IPod does not show up in itunes or windows

I've been through all relevant troubleshooting pages and I still can't get my 4th Gen ipod to show up on my computer or itunes. I have managed to install a driver, so the device manager recognises there is an ipod fitted.
Is it because I have WIndows Vista? I've checked that its fully upto date.
Please help, its highly frustrating.

I need help with this as well. (Of course, like the others, I have also checked the various support pages and googled the problem to no avail.)
Basically, I want to connect my ipod to my work computer so I can charge it while listening to music. I did not have trouble with it in the past (I was able to connect it without itunes, ipod would charge once plugged in to a usb port - it showed charging "do not disconnect" message; I could also charge it while listening by ejecting it through windows - right clicking the ipod drive listed and selecting eject) and it's connecting to my co-worker's computer just fine! So I think it's a usb problem on my computer but i have no clue as to what to do... >_<
When I got to work today and plugged my ipod into my computer, it mysteriously did not show up under the windows explorer as a drive so I could not eject it as normal to charge and listen. Originally, this morning it did JUST charge (plugged ipod in and "do not disconnect" message appeared), but after I fiddled around and selected to stop device under the device manager it would not connect again. So now it is not even connecting to charge.
I've tried installing itunes, rebooting various times, resetting my ipod, turning it into disk mode, changing it back... - all nothing.
Although...when it changed from disk mode back to regular ipod mode and I plugged it into the usb drive it did charge for a while (as if it was on aka i could play music; it didn't show the "do not disconnect" screen), but when I touched the click wheel it stopped charging!!!
this is very frustrating so any help would be appreciated

Similar Messages

  • My IPOD does not show up in itunes

    when i plug my Ipod into my computer it does not show up in Itunes.   

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • TS1363 my ipod does not show up in Itunes

    my ipod does not show up in Itunes

    iOS: Device not recognized in iTunes for Windows - Support - Apple
    Hope this helps.

  • Help - iPod does not show up in iTunes or as disk in Windows Explorer

    Would someone PLEASE tell me how to get my iPod to show up in iTunes or as disk in Windows Explorer?
    According to our PC XP computers, we do not have an ipod and it won't charge when plugged into USB. It worked fine for 10 months until this morning (10/26/06). We have ruled out bad USB drive by using flash drive on that USB and it worked fine. Reseting ipod does not work (ipod does not respond to reset command hold toggle then hold menu + play for up to 10 sec). Reseting ipod within ipod menu does nothing. ANY suggestions would be GREATLY appreciated!
    Thanks.

    I have the same problem with my brand new 2 GB. I have reloaded software, gone through the "5 R's", tried the ipod on my PC and on my laptop -- neither computer recognizes or charges the ipod. Any info greatly appreciated.

  • My classical iPod does not shows in my itunes

    iIt does not show in itunes so I cant reset it

    You dont need iTunes to Reset your iPod, just do the following.
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    However, if you mean Restoring your iPod, it is another matter, which you need iTunes and some troubleshooting to find out why you cant connect to iTunes.

  • Old ipod does not show up in Itunes after new ipod was connected

    I have an ipod nano 2g and it was working alright with itunes, however bought a new ipod 4g for a mate and updated the ipod from my itunes now my ipod is not being recognised by itunes, its still reading it as my friends ipod and i cannot update
    amd athlon xp   Windows XP  

    Welcome to Apple Discussions.
    Did you use the same name for both iPods?

  • Ipod does not show up in itunes

    my ipod recently stoped showing up in my itunes, it still charges but other than that its like its not plugged in.
    This is extremley fustrating because now i can't add new songs, has anyone had this problem before and if so could you tell me how to fix it?

    hi Kulbow!
    let's check on these issues first:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod appears in Windows Explorer but does not appear in iTunes
    love, b

  • My ipod does not show up on itunes.  Like it is not plugged in.  It has a good connection.  I have tried all the trouble shooting steps.  Uninstalling all apple itunes, bonjour, quick time, etc. and still shows no device!

    The ipod icon does not appear on itunes. I followed all the troubleshooting  help.  Uninstalling all programs related to ituens and itunes.  veryifying uninstall restarting  computer, installing again.  I bought this ipod at a thrift store.  BUT IT WAS BRAND NEW in the package, never opened. checking serial number on apple they want a fee of 19.00 to give me help!  I paid 40 for the ipod so not worth it.  but if anyone has an idea for how I can get this to work.  Pleaseeeee

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this and see if the results help
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if you have an iPod or computer problem
    You do have the latest iTunes, version 11 on the computer, right?

