Ipod dumps entire content and must be restored and synced each time.

Second Generation iPod Nano. iTunes on Dell XPS410, Windows Vista.
Battery depleted. Plugged Nano into computer. Got a "may be corrupted screen; try restoring"♦Computer recognizes Nano; I restore and screen confirms successful restoration and tells me to sync. Sync takes place and completes successfully however my Library for the Nano device shows in "graytone" and cannot be accessed. I eject the Nano; unplug it from the computer and it works fine. Once I again plug it into the computer, everything dumps out of the Nano and I have to start the Restore/Sync process all over again. Each time the Nano is unplugged and replugged to the computer iTunes it dumps its entire content!
Would most appreciate any suggestions!

I have tried connecting the ipod via the front and back USb 2.0 jacks on my desktop. I have only one external drive connected to the computer. Doesn't matter whether I remove it or not, the same problem occurs. I do not have a network. My drive letter for the ipod is letter z so it is not disk recognition which is a problem. 1/3 of my music comes from I-tunes, the rest I rip from my Cd's (like Linkin Park, Slipknot, Dir en grey). I only used about 650 MB worth of the ipods 30 gig drive capacity. Doesn't matter which version of the itunes software I use, it gives me the same problem. The recovery loop occured after just after 2 weeks of purchasing it from the apple storeand I took it back with only 12 songs in it. The restored it and 10 days later, the same problem occured. Recently, the ipod has been entering the recovery mode much more frequently prompting me to believe the hard drive is malfunctioning.
I have scanned my computer and the Ipod with everything from Norton, AVG, McCafee, and trendmicro and found no viruses, bugs, worms, etc.
Any suggestions to help me resolve this issue would be greatly appreciated.
Thanks,
Ice

Similar Messages

  • I have an old ipod (5th gen) and I downloaded itunes to my toshiba computer. It says my ipod was formatted by mcintosh and must be restored before i can use on windows. is there a way to transfer my music? ty

    I have an old ipod (5th gen) and I downloaded itunes to my toshiba computer. It says my ipod was formatted by mcintosh and must be restored before i can use on windows. is there a way to transfer my music? ty

    Not without installing additional software on your computer.  The problem is that your Windows PC cannot read the Mac's disk format.  If the iPod was previously used on a Mac, its storage uses the Mac's disk format.  The Restore process reformats the iPod's disk for use with Windows, but this erases its current content.
    There are third-party products that allow Windows to read the Mac's disk format.  For example
    http://www.mediafour.com/products/macdrive
    However, even if your computer is able to read the Mac's disk format, iTunes cannot be used to transfer song files from iPod to computer (except for songs purchased from the iTunes Store).  But there are third-party methods and utilities that can transfer from iPod to computer.  If you do an Internet search on something like "ipod transfer," you should get some links.
    So, you may be able to do it by first making the iPod's disk readable on a Windows PC, and then using a method (that is not iTunes) to transfer its song files to your computer's drive.  After the song files are on your computer, you can add them to the iTunes library.

  • Ipod Stuck in recovery mode loop and must be restored every 2 days

    Hi everyone,
    I have a Fifth Generation Ipod Video 30 Gig that I purchased from an Apple store sometime in july and it has given me nothing but problems. 3 weeks into using it, the ipod tells me that it is in recovery mode and must be restored. I restore it and it continues to give the same message until I finally disconnect it and wait a good 20 minutes before it finally allows me to activate it. A week later, the Ipod needs to be restored again and the same incident occurs. I have changed the drive letter 13 times (currently on letter Z), used every version of itunes (old and new), changed the type of files I upload, etc. but nothing works. The worst part is that after restoring it, the Ipod works for a few days before it relapses again. Worst of all, I use it for less than an hour a day.
    I even went to the Apple store after i restored it and the "genius technician" synced my ipod and said there was nothing wrong with the Ipod. I have seen many people in the forums cite hard drive failure as the cause of this problem but I cannot convince the "genius technicians" at the Apple store that this is the problem.
    Please help me resolve this frustrated, unwarranted, and expensive problem!!! Your help is most appreciated.
    Thank you,
    Ice

    I have tried connecting the ipod via the front and back USb 2.0 jacks on my desktop. I have only one external drive connected to the computer. Doesn't matter whether I remove it or not, the same problem occurs. I do not have a network. My drive letter for the ipod is letter z so it is not disk recognition which is a problem. 1/3 of my music comes from I-tunes, the rest I rip from my Cd's (like Linkin Park, Slipknot, Dir en grey). I only used about 650 MB worth of the ipods 30 gig drive capacity. Doesn't matter which version of the itunes software I use, it gives me the same problem. The recovery loop occured after just after 2 weeks of purchasing it from the apple storeand I took it back with only 12 songs in it. The restored it and 10 days later, the same problem occured. Recently, the ipod has been entering the recovery mode much more frequently prompting me to believe the hard drive is malfunctioning.
    I have scanned my computer and the Ipod with everything from Norton, AVG, McCafee, and trendmicro and found no viruses, bugs, worms, etc.
    Any suggestions to help me resolve this issue would be greatly appreciated.
    Thanks,
    Ice

  • HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

    My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.  I have the latest version of iTunes.  Windows has all the most recent updates too.  I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

    Already tried another USB port, still nothing.
    I don't have another PC to check, I only have one which is the one not working with my iPod.
    It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
    Please help

  • Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

    Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article.

