IPOD ERROR MESSAGE: Connect to your computer. Use Itunes to restore.

Whenever I turn my ipod on after its been off for a few hours the screen displays "Connect to your computer. Use Itunes to restore" and then goes blank. I turn the ipod back on again and it appears to work normally but the battery is showing close to zero even though it has been freshly charged!
I have restored the ipod several times as it suggests but this does not get rid of the error message. Is my ipod screwed? I'm surprised there are very few posts on this topic too...
I have a 30Gb ipod video running v1.2.1

I just found this support document which explains the issue exactly.
http://docs.info.apple.com/article.html?artnum=303915
Looks like a visit to Regent St is needed.
The reason why I am surprised about the lack of posts on this topic is that I can't believe my issue is so unique. Surely out of the millions of ipod users out there this exact same issue would have been reported more frequently.

Similar Messages

My ipod says "connect to your computer. use itunes to restore."

My ipod says "connect to your computer. use itunes to restore."
So I plug it into the computer and itunes says it needs to restore, so I click restore, everything seems to go fine, and it says the ipod needs to restart, it does, has a lil progress bar go across the ipod screen, then itunes detects the ipod again and says it needs to be restored again. This is an endless loop, anyone have any idea how to solve this problem?

Have you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore

"Connect to your computer, use iTunes to restore" loop! Please help!!

Everytime I try to turn on my iPod, it gives me the "Connect to your computer, use iTunes to restore" message so I use iTunes to restore but once it's "done" restoring, it tells me the iPod is still in Recovery Mode and needs to be restored. Someone told me to change the file to a Fat32 file but it's already a Fat32. Someone else suggested to change the drive letter but , unless I'm not doing it right, that's not working either. Any other suggestions?? Thanks!

Yes, it does need to recognize the iPod in order for you to do something like this.
Have you first tried working through these troubleshooting steps to get your iPod recognized in iTunes?
The Five R's
-Kylene

It says...connect to your computer, use itunes to restore..but it wont work

1st off: i own an ipod video. Ok, so when I turn on my ipod, this white screen comes up and it says connect to your computer, use itunes to restore. And then when I restore my ipod on itunes...it just keeps making me restore it over and over again. I dont no wat to do and I'm getting really frustrated. i need someone to tell me wat to do cause I just do the same thing over and over again, and it doesnt work. Please help me!!!

Have you had a chance to look at this troubleshooting page? Have a look at the bottom section that covers what to try if restoring doesn't work, it may be of some help: iTunes has detected an iPod in recovery mode - Use iTunes to restore

My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Connect to your computer.Use Itunes to restore!

Good Evening all,
I have the 30gig black video Ipod and I am having issues! All that its doing and nothing more is saying "Connect to your computer. Use Itunes to restore" Then it says the same thing in 3 other languages below. Hey that sound pretty simple but when I try and plug it in to my computer it says Do Not Disconnect in small writing. It was actually bigger earlier today. So I tried to run Ipod updater 2006-06-28 it just sits on the screen saying initializing... with absolutly no function. I tried the 5 r's to no avail. It seems I cant do a thing with it. Please help, someone!
30 gig Video Windows XP

Soory guys i just keep messing around and it finally started to work. Thanks.

Hy won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.

Why won't my ipod touch 5G connect to my computer or itunes? I've tried new USB cables, different USB ports and uninstalling itunes and reinstalling.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

My ipod touch is connected to the computer but itunes is not recognizing it. help please !

My ipod touch is connected to the computer but itunes is not recognizing it. I need help please. I've tried restarting both my ipod & the computer and also unistalling itunes and loading it again, nothing is working.

Assuming you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

TS2972 access your itunes on apple tv, turn on home sharing in itunes on your computer using "iTunes account"

I've had the apple tv 2 since the week it came out and haven't had much trouble with it until now. I haven't changed anything with my network settings. I have noticed the apple tv light seems to turn on at random times now when not being used. Now just about every time I try to access my iTunes library I get "To access your itunes on apple tv, turn on home sharing in itunes on your computer using (my account name)". My iTunes library is not listed. If I restart iTunes my computer with iTunes open will now be listed but when I select it it tries to connect them errors out. If I restart the computer then everything works fine. That is until next time I try to connect and I have to do it all over again. I don't want to have to restart my computer every time I use the apple tv. Any idea why this just started happening? Everything has worked until now. Bug in the latest iTunes maybe?
Thanks.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

I rebuild iPod Classics, I get one going, says use iTunes to restore, plug it into my computer, and the iPod shuts down! This is a first! Any ideas's?

I Restore iPods Classic's
All components are correct inside, correct numbers,
I plug it into the power source,
the Apple logo appears, then it goes
to the use iTunes to Restore.
COnnect it to the computer,
and the iPod icon doesn't show on the
iTunes page, and the iPod shuts down,
after twenty seconds, reboot it, same thing.
this is a first, any ideas?

