IPod does not function well. i need help!!

I got this iPod, bought frm korea. Tried to dwnld songs in it. Wen connected to computer, it doesnt come out in iTunes. It comes out at mycom. Wen i dwnld songs manually, it cannot be play & my ipod went blank and turn off. went i connect it back, the files are corrupted and ther are viruses on it. itried evry solutions on the internet. i even format it wic i shud not do it. i need help. & this ipod doesnt look like an original one. since i bought it overseas, its hard for me to find a service product here.

As you now know, it appears you have a fake iPod.
http://discussions.apple.com/thread.jspa?threadID=972344&tstart=0

Similar Messages

  • After upgrade firmware my iPod does not respond to touch. Help me!

    After upgrade firmware with iTunes my iPod does not respond to touch.
    To be more precise - works, but very, very bad. And around the icons on the display is visible GRAY line of width 1 px.
    Please HELP me! This iPod - the gift for my girl.
    p.s. Maybe this problem arose because I reflash iPod with old cable from the iPhone?

    Thanks all, i solved the problem yourself.
    I helped this one topic: http://discussions.apple.com/thread.jspa?messageID=12641053&#12641053

  • Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

    I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
    Clients access through iPlanet Web Proxy (SUN/Solaris).
    Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
    MyClass class = new MyClass();
    <%= class.getHtmlCode() %>
    the size of the form is variable (100Ko to 1,5Mo)
    When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
    If i call the page without proxy it work.
    The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
    Please need help

    Originally Posted by scum
    Hey All,
    Need some help with ZDM7 PXE preboot services.
    Currently running a netware 6.5 server in VLAN1
    PXE client sitting in VLAN2.
    DHCP Server is running on VLAN3
    IPHelper is running
    DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
    I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
    I watch the top of the screen where the Timeout counts down and eventually gives this error.
    "Error: The server did not respond as requested in time
    ZENworks shutting down...
    Press any key to continue..."
    This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
    if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
    not sure where to go from here.
    help please ;)
    leon
    Hi Leon,
    If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
    The server running PXE, I assume it also runs the TFTP and Imaging services?
    These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
    Cheers,
    Willem

  • Code does not make any effect:need help

    hello friends,
    now i am going to describe the problem i am phasing
    actually i have embedded japplets in a jsp page(appletjsp) and want to communicate japplets indeed jsp to a servlet in the diffrent derectory but in same context root.
    moreover, i have written code at applet and servlet side both. actually there is a next button in one of japplets(embedded in appletjsp) and i have written the code(for servlet communication) inside button's mouse clicked event. and at servlet side, as usual i have got an inputstream from request and want to forward this request(after getting request dispatcher) to another jsp page(proposing to display this jsp page after clicking next button inside appletjsp ).
    now the problem that made me a bit confused is that when i click next button after running jsp page(containing japplets) then neither there is any error/exception at server/IE's sun java console nor any effect of code at servlet side.
    actually i am not sure that the servlet side code does not make any effect rather it is ony my assumption.
    although i am very new in java and as what i know, to send back response to client side, servlet class needs to be run at server side and probabbly for that there must be a sepreat request from client's applet to server(please dont flame me if i am wrong).
    so please tell  me how can i get running another jsp page running(to which i trying to get request dispatcher inside servlet) after clicking next button?
    applet code
            try{      
            String[] data    ={"santosh","kumar","tripathi"};        
            String strwp ="/UASProject/RegistrationData";              
            URL jspURL = new URL(getCodeBase(),strwp);             
            System.out.println(jspURL);
            URLConnection jspCon = jspURL.openConnection();               
            jspCon.setUseCaches(false);
            jspCon.setDoOutput(true);
            jspCon.setDoInput(false); 
            jspCon.setDefaultUseCaches(false);   
            jspCon.setRequestProperty("Content-Type", "application/x-java-serialized-object");      
           BufferedOutputStream bos=new BufferedOutputStream( jspCon.getOutputStream());
            ObjectOutputStream oboutStream = new ObjectOutputStream(bos);             
            oboutStream.writeObject(data);         
            oboutStream.flush();        
            bos.close();
            oboutStream.close();        
         //  getAppletContext().showDocument(new URL(getCodeBase().getProtocol(),getCodeBase().getHost(),getCodeBase().getPort(),"/UASProject/faces/Editpage.jsp"),"_self");        
         }catch(Exception e) 
           {System.out.println(e);}servlet code
             try { 
                    //    response.setContentType("application/x-java-serialized-object");
                         BufferedInputStream bis=new BufferedInputStream( request.getInputStream());
                        ObjectInputStream inputFromjsp = new ObjectInputStream(bis);                                      
                        reg_data = (String[])inputFromjsp.readObject();                             
                        out.println(reg_data[1]);
                        bis.close();
                        inputFromjsp.close();    
                       HttpSession session =request.getSession(true);
                      session.setAttribute("first_name",reg_data[0]);
                        getServletContext().getRequestDispatcher("http://localhost:8084//UASProject/faces/Editpage.jsp").forward(request,response);
                   } catch (Exception e) {e.printStackTrace();}    although this topic has been made too long, even then please fix my problem.
    thanks

