IPOD doesn't work on WIN XP

Ipod shuffle stinks, spent 2 days trying to fix and nothing works! This is why I am still going to stick with PCs and not MACS!
PC Specs:
3.2 GHZ INTEL Dual Processor with HT
7800GT NVIDIA
2 GB RAM
500 GB HD Space
WIN XP SP2

Did you try reinstalling itunes and resetting the shuffle? If the shuffle is still having problems stop by and Apple store and they can help you out.

Similar Messages

Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

hi , please tell me why my ipod doesn't work ... when i conect it to my pc nothing happen .. and i can turn on my ipod .. why ? please help me

Go to
http://bt.custhelp.com/app/answers/detail/a_id/47531
and follow the instructions
This was put up by BT several months ago as part of the advance notification that the Yahoo service through them was closing

IPod doesn't work after mac connection

i don't know why my mini ipod doesn't work anymore (it doesn't read the songs!) after i connected it with an imac g3. i started my ipod with a pc... and transfered a program for mac with it... then i connected it with the mac and now it doesn't read the mp3... suggestions?

Try to do a Reset and a Restore, bear in mind please make sure that you have all the music with your iTunes on your computer, as doing a Restore will erase all the data in your iPod

I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen. Now the ipod doesn't work at all. Any suggestions?

I made a mistake of trying to put 5.0.1 beta 1 firmware on my ipod touch 3rd gen ( non-registered) unsuccessfully. Now the ipod doesn't work at all with any public firmware. Any suggestions?

You can try putting the iPod into Recovery Mode and restoring it:
http://support.apple.com/kb/ht1808
If that doesn't work, you'll need to take this up in the forums to which you have access as a member of Apple's iOS developer program.
Regards.

TS1363 ipod classic not working with win xp not sure how to sync it?

ipod classic not working with win xp not sure how to sync it?

Have you read this?
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
Switch 101: Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518

TS1398 The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade."

My live! platinum doesn't work on win

My sound blaster li've! II platinum doesn't work on win xp! I have tried to download drivers and install them but it's still impossible to listen to my external midi keyboard. Creative Playcenter, recorder, launcher and surround mixer are impossible to initialize....a message tell me that there's an error or that it's impossible to find drivers. I've tried to re-install everything and then install new drivers for xp but...nothing!!!
How can I solve these problems? I want again complete funcionality of my audio card!
Thanks to everyone will give me an answer...
Bob

iOS: Troubleshooting applications purchased from the App Store
You may want to try deleting the app and download it again. Read the troubleshooting steps.

My Ipod doesn't work ... I have just the apple light on and off

My Ipod doesn't work ... I have just the apple light on and off
can you help me please

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Help! I deleted a folder, and now my iPod doesn't work!

Being the new owner of an iPod, I was unaware that I was required to use iTunes to manage data. Instead, I browsed the iPod's files using Windows Explorer and manually deleted a folder of pictures. Now my iPod no longer works; it displays a link to the Apple support site. My computer no longer recognizes the iPod (once it is connected, it displays the removable drive in My Computer, but doesn't show up in iTunes. iPod Updater freezes when the iPod is connected.), so I cannot restore it. Please help!
PC Windows XP Pro

had the same problem aswell mate, dont worry its not too complicated
1st step is to get ur ipod into disk mode and open my computer. once here right click on removable disk and select format. if this works that means ur computer is atleast responding to your ipod and the problem should be over and done with.
if that doesnt work goto step 2
step 2 is, when you turn your ipod on does it make any sounds??? if it makes some beeps and little sounds you have a problem with your hard disk in the ipod. not to worry if your ipods new its under warranty and you can send it back.
step3 is to call apple on 1-800-275-2273 between 9 am and 9pm. follow the prompts and talk to a consultant.
the same thing happened to me, so everything above is what i was told from an ipod consultant. good luck and dont stress.

