini file as requested.
I look forward to your response.
Kind regards
Mark
Geometric Progression
Cutting thru complexity
Tel: (+2721) 794 8332 or (0861) 000-615
Fax: (+27 11) 252 8089
Website: <http://www.gpifm.com/> http://www.gpifm.com
Authorised FSP (Licence No: 43224)
Bankseta accredited (No:557066)
BOTA accredited
<http://lnkd.in/sybY4S> linkedin3

Ipod does not play music

HELP!HELP!please someone
heres the problem
my ipod DOES NOT PLAY MY SONGS
i have reset my ipod countless times
i have restored it countless times
can someone, anyone help me!!!!
PLEASEEEE!!!!!

sorry im just angry that my ipod is being dumb.
okay for a long time now my ipod does not play my music. when i click on a song the track doesnt move it just stays 0:00 -3:35. so the songs show up on my ipod but they dont play. ive reset it, restored it and nothing works. i think its because i left in charging for a month strait, so maybe it over charged, cause it worked fine before that

Itunes store does not display with in the itunes player, why?

I have latest iTunes download. I have PC with Windows Vista. My system requirements are what they should be for the iTunes player. I have gone through all of the troubleshooting that i am willing to go through to make this work - Can someone !! Tell me why does the iTunes store NOT DISPLAY with in the iTunes Player?
I click on the iTunes Store from the iTunes player...center screen with in the player shows that its "Accessing iTunes Store" when its finishes - the screen remains blank! and stays like that...
Again why does the iTunes store not display with in iTunes?
Also , my Safari acts the same why...i open the browser and the Screen just sits there never finding, opening, or access anything from the web...YES I am connected to the internet? SO why does Safari sit there...

http://support.microsoft.com/kb/972034
This worked for me.
Reset HOSTS File back to defaults

Time Machine does not display old files: the star wars screen stays stuck

I have been looking for an known report, but can't find it.
In Time Machine, I don't see the 'star wars' panels anymore. It was working when I installed it.
In an activated Timemachine screen, the date slider on the right of the screen does not react. Only the front most screen is seen = "now".
I used to have time machine on an airportextreme; but because of adding a shared USB printer I had to move the external HDD to my own iMac.
Time machine tells the backups are successful.
Did I do something wrong by moving the HDD around?
Did I do something wrong with 'permissions'? [I added myself as a user with read permissions.]
Should I reinstall Timemachine?
thanks in advance
albert

alberti-nl wrote:
Hi, and welcome to the forums.
I used to have time machine on an airportextreme; but because of adding a shared USB printer I had to move the external HDD to my own iMac.
Time machine tells the backups are successful.
Did I do something wrong by moving the HDD around?
Sort of. Time Machine stores backup differently when they're done locally vs. over a network.
Double-click your external HD. It should have a "sparse bundle" including the name of your computer. Those are your network backups.
Double-click the sparse bundle to mount it, then try Time Machine again. If that doesn't work, quit Time Machine and control-click the TM icon in your menubar, or right-click the TM icon in your Dock, and select the +Browse ...+ option. That should show your backups in a small window; select them and click the +Use Selected Disk+ button.
Post back with your results and we'll explain further and see how you want to proceed.

My Ipod does not display any music

Hello,
I plugged my iPod into my dad's computer the other day. After this I noticed that my iPod said: No music.
It seemed like everything had been erased (although itunes never asked if I wanted to sync) except for the pictures.
When I look at the memory, it still shows the same amount of GigaBite as before I plugged it in. But instead of 30GB music and 50GB video it shows 80GB miscellaneous.
Does anyone know how to fix this??
Thanks
Sylke

If a hard reset of the iPod doesn't resolve it, your only option is to connect the iPod to an iTunes library and restore it to factory settings. The iPod's hard disk or software could be damaged or corrupted.
To reset the iPod, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Problems, trying to use backup from 5.1.1 iOS Gen 3 iPod does not sync music to 4th gen iOS 6 iPod.