  • I was trying to restore my itouch and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin

    i was trying to restore my itouch because it showed on my itouch the itunes bar on top and the charger on bottom so i went on itunes and when i pressed "restore" and then pressed "restore and update", another sign popped up saying "The ipod "ipod" could not be restored. The disk you are attempting is full. Removing files and empty the recycle bin will free up additional space. What do I do?!?!?! please help me ASAP

    Hi
    I followed this guy's instructions and it worked:
    http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
    I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
    Cheers for you help.
    Andy
    Message was edited by: bigbadandy

  • I cannot access facetime or messages on my Ipod touch anymore.  I have restarted, restored and it still is not working..any ideas?

    I cannot access facetime or messages on my Ipod touch anymore.  I have restarted, restored and it still is not working..any ideas?

    It asks for my apple ID and password when I try to access facetime or messages
    .  After I enter it brings me to an email to select-then verifies and brings me back to enter ID again. 

  • Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    Try:
    - Another cable
    - Another USB port
    - Reboot the computer
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

    Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

    Thank you for your response.
    After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
    Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
    up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
    Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email.

  • HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

    I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
    please advise me,
    best regards,
    Ahmed

    try to edit your host file ang delete any line that contain gs.apple.com

  • I had a problem with my iphone and had to restore and now i have lost all music from itunes any way to get it back ?

    i had a problem with my iphone and had to restore and now i have lost all music from itunes any way to get it back ?

    It should ne in itunes on your computer and included in your regular backup of your computer.
    If for some reason you have failed to backup your music, then - in the U.S only - you can get previous itunes purchases from the beta version of icloud.  Open itunes store, click Purchased, under Quick Links.

  • The soft (4.3) in my i4 is messed up, badly how i reinstall  ... i try to restore and says .. restore and update. download finishes 666.6 and after that it gives me an error

    the soft(4.3) in my i4 is messed up, badly. how i reinstall  ... i try to restore and says .. restore and update. download finishes 666.6 and after that it gives me an error

    I'm assuming error 3259. Temporarily disable ALL of your antispyware/antivirus software, open your firewall and try again.

  • Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200.
    These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    I would guess your iphone has been hacked ( jailbroken ) ring any bells ?

  • HT1476 I got my new phone in Dec and just now had the time to sync it. I was given the option of using as a new iphone or restoring to a previous and I hit restore and  now everything i dwn loaded over the last few months is gone. What can I do?

    I got my new phone in Dec and just now had the time to sync it. I was given the option of using as a new iphone or restoring to a previous and I hit restore and  now everything i dwn loaded over the last few months is gone along w all sms and photos. What can I do?

    Well, unless you made a backup BEFORE you hit the restore button, your data is gone.

  • HT201210 my iphone says activation error and i tryed restore and nothin really works what should i do?

    my iphone says activation error and i tryed restore and nothin really works what should i do?

    Did you just update the phone when this happened? Was the phone jailbroken or hacked to unlock it before it was updated?
    BTW, you cannot have iOS 6.1.4 on an iPhone 4; that version is only for the iPhone 5. Could this be your problem?

Maybe you are looking for

  • Changing numerical values in any object not working correctly

    I'm trying to create new parts and I want to adjust things like hole diameter, body length, offset height. When I go to change the numerical values......I highlight the numbers and start typing my new value and it just adds random numbers to the fiel

  • Install program or driver

    Hi I bought a new laptop with windows 8,1 (64bit). I can´t install my writer "Hp Color Laser Jet CP2025" because install CD dosent support windows 8,1(64bit). Please help me to get installing program för windows 8,1 for my product? Sincerely Azim Esk

  • Is there a way to do an "Or" in the Edit Pattern?

    For example, the social security number field. I want to be able to do numeric{999-99-9999}|numeric{999999999} in the Numberi Field type. Is this possible? Or do I have to change the type to Field Text?

  • IMovie 10.0.2 keeps failing during install

    I have been trying to update iMovie but it keeps failing during install. It gets nearly to the end, then I get the error "Cannot install Titles". I see in the reviews that this is happening to many people. I am running Mac OS 10.9.1. I can't run iMov

  • Palm treo 800w keeps syncing way too long

    I have had three of these phones so far.  It seems pop and exchange sync accts can be set up and work, then after about 2-3 months the phone goes crazy. It wants to exchange sync continuously. Totally eats the battery(even ext. life). All schedule pa