IPod doesn't work need help

I have been trying to get my ipod to work by following the online troubleshooting guide but it doesn't help.
my ipod doesn't start properly it shows that file icon wioth the caution symbol, and sometimes shows a battery icon with that same symbol, when it connects it stays connected for a few secondsthen it restarts a there is a clicking sound coming from the ipod.
please help

Hello,
If you are getting the "sad iPod" and the iPod's hard drive clicking, these are both indicators that your iPod's hard drive is probably out of place. Before you go to Apple about this, try this and see if it solves the problem for you:
To get your iPod's hard drive back into its correct place, use you hand to tap it firmly on both sides several times, or until if you hear the hard drive stop the clicking.
This isn't a joke, because an Apple employee instructed someone to do this, and it has worked for many people ever since!
Also, have you seen these two helpful links yet?
iPod displays a folder icon with an exclamation point
Exclamation point and folder (post)
I hope this helps! Post back it your problem is solved or not..
~~Kylene

Remote Control Doesn't Work in Win-7 !!!

After upgrade operating system to win-7 Remote Control Stop Working !!
and the ENE CIR Already installed ...
but it's still Don't Work
My Remote Details : RC1762302/00
3139 228 50021
Hp SPS :435743-001
HP:HSTNN-PRO7
RC6 IR
cp04 30801 j 064454 REVB
and this pic 4 it http://img44.imageshack.us/img44/971/846610569l.jpg

I too have this exact same issue. The play, stop, forward, reverse buttons don't do anything, and also the sound buttons, they activate the volume window but not adjustment of the volume happens. The only buttons that work are the opening of applications and the power button. All this happened after I installed some free updating software for some other paid and free applications I have (Advanced SystemCare Professional), all quite legitiment, as a result there were corrupt icons and I had to uninstall the offending software and some corrupted software including Microsoft Office beta and reinstall... no viruses were found on a full Zonealarm scan. I have the DV6-2113TX on Win-7. If ANYONE has a clue how to fix the full functionality of the remote, please let me know as it's really niggling me that it just doesn't work even after reinstalling the drivers for the IR etc.
I tried contacting HP online and I get NO replies. I am yet to phone. It is still under warranty with 20 months left (8 months manufacturer, 12 months supplier).
cheers
Jasen

Radio in IPod doesn't work anymore?

I bought a radio remote which I have been always using in my IPod until one day it doesn't work with my ipod anymore.
The radio option is not visible in the menu. What's weird however, is that the remote still works - I can navigate through my songs list, turn up/down the volume and when I connect the earphones on the jack, I can still hear music. I've tried connecting the remote to other ipods and it works.
Is there anyway I could have this fixed without changing the whole board?

You have to use the ipod Software Updater to restore your ipod. if you're using itunes 7 (or 7.0.1) then you can simply restore the ipod from the iPod Summary Screen. if your ipod is not showing up in itunes or you're using an older version of itunes then you should download the iPod Software Updater from: http://www.apple.com/support/downloads/ipodupdater20060628forwindows.html
Then connect your ipod to your computer and open the Software Updater and click Restore. Hope this helps.

IPod doesn't work after 1 year - costs $250 to fix????!?!

My wife got me this ipod for graduation last year. I am just a couple months outside the 'warranty' and it doesn't work. The thing cost like $400 at the time.. and it will cost almost $300 to look at fixing.
This is extremely disappointing. I thought apple made better quality products before this experience. I had to send it back twice because of the battery charge problem and now it just doens't work period.

http://www.notpopular.com/blog/comments.php?blogID=63
tip: google can actually be useful!

IPod doesn't work

I paid and downloaded the 2.0 update, but when I try to install it makes it to backing up iPod then I get error 1602 and it cancels. My iPod touch becomes unuseable all it shows is the connect to itunes symbol, but itunes can't find my ipod and it doesn't work. I paid $10 for the update and I'm sitting here with an unupdated iPod that can't do anything.
Anyone else have this problem or knows how to fix it?

I HAVE THE SAME PROBLEM. I HAVE NO IDEA WHAT TO DO. I have tried resetting my iPod, restarting the computer, redownloading iTunes, charging my iPod. I dont know what to do. It wont show up on my computer either.
Made an appointment for the apple store tomorrow.
but if someone could help me on here it would be greatly appreciated.
thanks!

IPOD doesn't work on WIN XP

Similar Messages

Maybe you are looking for