IPOD does not do anything but click

Hi,
I have got a 2gb nano, it has been plugged in to charge, and it does nothing.
I had the apple logo flash up, then kinda die away and fade, then all the ipod has done is click. I have tried restore, rest ect, the pc does not see it anyway so i can't do any of it as it won't turn on.
Any ideas?
I have let the battery die totally, and then charged it, and it makes no difference....
It just clicks when it is plugged in to charge.....and when you press the buttons.....even if the hold button is on...very wierd and annoying as it is the second one i have had die on me

Seems that your iPod is carrying very low battery, which stop it to get charge with a computer. Try to put it into disk mode and connect it with your computer (but ac charger if possible). Again worth to try an USB and Firewire cable both (without hub).

Similar Messages

HT1369 Brand new computer with Windows 8.1 will not sync with iPod Classic 120G. Windows does not recognize anything but iPod Touch? Is there a simple sloution?

Brand new computer with Windows 8.1 will not sync to iPod Classic 120G. Windows does not recognize anything but iPod Touch? Is there a simple solution. Diagnostics have run and failed to point to a fix.

Might be worth tearing down the whole iTunes install and starting over...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

My little sisters ipad mini is disabled, it does not say anything but that no plug into itunes or countdown, however it is connected to my mums iphone apple account, she can not lose anything as its for work, how can i fix this???

my little sisters ipad mini is disabled, it does not say anything but that no plug into itunes or countdown, however it is connected to my mums iphone apple account, she can not lose anything as its for work, how can i fix this???

Follow these instructions to resolve a forgotten passcode:
http://support.apple.com/kb/HT1212

IPod does not play anything. But...

My iPod video will not play anything. It doesn't freeze, it doesn't skip, it just won't play anything. The buttons are functioning, and I've tried the 5Rs, it just won't play anything. The time stays at 0:00, and I'm able to do things like go back to the menu, and change the volume. I've viewed the other topics on the forum, and restoration has worked for all of them, but not me. The songs are from CDs that were lawfully purchased. Any help is appreciated.

Have you tried a reformat in Windows (FAT32, not a quick format) and then a Restore in iTunes?
Also, after doing this and before syncing, Deauthorize your computer in the Store menu, play one of your iTunes Store purchased songs and when prompted enter your Apple ID and password. Now sync the iPod.

HT1363 screen on my classic iPod does not show anything and cannot restore

Brand new iPod Classic and the screen has gone blank...unable to restore, some error message pops up, not pleased with this product as this is the third one in a year! Any ideas how to rectify this problem?

Connect the iPod to the computer and try to restore the iPod via iTunes.
If iTunes does not see the iPod, place th iPod in recovery mode and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
If that does not solve the problem you may have a hardware problem and an appointment at the Genius Bar of an Apple store is inorder. I doo not like that the corner gets hot.

SCCM 2012 MP does not monitor anything but the central site

Hi,
We've tried implementing the SCCM 2012 MP (5.0.7804.1000) to monitor our SCCM 2012 SP1 setup running on Server 2012 from our SCOM 2012 SP1 setup.
Everything imports fine and after ~30 minutes the servers are discovered and appears.
After a while longer the central site and the SDK-service shows up as monitored but the resto of the 5 DPs and all other server roles remains unmonitored even after 3 days.. ..?
All the agents are set to enable proxy.
The SCOM servers runs with one service accounts and the agents with different action accounts.
The SCOM action accounts on the SCCM-servers all run with the same domain service account with administrator-privileges on the SCCM-servers but no permissions within SCCM.
Does the action account need any specific permissions in the SQL DB or in SCCM? To be part of any specific role?
Any advise is greatly appreciated :)