My 3rd Gen iPod's headphone connector is basically shot, I've had it for around if not over two years now; sometimes I'm surprised it lasted this long; since I am not one who usually listens to her music without headphones, this is problematic, .
Luckily, a family memberI know had a gen 4 iPod, 32g, same space amount as my old one, lying around that they don't use anymore, thank goodness.
Well, in one case, not so much. First of all, said iPod was locked with a passcode (the passcode was guessed so many times because no one could remember it, it locked permenantly) so I had to completely wipe it. However, it wasn't so bad, though all the information was lost, I could finally use iOS 6 on an iPod.
Well, iOS turned out to be a huge problem, in the way of synicing my old backup. I have about, um, an estimated 3000 songs on my 3rd gen iPod, that of which are not all on one computer, and are from multiple computers (my desktop / laptop); I thought all the songs would transfer over with the rest of my things. I didn't think the iOS made a difference.
Lo and behold, I was dead wrong.
When my iPod was restored to my previous backup, it had no music, only my pictures and apps were added. I'd call 'it annoyed me' an understatement. I waited all that time for the ipod to restore and the backup to finish, only to get my one hundered pictures and two apps.
I have tried to look up how to extract music from my iPod, but to no avail, my computer recognizes it as a camera and I can only access the picture files; the way I read you have to do it online, you must be able to actually get into the iPod's folders, besides the picture folders, and I can't seem to do that; there was an option in earlier versions of iTunes that allowed the iPod device to be displayed as something other than a camera but it no longer seems to be an option in the new iTunes.
All the programs for extracting files, specialized for iPod file extraction, actually, cost money, which at the moment, I don't have much of, this iPod was given to me by a family member, and I'm lucky I even have it. Manual extraction is also something I've tried but failed miserably at, as mentioned earlier.
I'm really not up for re-synching one by one, I want this to be as quick and painless as possible. I have the available GB for my 3000 songs (I checked). Most of my songs are mp3s, and some are m4as. Not everything is bought, and not everything is going to be able to be downloaded through iCloud on account of the fact that there are, uh, over 2GB worth of songs, so does anyone have any solutions to my problem here? I have over 50gb in my desktop library alone, loads more in my laptop library, and I really don't feel like separating all the songs from my previous iPod into a single playlist, if there's a more efficient, free solution out there....
This would not have been a problem in the first place, if the passcode was not there; but blame the previous owner of the 4th gen iPod for that. She typed it so many times it locked her out. And so, I had to reset, but not without an automatic update for iOS 6, which my gen3 can't update to, because it's, well, outdated.

Connect the iPod to your computer and update to iOS 6.1.3. You need iTunes 10.7 or later on the computer.
iOS 4: Updating your device to iOS 5 or later

I have airplay on my iPad and when I click the airplay button it does not display iPad in the list, so that I can bypass airplay so that I can get sound on my iPad.

I am trying to find out how to get the restore the option to choose iPad from the airplay button.

I hope what I am telling you responds to what you would like to do.
As one of the respondents mentioned, you can't use AirPlay. What was not mentioned is you can use HomeSharing.
You need to activate Home Sharing on both your computer's iTunes/Prefs/Sharing and in Settings/iPod in the iPad. Using the iPod app, select your computer's library and initiate any requests (music) on the iPad.
Personally I believe Airsharing and Homesharing are some of the worst work I've seen come out of Apple. Its inconsistent between devices and is needlessly complicated by having two different capabilities essentially doing the same thing. Throw in the Remote app and you now have three capabilities essentially doing the same thing with different interfaces and inconsistent functionality.

60gb iPod does not see music files on my external HD

I'm going nuts trying to figure out why my iBook does not see the music files on my external HD.
I have a 250gb external hard drive (that I put together with an enclosure and HD I bought from Tiger Direct). I have the hard drive hooked up to my G3 iBook via Fire Wire. The HD comes up on the desktop, but none of the files are seen. Now, when I take the same HD and hook it up to my Windows PC, all my music is there.
I really don't want to have my iPod hooked up to my PC. My G3 is too small to hold all the music. I need to have the external HD to handle all the music for my iPod.
How do I accomplish this on my G3?
Thanks!
iBook G3 Mac OS X (10.4.7)

Hyphen says:
[The] drive can be formatted as fat32 and be read/written by macs. He could also partition it, one partition as hfs+, the other as fat32. This can be done from disk utility.
The NTFS format (windows) has only read support for OS X.
How did s/he copy the music on the external drive? Was the music on his/her pc? If yes the hierarchy may be different for the pc version of iTunes library, or is it that he can't find the files even from the finder?
And Red Dwarf adds:
Just to add to hyphen's reply, FAT32 has a maximum size of 32GB. The user cannot make the partition larger than 32GB should they decide to go down that route.
Another alternative is a utility called TransMac. When installed on a PC, it will allow the PC to recognise a Mac OS formatted drive and read the files within. No need then to worry about all that FAT32 and NTFS malarky stuff. It weighs in at $64 dollars though for a 1-3 user licence:
http://www.asy.com/
So hopefully, with Kappy's help, too, you will be able to figure it out.
Good luck.

Ipod does not show any of the files I have put in it

Hi,
I have been using my 5G iPod 60 GB for sometime now. I had lot of songs, photos and videos in it. All of a sudden it does not show me any of these files. My music, photo and video folders are empty. It shows my iPod capacity as 1.3 MB when I go to view the settings>about. I have tried reseting the iPod few times by pressing the center and menu commands together a few times. Any help is appreciated. Thanks

Exporting is the wrong procedure.
In Lightroom, right-click on the photo and select Edit In

Ipod does not play music in play after...

Hello Guys...
I have this problem... In the night I connect my ipod to the computer to charge while I am working, in the morning I browse in the ipod menu but when I play any music file, the screen shows the "play symbolo" but the song does not play, I press "pause" then "play" but not works, after it, I reset the ipod pressing the "menu and center" buttons, after it, works good.
In the day when I dont play music for couple hours and try again, the problem comes again.
The question, any solution?
I have 5th ipod generation, 30G, ipod software 1.2.1, iTunes (last version) 7.1.1.5, windows xp.
Thanks in advanced for the help.
JMP
5th Gen 30Gb. Windows XP
None Windows XP

Hello,
I have the same problem ...
Could you help us please ?
Thanks.
PBD

IPod does not display music in the Cloud

Similar Messages

Maybe you are looking for