Ipod does not light up when connected to PC.

My ipod used to light up when you touched the clickwheel when it is plugged into my computer, but ever since it showed a folder with a exclamation point (which i fixed) it does not light up when it is touched on the clickwheel anymore. I have restored it a coupple times and my ipod is up to date (1.1.1), does anyone know why it is doing this?

Does anyone know?

Similar Messages

  • Satellite L650-12Z: Led does not light up when connected to power source

    My L650 does not show the white light anymore when the cable is plugged in.
    The connectors are clean, and the adapter is working.
    The laptop does still run on the battery ( when there was still power in it).
    Also without the battery, there is no white light indicating that the laptop is connected to the DC.
    Does anyone know what the problem could be and how to solve it?

    Thanks for your reply.
    Unfortunately the battery does not charge when connected.
    Only when connected with the full battery it is working.
    I have measured the adapter with my multimeter and it seems to be working properly.
    Like you said, letting a technician look at it would be a smart idea.
    I decided to send it to a service center in my city, in about 4 weeks I would have the notebook back they said.
    Weird thing for me still is, that around three weeks ago the same happened. Windows said the power was not connected. But after plugging the power in and out a few times it worked again. Maybe this is a symptom of something?

  • IPod does not show up when connected to USB port; why?

    My grandson has an iPod Shuffle.
    Working with iTunes6, I connected the iPod to the USB port becasuse we wanted to get a print-out of the 75 songs there.
    It did not show up in iTunes listing; why??
    We know the songs are there; they can be played.
    The iPod was identified back in February as "Valentino" on a different computer; I wish I had that machine because "Valentino" showed up on it.
    BTW, I have now up-graded to iTunes7 but the iPod is not here to try it out.

    A whole list!! Such as?
    Besides, after reading the emails about iTunes7, I'm in no hurry to try anything right now.
    I'll wait until iTunes7 gets stable.
    If iTunes7 were to wipe out my ten year old grandson's 75 songs (as apparently it is very capable of doing) from his iPod, Apple can forget about him as a customer for a long, long, long time.

  • ITunes does not start anymore when connecting iphone

    Hello,
    since my latest upgrade of itunes (still under snow leopard) itunes does not start anymore when connecting my iPhone 4 to my Macbook Pro.
    Meanwhile I upgraded to Lion and installed the latest itunes patch but same behavior,
    Does anybody has an idea to solve this issue?
    Thx,
    Hendrik

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • Itunes does not start automaticly when connected although auto is thicked help?

    Itunes does not start automaticly when connected although autostart is thicked can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/message/15693777#15693777
    Cheers,  

  • Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo.  Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

    Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo.  Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

    If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

  • Why does iphone not light up when connected to power ?

    The power lock button on my iphone 5 is broken. I turned it off using assist feature. Now when I connect the phone through cable to the wall charger, it does not light up. I know the battery was about 70% when I turned it off. Any clues ?

    Hi 008635ar,
    If you are having issues with charging your iPhone I would suggest that you troubleshoot using the steps in this article - 
    iPhone and iPod touch: Charging the battery
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • When I had my old blackberry connected to my computer, all incoming emails were routed to my outlook so I did not get mails on my blackberry.  How do I get it so my iphone4 does not receive emails when connected to my computer?

    I am getting my iphone inbox bombarded so would like it to not receive emails when connected to my computer.  My old blackberry had an app that took care of this which worked really well.  Am wondering if I can do the same with my iphone4.

    Blackberries were/are able to do that with some types of e-mail accounts because the mail is routed to an intermediary (BlackBerry Service).
    There is no equivalent for the iPhone as the phone communicates directly with the mail servers and does not go through a 3rd party.

  • I just downloaded latest version of Itunes and now my Ipod does not show up when I connect to Itunes, I just downloaded latest version of Itunes and now my Ipod does not show up when I connect to Itunes

    I recently downloaded the latest version of Itunes.  As soon as that was finalized, my Ipod stopped showing up on the screen when I was in Itunes and I can't sync new songs and audiobooks to it.  How do I get my Ipod to work again?  It charges up and plays just fine, it will not sync or update with Itunes.  There is nothing showing on Itunes that I can manually sync it, either.  That option can't be clicked on.  I have no other devices other than the Ipod that syncs with Itunes now, I used to have an Iphone, but I don't anymore

    Hey melthepest,
    Thanks for the question. I understand that your iPo classic is not displayed in iTunes when connected to your computer. The following articles include troubleshooting steps that may help resolve your issue, depending on the symptoms:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    http://support.apple.com/kb/TS1416
    Thanks,
    Matt M.

  • Ipod does not recognize songs when unplugged from computer

    My iPod shows all of my library songs when it is connected to the computer, and I am certain the files are physically on the iPod, because it can play songs when connected to iTunes that have been deleted from my hard drive (and I can see the actual files in the hidden iPod control folder), but when I unplug the iPod, i have no songs. I tried to reformat, but when the ipod formats, it never finishes, it just says 'waiting for iPod'. Using Windows XP, SP2.

    I just fixed a similar problem with my iPod.
    I didn't have any problems with my restore but I still couldn't see any songs on my iPod. ( Yes, I'm updated to the current firmware and 4.9 iTunes. )
    The solution for me was to assign a letter drive to the iPod file system when it mounted ( i.e. not to let Windows pick one randomly ). If you have mapped network drives, you should consider doing likewise.
    Check this out for more details:
    Strange iPod behaviour when Windows confuses iPod with network drive
    This article was suggested by James Bond 007 in a post entitled "Ipod v 2.3 vs. 2.2 problem with Updater 2005 -06-26".
    You can tell it's got the letter drives confused because it creates an iPod_Control under one of your network drives and starts filling it up instead of your actual iPod ( hence no music when you disconnect ).