  • IPod does not show up in iTunes or My Computer when its plugged in

    I've tried several iPods (all 5th gen 30gig) on my system. The first one I tried worked fine (but sadly wasn't mine!), but none of the others tried since have ever worked, even though they work on other systems.
    The problem is that when I plug the iPod in neither iTunes nor My Computer sees the iPod. The PC knows it's there because the iPod shows up under "Other Devices" in Device Manager. (On a system where the iPod is working properly it shows up as a Disk Drive in Device Manager, by the way.)
    I've tried all the fixes on the Apple support site, working my way through the relevant piece (61711) on the Apple knowledge base. I've also upgraded to iTunes 7 and read the new stuff on similar problems encountered by some people upgrading and tried the fix just posted on the front page of the Apple support site but it didn't work (I got this problem long before upgrading to v7, so I guess it wasn't aimed at my issue.)
    Any ideas?
    Oh and I ran the iTunes diagnostics tool and it generated all this stuff below, which might be relevant - who knows?
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dimension 5000
    iTunes 7.0.0.70
    iPodService 7.0.0.70 is currently running.
    iTunesHelper 7.0.0.70 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskMaxtor6Y160M0_________________________YAR51HW0
    Could not get bus type for CD, 50. Problem with installation of drive in Windows.
    , Bus Address [0,0]
    Universal Serial Bus Controllers:
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2658, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A, PCI bus 0, device 29, function 2. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B, PCI bus 0, device 29, function 3. Device is working properly.
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C, PCI bus 0, device 29, function 7. Device is working properly.
    No IEEE 1394 Host Controller found.

    I've tried several iPods (all 5th gen 30gig) on my system. The first one I tried worked fine (but sadly wasn't mine!), but none of the others tried since have ever worked, even though they work on other systems.
    The problem is that when I plug the iPod in neither iTunes nor My Computer sees the iPod. The PC knows it's there because the iPod shows up under "Other Devices" in Device Manager. (On a system where the iPod is working properly it shows up as a Disk Drive in Device Manager, by the way.)
    I've tried all the fixes on the Apple support site, working my way through the relevant piece (61711) on the Apple knowledge base. I've also upgraded to iTunes 7 and read the new stuff on similar problems encountered by some people upgrading and tried the fix just posted on the front page of the Apple support site but it didn't work (I got this problem long before upgrading to v7, so I guess it wasn't aimed at my issue.)
    Any ideas?
    Oh and I ran the iTunes diagnostics tool and it generated all this stuff below, which might be relevant - who knows?
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Inc. Dimension 5000
    iTunes 7.0.0.70
    iPodService 7.0.0.70 is currently running.
    iTunesHelper 7.0.0.70 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskMaxtor6Y160M0_________________________YAR51HW0
    Could not get bus type for CD, 50. Problem with installation of drive in Windows.
    , Bus Address [0,0]
    Universal Serial Bus Controllers:
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2658, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A, PCI bus 0, device 29, function 2. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B, PCI bus 0, device 29, function 3. Device is working properly.
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C, PCI bus 0, device 29, function 7. Device is working properly.
    No IEEE 1394 Host Controller found.

  • Older iPod does not show up in iTunes in OSX 10.9.5

    I have an old iPod. The thin bright green with a one color screen, and the white circle dial on the front. I can't seem to get it fully charged or to show in iTunes. When I plug it in, a very faint white apple shows on the iPod screen. I tried connecting to iTunes and it is not recognized. Any suggestions, or is the iPod just too old?

    Hi there debdesigner,
    You may find the troubleshooting steps in the article below helpful when dealing with an iPod that isn't being recognized.
    iOS: Device not recognized in iTunes for OS X
    -Griff W.  

  • 5th generation ipod does not show up on itunes

    I have tried reinstalling itunes and the ipod hardware many times but there is still the same problem. The ipod showed up once before but since that time itunes has not recognized the ipod as being connected to the computer. Is there something wrong with my usb port??

    I have bumped into this problem as well, check the following things:
    - Do you have a USB 2.0?
    - Is there any device conflicting with the drive which is designed to iPod? For instance, I had my iPod ben put under C:\. Apparently iTunes thought that was my harddisk. In Control Panel> Computer Management you can change the name of your drivers. Call iPod M:\ or something.
    Doesn't this work? Apple has a Troubleshooter on its website called "iPod recognised in Windows, not recognised in iTunes" or something like that (easy to find). Good luck!

  • Itunes freezes when connecting and ipod does not show up

    When I connect my nano 3rd gen in windows vista using itunes 9 my ipod does not show up and itunes freezes. the ipod remains with the connected screen and I cannot close out of itunes. Any help would be wonderful... Thanks!!

