IPod doesn't work after mac connection

i don't know why my mini ipod doesn't work anymore (it doesn't read the songs!) after i connected it with an imac g3. i started my ipod with a pc... and transfered a program for mac with it... then i connected it with the mac and now it doesn't read the mp3... suggestions?

Try to do a Reset and a Restore, bear in mind please make sure that you have all the music with your iTunes on your computer, as doing a Restore will erase all the data in your iPod

Similar Messages

Windows iPod doesn't work on Mac after iTunes 5 update

Hi. I have a windows formatted 2nd (touch wheel) generation 10gig iPod. I also have an iBook G4. The windows iPod always worked on my Mac until I updated from iTunes 4.9 to iTunes 5. I have the latest iTunes software, but now I can't put songs on my iPod. (I use automatic update.) What's more, whenever I plug in my iPod, my iBook deletes some of my songs from the iPod, and says that the iPod software needs to be updated. When I tried to update it, it said that the iBook couldn't do it because it's a Windows-formatted iPod. It's all a mess. Can anyone help?

Are you trying to switch to mac or to use two different computers?
There are a lot of threads dealing with using an iPod on both PCs and Macs at the same time. I believe there is a problem if you try to do automatic uploads from iTunes from both computers, but check the discussions specific to that.
If you are switching, your life would be easier if you reformatted the iPod to HFS+ (mac format)

IPod doesn't work after 1 year - costs $250 to fix????!?!

My wife got me this ipod for graduation last year. I am just a couple months outside the 'warranty' and it doesn't work. The thing cost like $400 at the time.. and it will cost almost $300 to look at fixing.
This is extremely disappointing. I thought apple made better quality products before this experience. I had to send it back twice because of the battery charge problem and now it just doens't work period.

http://www.notpopular.com/blog/comments.php?blogID=63
tip: google can actually be useful!

Ipod doesn't work after firmware update

I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
Now i'm trying to recover it again but my computer doesn't recognize it.
¿Is there anything I can do?
Thanks in advance.
Jse

The best place to look for help first is Genuine Apple help directly from Apple.
Read the iPod Touch Users Guide.
http://support.apple.com/manuals/#ipodtouch
Also start with the basics from Apple.
1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
And More..........

Ipod doesn't work after updating software!!!!!!!

I've just updated my ipod nano's software and it stopped working. The itunes works alright, it updates the songs and everything but the ipod itself has no image whatsoever! How can I solve this?

Try resetting the ipod to see if you can get a response from it.
http://docs.info.apple.com/article.html?artnum=61705
If you can get it to come up to an apple logo, but no further. Try putting it into disk mode. Then restore the ipod.
http://docs.info.apple.com/article.html?artnum=93651
http://docs.info.apple.com/article.html?artnum=60983
If you cannot get a response from the ipod and it does not charge or respond to the computer, then the ipod needs to be serviced. you can set the ipod up for service via the ipod service request form on the apple website.
http://depot.info.apple.com/ipod

IPod doesn't work after updating...??

Hi everyone,
Anyone who can help me with this - please do! It would be much appreciated!
I run WinXP Pro on my Asus M6A laptop. Recently, I started iTunes and it said there was an update available. I updated iTunes. When I restarted iTunes it told me there was an update available for my iPod. I accepted that and let my iPod get updated.
Now, it's screwed.
Essentially, it spends almost all of its time frozen, not responding to any inputs on the click wheel or on any of the other buttons - not even the hold button. What is displayed on screen just remains, frozen there.
The one exception is the reset - I can reset it. Then, until I plug it into the computer, it appears to function. When I plug it in it will appear in the updated version of iTunes fine, but will stop responding (although iTunes appears to copy across updated data, e.g. if I change the title of a song?).
I tried the 5R's. None of them worked. When I tried restoring it it just crashed about two bars into the process, bringing my entire laptop down with it.
I tried using the old Apple iPod updater, but this exits straight away with an "Invalid iPod service version" error message.
If anyone has any ideas on how to fix this please let me know! I've tried everything I can think of, and basically none of it has worked. Thanks!
Christo
ASUS M6A Laptop Windows XP Pro

Mine is exactly the same, worked for almost 9months then started giving me trouble! I am tired of resetting it, restoring it to factory setting and formatting it! My hold button is also broken, my fast forward button is not clicking anymore, suspect its because i use it alot but thats no excuse for apple. Anyone know what there return policies are if u still have a warrenty or know how to fix the proubles so many of us are having with our 5th gen ipods?? HELP PLEASE!!!

Ipod doesn't work on mac

My ipod shuffle says I need to restore my ipod, but i can't, because I need the adminnistrator's name and password, but I can't get it from him, because were not supposed to download music. Can I get some help?

Sorry, Julian, but there's no way around that problem that I know of. It looks like you'll have to restore your iPod on your own system.

Why HP Laserjet P2055dn doesn't works after Mac OS upgrade to OS X 10.9 Mavericks?

I upgraded my Mac OS to OS X 10.9 Mavericks, and now my printer HP Laserjet P2055dn will not print correctly. The data arrives the printer, but the print is not readable. Where can I download updated drivers from HP for this model? Or fix this problem?
Thanks,
Anderson Camillo

It says in this document that the Fax driver (HP LaserJet M1530 MFP Series. Fax) is available:
OS X: Printer and scanner software available for download
Try resetting the Printing system, which forces OS X to re-find available drivers, both on Apple servers and already installed:
OS X Mavericks: Reset the printing system
I don't have that printer, but it looks like you have to add ( + ) it twice (one for fax) in Print & Scan prefs.

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

Hi,
After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
Does anyone have similar experience. Anyway to fix it?
Thanks,
Henrik

Have done some further investigating (to no avail). The TV is displaying in my system Info as follows:
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type: GPU
Bus: Built-In
VRAM (Total): 384 MB
Vendor: Intel (0x8086)
Device ID: 0x0116
Revision ID: 0x0009
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
TOSHIBA-TV:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
But nothing on the screen.
Does anyone know if Apple have banned certain screens????

Both Chrome and Safari interrupt online streaming to request/demand an update for a PC program that doesn't work on Macs. What is going on?

Both Chrome and Safari interrupt online streaming to request/demand an update for a PC program that doesn't work on Macs. What is going on?

The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions.

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

My iPhoto doesn't work after installing lion?

My Iphoto doesn't work after installing lion.
it suggest that I have to instal iphoto again.
where can I find this

If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

IPod doesn't work after mac connection

Similar Messages

Maybe you are looking for