  • Focusrite Saffire does not show up when connected to Imac by Firewire 800

    When I connect my focusrite saffire to my i7 imac 27" via the firewire 800 port, the device does not show up on the computer, however it does light up indicating it is being powered off the firewire. When I click on "about this mac<more info<firewire", all I see is this " Maximum Speed: Up to 800 Mb/sec", I have checked and my "AppleFWAudio" file is up to date. The Focusrite uses Firewire 400 but I use an adaptor which converts it to 800, I have tried different adapters and cables from a number of companies which were suggested by Focusrite themselves and none of them worked.
    Any ideas on what the problem could be?

    I too was having problems connecting my Focusrite Saffire to my new iMac 27" i7.  It would light up and click several times, but it would never be in a ready state w/ both LINE indicators being green.  The Saffire Control software would say the the Saffire DSP didn't load and to unplug it and re-plug and wait for the lights to turn green, but that never happened.  I called Sweetwater (where I bought the unit) and they didn't seem to know of any prevailing issues, BUT the tech did suggest to reboot the iMac in 32 bit mode (hold down the '3' and '2' keys during startup).  I did that and replugged the Saffire but it exhibited the same problem.  I unplugged it and left it for like 3 minutes then reattached the firewire cable and it mounted.  I opened up the Sound preferences and was able to select it and get sound out of it.  I then opened DP and ran a quick test and it worked as well.  The next test was to reboot into 64 bit mode.  I did that while the Saffire was still connected and it actually stayed mounted and connected upon reboot.  I have my System Sound output running through it right now and its still working.  I haven't tried DP yet, but will do that later.  I'm not going to reboot again until I hear back from Focusrite.  I sent in a help request last night. 
    Hope this helps someone.

  • Windows 7 computer does not recognize SX50HS when connected by cable

    My computers, both of which run Windows 7, do not recognize the Powershot SX50HS when it is connected via the Canon cable. In other words, even after the cable is connected to the USB port and the camera's power is turned on, the camera does not show up as a device when you go to "Computer" and look at the list of drives, etc. How can I fix this? Thanks.

    If you don't know run the software disk that came with the SX50. It has the correct files that your computer needs in order to communicate with your camera.
    "A skill is developed through constant practice with a passion to improve, not bought."

  • ITunes does not recognize ipad when connected

    When I connect my iPad to the computer, iTunes does not recognize the iPad.  I have had the iPad for several months now and have not had the issue.  I checked the cable with the charger and that works fine.  Went through what Apple suggested to no avail.  Any ideas?

    Did you try the steps contained in the attached link?  http://www.apple.com/support/ipad/assistant/itunes/

  • Computer does not start up when connected to My Book 4TB

    When I connect MY Book (4TB) to my computer before turning it on, my computer does not start up.  I only get a black screen.  If I disconnect the My Book and then first start up my computer, I am able to plug in My Book and read all the files, backup, etc.  Why won't the computer start when My Book is connected???

    ??? Wrong Forum? This is for "My Book Live" vs "My Book"... How to tell? Easy, MBL (NAS) does not have USB, MB (USB HD) does...

  • Backup does not sync automatically when connected to wifi, locked and charging

    i have bought 200G on iCloud to back my iPhone up to iCloud. after ensuring all my setting are correct.... my phone still does not automatically back up to iCloud when connected to wifi, locked and charging. it has been one month now and my iTunes still says that my iPhone has never been backed up, i am still receiving notifications on my phone saying that i have never backed up my phone, i have searched the net for any possible solution and it seems i have all my setting correct but still it doesn't work. any help would be appreciated thanks

    Just to be clear, it will automatically backup to iCloud not iTunes.
    Make sure you have iCloud Backup turned on:
    Settings > iCloud > Backup > turn iCloud Backup on
    If it is already on, it will tell you when it was last backed up under the Back Up Now button

Maybe you are looking for

  • I want to change the iCloud account on my iPad from mine to my wife's

    BUT I get a message saying that if I delete my account it will remove all data from iCloud! Which is not what I want as I want to continue to use my iCloud on my iPhone and remotely. There is no option in settings for changing the iCloud account, so

  • Acrobat Pro XI Extended - Geospatial PDF

    I generate maps using ArcMap 10.3.  This will export to PDF (simple or with layers). However, the layers must be very simplistic and small in file size.  I have clients that don't have the GIS software and are not GIS savvy.  I need a map viewer. I r

  • How to place the print and zoom link  on top of the page in discoverer10g

    I created a table format report and I want to place a Print and zoom link on the top of the page also I want to display the sum of a column in the top of the page, How to go for it. Message was edited by: user575682

  • CX_SY_DYNAMIC_OSQL_SEMANTICS error with dynamic SELECT statement

    Hello Gurus, We have a dynamic SELECT statement in our BW Update Rules where the the Selection Fields are populated at run-time and so are the look-up target and also the WHERE clause. The code basically looks like below:           SELECT (lt_select_

  • Cs3 will not install

    Thanks to Ned Murphy's advice I have been able to download CS3 Design Standard from site. However I have been unable to install the software. I'm installing on MAC and the original software is on the hard drive (transferred from my old and damaged MA