We have resolved this issue, I'm not exactly sure how we resolved it but what I think fixed the problem for us was creating overrides for the object discovery rules contained in the MP.
See my blog on our implementation: http://damonjohns.com/2014/07/01/monitoring-configuration-manager-2012-r2-with-the-scom-2012-r2-management-pack/
My blog contains a screen shot and all the values I changed.
You may ask why we increased the rate at which the hierarchy discovery rule executed with an override? Well
in part it was due to:
A. Us having the issue and
B. I was sick of trying to trouble shoot the event log error that by default only registered every 6 hours.
After I created the overrides, the MP started discovering data. It wasn't immediate though, it took another 6 hours or so for it to start working correctly. I think what might be happening is that one of the discovery rules is not completing correctly which
causes the others to fail - hence no data. I have no idea why shortening the time on the discovery objects made any difference. But...it worked for me.
Cheers
Damon

TS3474 ipod does not turn on but it does when its in a dock

hi there i have the ipod nano 6th gen i just today it wouldnt turn on when i wanted to listen to it but when i plug it into my ipod dock it works fine plays music fine but as soon as i take it off the dock it doesnt work no music comes through the headphones. is there any way i can fi it without having to send it away to get fixed

So the iPod only powers on when connected to an external power source such as a USB port on your PC or Mac or when connected to a wall charger? If so, that is a very good indication that your iPod's battery is shot and in need of replacement.
Apple can swap it out for a flat fee or you can send it to a third party repair service for a bit less.
B-rock

My nano ipod will not do anything but flash the apple logo. Help?

I have tried ever diagnostic tool available. Have reset it many times. Have even done every troubleshooting thing it suggests to no avail. I just got it for Xmas and am very frustrated having spent all day yesterday trying to fix it.

Hello Everyone,
Although this resolution seems ingenious I must let you know that exposing your iPod to freezing temperatures can cause serious harm and it will void your warranty. Please see the following excerpt from the iPod Safety Guide available at Apple.com.
Keeping iPod within acceptable temperatures
Operate iPod in a place where the temperature is always between 0º and 35º C (32º to 95º F). iPod play time might temporarily shorten in low-temperature conditions.
Store iPod in a place where the temperature is always between -20º and 45º C (-4º to 113º F). Don’t leave iPod in your car, because temperatures in parked cars can exceed this range.
When you’re using iPod or charging the battery, it is normal for iPod to get warm. The exterior of iPod functions as a cooling surface that transfers heat from inside the unit to the cooler air outside.
Have a great day!

My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Sync does not sync anything

i have re installed win 7 in my laptop but given different name this time and downloaded firefox. I then signed in to sync. All seemed ok and the message popped up that it would syn momentarily. It does not sync anything. but in syn option i can see firefox connected to my account.

Give it a few hours for the initial Sync to be completed.

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

Hi Nealeh
Thanks i think I got it working of a fashion.
Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
The scenario is:- say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
Had she had a normal skimpy bikini on, no problem!
If i don't solve it, she will get fired!
Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
"Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
I have Safari on this iPad. Guess that is all it runs.
So technology is not my friend today!

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

I just purchased Export PDF to Excel and it does not export anything usable. Your terminology should not be "export" but paste image, which is of no value. Please cancel my account and refund my money. What a shame you would advertise this as a product.

Hi pgrillo,
I'm sorry that you're disappointed with your ExportPDF subscription. I checked your account, and see that the order is still processing. As such, I'm unable to cancel it for you myself. However, a Customer Care agent can take care of your cancelation/refund quickly. Here is the contact information: Contact Customer Care. Click Still Need Help? Contact Us at the bottom of the page to find both phone and chat support options.
Best,
Sara

IPad syncing stays on step 5 of 5 "waiting for items to copy" but does not copy anything... should I restore the iPad?

iPad syncing stays on step 5 of 5 “waiting for items to copy” but does not copy anything... should I restore the iPad?

Hey, I was having the same problem,, i just got mine to work. Take off everything but your apps (meaning take off pictures, music, ringtones, movies, tv shows, etc just leave on the apps) Then go up to the top and go to Store and turn off Genius. Restore your iPhone (It'll ask you to back up, click yes.) Restore from back up, Let your apps come back then when those are done add each category one by one. (i.e. click Photos -> Sync Photos and let them finish, then click something else like music) Hope this helps!

IPOD does not do anything but click

Similar Messages

Maybe you are looking for