IPod dose not turn on

I woke up and get on my iPod that was charging all night and it works fine. I go and play on my mac then go to my room and my iPod dose not turn on when i push power or home so then i held down the button nothing happened. I plug it in to my mac nothing happens on the mac or iPod it has been like this for a day! help!

Try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable                     
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar              

Similar Messages

  • My iPod LCD is aport my screem the people that replace the screem did not turn the screem off and it dose not turn on

    My iPod LCD is aport my screem the people that replace the screem did not turn the screem off and it dose not turn on

    Sorry to hear that.
    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57

  • My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?

    My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?
    Model iPod 2 Touch, 8G, It stoped working less than a month after it was purchased but I never sent it back for repairs or warranty to Apple.. Is there still a way to repair it on my own. It just simply does not turn on or charge and it is not recognized by iTunes when I plug it in to my MacBook Pro.
    Please advise...

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
    Apple Retail Store - Genius Bar              

  • My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

    IS MY IPOD DEAD?!?!?!?!?
    I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
    iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
    warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
    to charge it as well as connecting it to itunes but no success. Could you please help?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPod will not turn BACK ON!  Cold weather?

    My iPod will not turn back on. I left it in a cold car for a few days while I was at my family's house, and the battery must have died while I was there. I came home and plugged it in, but it wouldn't charge or turn on. Help!!

    Try sending it to the itunes store because when i left my ipod in a car for a few days it worked fine. if you haven't tried the 5 rs try those first.
    To reset your iPod nano (2nd generation):
    Reset
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    Retry
    Retry your iPod with a different USB or FireWire port on your computer (please note that the latest iPods can only be synced through USB).
    Restart
    Restart your computer, and make sure that you have the latest software updates installed.
    Reinstall
    To reinstall your iPod nano (2nd generation):
    To update and reinstall your iPod software, first download the latest iTunes software.
    Next, open the new version of iTunes and connect your iPod to your computer. iTunes will then automatically check to see if your iPod needs to be updated and perform the update for you.
    To then check the software version on your iPod, select it from the source list in iTunes. iTunes will display the information about your iPod.
    Restore
    To restore your iPod nano (2nd generation):
    Warning: Because Restore erases all of the songs and files on iPod, make sure to back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library. If you use the Nike + iPod Sport Kit, see this document for more information.
    How to restore your iPod:
    Make sure you've reinstalled the latest version of iTunes.
    Open iTunes, and then connect your iPod to your computer.
    After a few moments, it will appear in the Source list in iTunes.
    Select your iPod in the Source list and you will see information about it appear in the Settings tab of the main iTunes windows.
    Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
    Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
    Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
    A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
    During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
    After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
    Mac Book   Mac OS X (10.4.8)  

  • So i cant download itunes cuz of some patenting control on the computer and  i needed to restore it . so went on icloud (find my phone,ipod etc) and restored it and my ipod is not turning on but ist is still buffering from the past 10 mins

    so i cant download itunes cuz of some patenting control on the computer and  i needed to restore it . so went on icloud (find my phone,ipod etc) and restored it and my ipod is not turning on but ist is still buffering from the past 10 mins

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • TS1363 My ipod will not turn on at all.  When I connect it to the laptop by the USB, it does not recognize it at all.  What could possibly be the problem?  The Nano was working like 30 minutes ago.

    About 30 minutes ago, I was adding some music to the ipod Nano.  Everything was working fine.  Now, the ipod will not turn on at all.  When I connect it to the laptop with the USB, the computer does not even recognize it.  The screen has a fant image of the plug on it and it says connected.  I followed the procedures for disconnecting it when I was finished with it earlier.  Any idea what is going on here???
    Thanks

    It probably needs to be reset. The procedure is different for different Nano models: http://www.apple.com/support/ipodnano/assistant/itunes/

  • HT201412 Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

    Hi , my Ipod touch4 not turning on even not connecting to computer... How can i fix this problem !!!! plz

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • My ipod in not turning on,screen is blank

    My ipod in not turning on and
    not recognized in computer,
    screen is blan

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod dose not open when I connect it to my laptop so I can not transfer any data to my laptop the ipod comes on with itunes so I can transfer data to the ipod can anyone help, I have re installed itunes

    my ipod dose not open when I connect it to my laptop so I can not transfer any data to my laptop the ipod dose come on with itunes so I can transfer data to my ipod I have re installed itunes can any one help please, when I first got the ipod it did work ok

    Try:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Ipod will not turn on, itunes will not open, window says ipod is in recovery mode and needsto be restored

    ipod will not turn on, itunes will not open, window pops up says ipod is in recovery mode and needs to be restored. what do i do now?

    You restore the iPod via iTunes. Don't plug the iPod in. Open up iTunes and then plug it in and then try restoring, if it fails to restore a few times, keep trying. I do it on a daily basis, you're using an Apple product, remember...
    EDIT: Do it from another computer if all else fails.

  • My ipod wil not turn on

    My ipod will not turn on. What do I do?   

    Is the battery charged...?
    Try a Reset...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 15 - 20 Seconds...
    Release the Buttons...
    Turn the iPod On...
    Also, See Here
    Frozen or unresponsive iPod touch
    From Here
    http://www.apple.com/support/ipodtouch/basics/

  • TS2771 ipod touch not turning on, apple icon flashes only

    ipod touch not turning on, apple icon flashes only

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Is there any way to find my lost/stolen ipod if find my ipod is not turned on?

    is there any way to find my lost/stolen ipod if find my ipod is not turned on?

    Only the old fashioned way
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                                                
    Reporting a lost or stolen Apple product                                        
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Maybe you are looking for

  • NOKIA 2730c - Security Level

    I've just bought this phone. I've never used a Nokia, and so I am not familiar with the interface. I've had a play around though and have figured out most of it. Regarding security, I have done the following: - Reset PIN and phone now asks for it at

  • DML and collections

    Hi, How can modify a PL/SQL Table, Nested Table or VArray (using DML) that is not stored in the Database? Example: accept a collection as a "In Out parameter" in a function and manipulate this collection using DML. Anybody have a full example to solv

  • Running the same VI twice

    I am trying to run to same main VI twice simultaneously. I do not want the two main VIs to share information. They need to run totally independantly. I have copied the original VI and all SubVIs to a new directory, but when I load the second main VI

  • Multiple Class Type for Material Master

    Hello Everyone, I would like to ask where in configuration can I setup Classification so that for each Material Master it can have Multiple Class Type. (such as 001 - Material Class, 023 - Batch, 300 - Variants).  Because currently I can only see 023

  • Output jpegs from Wordpress MySQL to Flash

    Does anyone have any idea how to go about outputting jpgs in a Wordpress MySQL database to display as Flash on a template? Thanks... - D