    I have (finally)solved the problem with my iTunes freezing! Here's what I did:
    1.I backed up my entire music library to an external hard drive.
    2.Then I completely uninstalled iTunes 9 from my computer.
    3.After a re-boot I then completely deleted my entire music library. (this can be a little scary so I double checked my music library back up on the external drive)
    4.I Googled iTunes 8 and found it at
    http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/
    5. I downloaded it but before I installed it I copied my music library back to my computer. I did not copy everything that was in my original iTunes music folder however, I only copied the music,album art work, applications,games,Tv shoes, and podcasts folders. I placed those folders in a new folder called iTunes on my computer. I did not include any of the iTunes database files eg: .itl / .xml / or .itdb files as these were created in iTunes 9.
    6. Now I opened iTunes 8.2 and added all of my music and other media content.
    7. Next I attached my iPod nano to my computer. Then Windows automaticly open a window asking me if I wanted to scan for problems or continue without scanning. I had windows scan for problems and once that was done my iPod nano began to sync. Oh what joy!
    I think, and this is only a guess based on what I've read here on Apple's discussion pages and my own experience, that there is a problem/conflict or bug with iTunes 9, Windows Vista and the 3rd -4th generation iPod. I will NOT be upgrading to iTunes 9 until Apple has addressed this issue. It seems to me that there are a lot of people having similar issues.

  • 80 GB Ipod Classic does not show up in itunes or Win Vista Machine

    Hi, I recently updated my itunes software with ver.8 and since then my 80 GB Classic ipod does not show up in itunes or in my computer. Hence, I am not able to sync my itunes. When I connect my ipod it just shows "Connected - Eject before disconnecting" and just freezes there. Pls help?

    Hi. When I connect my ipod to any microsoft device, sometimes my ipod doesnt connect. I cant charge it, or restore it as it behaves like a useless piece of plastic.. I get a yellow bubble 'Device not recognized or has malfunctioned'
    This problem is bizarre! I cannot find anyone who actually has a solution for this problem! Apples standard answer is for me to reinstall my drivers or update itunes or windows. Done it. No solution yet.
    My ipod works fine.... sometimes. Its a completely unpredictable problem. Ive googled this problem and so many ipod classic owners have asked.. solutions ive tried: the 5r's, updating drivers, It managed to connect once, but now it wont. My ipod normally works fine on my PC, XBOX, laptop and Mac.. but sometimes, unpredictably, it wont be recognized by anything apart from the mac. For a month it would not connect at all and I took it in to an Apple store where they told me it works fine. Its not my PC.. its up to date, and theres no reason why it doesnt work on my XBOX because some times it does.. last night it did, today its broken again, I suspect tomorrow it may work. This is SO frustrating!!
    I have alot of experience in PC's and normally I can solve a problem by process of elimination, updating and reinstalling, but in this case.. everything seems fine. My only idea is that maybe its my Sync cable?? Which also makes no sense because it generally connects fine on the mac - and, why would a sync cable be unpredictable.. surely it either works or it doesnt. HELP PLEASE!!
    Nick.
    my email is: [email protected]
    my serial for my 80g classic is 8K819CPKYMV and is under warranty until May 2009, i bought it in August this year.

  • HT1459 Just bought a new ipod shuffle for my kid and cannot set it up because it does not show up in itunes. Also the charging light does not light up. what could be wrong, as i am able to see both my iphone and ipad on itunes on the same pc?

    Just bought a new 4th gen iPod Shuffle for my kid. Problem is I cannot do the initial set up, as the device does not show up on iTunes on my PC. Also the charging does not light up. Any ideas on what could be wrong, as I am able to see both my iphone and iPad on iTunes using the same PC?

    I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.

  • My iPod Touch 3rd Gen, Does not show up on iTunes Devises  4.3

    My iPod Touch, 3rd gen, does not show up on iTunes 10. I feel I have exhausted al avenues. Diagnotics passed all tests but - The Connection Not Found. Continued on with there Help suggestions with no success.

    Which version of iTunes are you using?
    Stedman

Maybe you are looking for

  • Is there any way to deactivate a device from the Verizon website?

    I'm trying to deactivate a phone we don't use anymore, and I'm wondering if I can do that anywhere on the Verizon Wireless website? I've found the "suspend services" tab, but I want to permanently deactivate the phone. I'm just trying to save myself

  • Problem in update with DB Adapter

    Hi, I have a Table with one attribute(Primary key). I want to update that table by replacing the existing value(Overriding). Developed one BPEL process by configuring db adapter with operation as insert or update and I checked by executing the BPEL p

  • How to find the date difference in query level?

    Hi All,   I have to find the difference between Delivery Date and Posting Date in the query level. Canyou please let me know whether it is possible or not? Thanks in advance!! Regards, Ramanathan.R

  • Alignment problem in a graph when build

    I would really appreciate your help. I am turning around trying to align a legend of a graph. My application is coded in Labview 2014 in Windows 7. Before it was in XP and older LabVIEW and I had no problem. I have a user interface with a graph. I ma

  • Java5 printf and java.util.UnknownFormatConversionException: Conversion = '

    As a long time C/C++ programmer I was pleased to see printf added to Java5, however one of (IMO) the most useful features - using an asterisk in the format string to indicate a fields width modifier is to be taken from the varargs list doesn't appear