Hello tsnovak!
Is English your first language? If not, I can help get someone who can speak your language to translate this article.
Tsnovak, you seem to be on a Apple Logo Loop. This has happened with several iPod generations. Contact Apple Support here: <https://www.apple.com/support/contact/>
Thanks!
- Ronní J.
Apple Support Communites

New iPod Nano isn't being recognized, with "Use iTunes to restore"

I got this new Nano yesterday and I took it out the box, tried it for a while, etc. I then installed iTunes 9 and after that everything was fine, so I plugged it in, hoping to sync it with my library and charge it. It did both for a while. Unfortunately, it was at this moment my PC decided lock up, and I had to use CAD to stop all the programs that were running, including iTunes, with the Nano still plugged in. Now the only functions of the Nano are to show the Apple logo for a bit, go to black and then show the "Use iTunes to restore" screen. I Googled and found that this means it needs to be formatted for Windows use. However, I plug it in and Windows refuses to recognize it, as does iTunes. However, it does connect when I press both the select and menu buttons (I tried to put it into disk mode, but this doesn't work) only to disconnect a few seconds later when iTunes tries to download the recovery software. Can anyone help? Nothing is working. Thanks.

I have also just installed my new Nano, had to upgrade to itunes V9, this worked eventually and then the nano locked up along with the PC. rebooted the PC, reset the Nano, all looked good until I tried to reconnect the Nano to the PC. it connected and then immediately disconnected and itunes gave an error saying that it couldn't read the ipod, try to reconnect.

Updated iPod to 1.2 , now it tells 'use itunes to restore'. How ?

Hello, sorry my english.
I have just updated my iPod nano from firmware 1.1.1 to 1.2 using latest iPod Updater 2006-06-28. It went ok.
Then i entered iTunes 6.0.5 and made an eject.
The iPod showed "OK to disconnect". I disconnected.
But now when I turn it on, it shows this message:
"Use iTunes to restore"
How can I do that? When I open iTunes it behaves like there is nothing wrong with my iPod, it lets me add and remove music with no stress. Also I can't find any option on iTunes to 'restore' my iPod. I know how to do that using the iPod Updater (restoring to factory settings) but I can find any 'restore' option on iTunes like my iPod warns.
Can anyone help me? Thank you.

I am having the same exact problem!! like first my ipod nano wouldnt be recognized then finally my itunes said updating ipod dont disconnect..after updating 477 songs it said ok to disconnect so i did nd den it got stuck in this screen that said use itunes to restore nd also it said dat in two otha languages..but im new at this and i have had like every problem there is to have but still can you explain to me wad to do. thanks loves. nicc<33*

Error message connecting a Vista Computer to WRT54G v6

I just bought a new computer and I am trying to connect it to the router by using EasyLink Connect.
I keep getting an error message that the computer doesn't have a wired connection to router. But it is connected correctly.
I disabled the firewall, but it didn't help.

I hope Embarq is a DSL connection ::
Configuration for DSL connection:-
Before doing the following steps, you have to connect the modem to the
router's Internet Port and the computer to the Ethernet Port Number 1.
1. Press and hold the reset button for 30 seconds.
2. Then, unplug the power keep holding down the reset button for
another 30 Seconds.
3. Plug back the power back in, and keep holding down the reset button
for 30 Seconds.
4. Release the reset button.
===================================================================
Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP ?. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then agian check the WAN Ip address .....
With these settings you will be able to go ONLINE!!! using the router wired as well as wireless.

I just upgraded to 4.0, but every time I try to log on, I get an error message that says "Your computer must be restarted to complete a previous upgrade of Firefox." I restarted three times and I still get that same message.

When I got the error message, I logged off and then signed back in to this same desktop computer. When that didn't change anything I shut it down and restarted it. No change, so I rebooted again without actually shutting the computer down, and again, no change. I can only access Firefox via Explorer when I log in as "Tech Support" on my computer instead of my own user name.

Hi,
Please try deleting the '''updates.xml''' file and the '''updates''' folder in the Firefox [http://kb.mozillazine.org/Installation_directory installation directory], if present.

Getting an error message when backing up Iphone using itunes. "iTunes could not back up the iphone, because an error occured"

More information
Error message:
Hope this helps.
We have an issue with the iphone as it currently can't connect to a wireless network so cannot back up to iCloud. So trying to backup to itunes before visiting the Apple store to get some help.

Hello sulty09,
Thanks for the question, and welcome to Apple Support Communities.
The following resource outlines the best steps to potentially resolve your issue with backing up in iTunes:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/TS2529
Thanks for thinking ahead!
Matt M.

IPOD ERROR MESSAGE: Connect to your computer. Use Itunes to restore.

Similar Messages

Maybe you are looking for