    When you formatted the system you erased everything on the harddrive, obviously, and so its just a matter of putting back the Apps and data that you want from your Backup that you made, BEFORE reformatting the harddrive.  You did make a backup, didn't you??   Your Time machine or other external harddrive backup can be used with Migration Assistant to return the iLife Apps to the iMac.  If he indeed purchased the iLife Apps from the App Store, then you would need to use His Apple ID account to redownload them; not yours.
    Oh, and to answer your other question, no, iLife is not a part of any version of OSX itself.
    Hope this helps
    Message was edited by: Radiation Mac

  • I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

    I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
                                                                                                                                                     Thanks

    Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace.  Since you say iPhone 4, was this a used or refurbished iPhone? 

  • TS3899 New Iphone5 will not allow me to send email.  Says "does not allow relaying"  I need help.

    I am unable to send emails on my Iphone 5.  Says "does not allow relaying"  Any suggestions as to how I can get this resolved?

    Try deleting the email account an readd it, this time add it under the "other" tab.

  • IPod does not sync music. Please help before I die. LOL

    ok so i plug in my usb to my iPod after i dragged the music into itunes from folders and what not and you know usually when the music syncs it will till u the title of the songs and stuff at the top while its syncing right? well i add a lot of new songs and it just says that its syncing but doesnt show the process of it being synced...then when it says done i go back in my ipod and the new music isnt there...i've reset the pod a bunch of times..restarted my computer..reinstalled iTunes..i dont know what else to do..if u can help me it would b greatly appreciated..thank you!!

    *i've reset the pod a bunch of times*
    Have you tried "restoring" your iPod? Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to sync using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • IPod does not play well with left speaker

    I have tried several ear buds as well as stereo's for playback with my iPod. The left speaker plays at about 1/2 as loud as the right speaker in all these devices. This has happened with 2 seperate iPods. I've downloaded songs from 2 seperate PC's to the iPod and still get the same results. Has anyone else experienced this?

    hmm mine does the same thing from time to time but with the right speaker...I thought it was the car stereo I was playing it through but I've tried a few sets of headphones to discover that it must be the ipod itself.
    I've discovered that this is an intermittant problem - the ipod will either work fine or produce only 20% of volume throught the right speaker. The problem doesn't come and go while you're listening to it, but when you turn the thing off and come back to play music or video later - it either works correctly or it doesn't.

  • Does not belong here, but need help

    OK, first off i know this doesnt belong here, but there is more traffic on this fourm. On iChat it says u can one-way video chat...
    http://www.apple.com/pro/tips/onewayvideochat.html
    Well i dont know what is up, because i think i have the latest version on iChat, but when i click on the "buddies" tab the "one-way video/audio chat"(s) doesnt exist. Does it on anyone elses? If u can help me please do!

    Beats me.
    I don't know whether that's an old tip (previous version of iChat AV) or a time-warped message from a future OS update.

  • My brand new Ipod is not working.  I need help!

    I cannot get help from Apple, so here goes.
    I purchased an Ipod for my daughter from this site for Christmas. We charged it and it seemed to be working, we downloaded the songs from Itunes on it. Then it appeared to have battery or charging issues. Now I can't even get it to turn on. This is getting very frustrating.

    To get it to restore you use an application that is installed from the CD that comes with the iPod... can you find this and run it with the iPod connected. If it is able to see the iPod just go for a full restore that should get your iPod back to the beginning and you will have to add the music again. If the software tells you no iPod is connected and you know it is maybe you will have to contact Apple or an Apple Store, as for being helpful I have approached them several times with ailing mac problems both inside and out of warranty and have found them very helpful and keen to resolve issue. I imagine at xmas they face a fairly large influx of calls from a variety of people with differing technical abilities making it harder to resolve issues and taking it longer to get through.. just keep trying, I I also have large format HP printers which are under a support contract with HP and now there is support that is a joke... any time of the year

  • HT1296 my iphone does not sync to itunes, need help

    have a problem. i got a new iphone 5 and now both my iphone and my wife's iphone 4 do not sync to itunes.. they don't come up on itunes when plugged into my computer. in addition, her calendar is lost on her phone. please help

    Hello,
    First thing (may sound trivial) is to check you have the latest version of iTunes installed.
    http://www.apple.com/itunes/download/
    Also, if on a computer running Windows OS, check this article:  http://support.apple.com/kb/TS1567
    Hope this helps.

  • I need help, I have an iphone 4s and I cannot send pictures to other people who does not have iphone, I need help, I have an iphone 4s and I cannot send pictures to other people who does not have iphone

    I do not why I cannot send pictures by MMS or SMS
    to other people and I have activated those functions already.

    Contact your carrier & make sure that MMS is properly provisioned on your account. MMS is a carrier feature, not a phone feature.

  • My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.

    My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.

    A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.

  • TS1474 I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

    I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • TS1363 Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

    Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

    Which OS are you using? 
    In the meantime, research your problem in Knowledge Base. 

Maybe you are looking for